Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
If your train develops a fault, where would be deemed a suitable location to stop to deal with the fault. |
Stop at a station, a signa, clear off junction points to allow the signaller to run other trains past you whilst you attempt to rectify the fault. |
|
Where should you avoid stopping |
Avoid tunnels, viaducts, deep cuttings, over points or within level crossing controls |
|
What is the gtr fix or fail policy |
The objective is to get the train moving again or declare it a failure and request assistance ASAP to reduce delays to other trains |
|
Explain the 4 steps to fix or fail |
Stop in a safe and convenient location Inform signaller with defect within 2 minutes Inform customers of delay via PA Carry out basic cab checks. Check DRA,traction interlock, line light, VCB light, main air pressure, cab mcb’s, DMI, Mitrac, orange bils, try pan up reset if possible. |
|
If the fault is rectified, what must driver still do |
Submit a report to or phone fleet control at the next convenient point without causing further delays. |
|
What if initial checks prove unsuccessful |
Contact fleet control at three bridges immediately once signaller has been informed |
|
What will happen after 5 minutes if failure to rectify fault |
ROC will decide whether the 5 minute fix or fail policy will be implemented or whether fault investigation should continue. If still unable to fix a fitter may be sent out or failing that an assisting train to aid recovery. |
|
What must you do before walking/ examining the outside of your train? |
Ask the signaller to block adjacent lines and each a clear understanding as to which lines have been blocked and which remain open. |
|
If you are happy that the details are correct you should then |
Repeat your name/grade Location speaking from The reference number you were given. |
|
If you require an assisting train what must you do |
Contact the signaller ASAP. Agree what kind of assistance and from which direction Make sure thensignaller understands the problem, location and exactly what the assisting driver is required to do. |
|
What must you do once assisting train has been requested |
Secure train. Keys out, brake into emergency, cab door locked. Lay down any protection needed Check tail lights are illuminated if assistance is from rear Check a white light is displayed if coming from the front |