Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
54 Cards in this Set
- Front
- Back
Which FAR covers Repair Stations |
Part 145 |
|
What does the abbreviation STC stand for? |
Supplemental Type Certificate |
|
What does the abbreviation CFR stand for |
Code of Federal Regulations |
|
Which FAR covers the certification of airmen other than flight crew members? |
Part 65 |
|
Which FAR covers Airworthiness Standards, Aircraft Engines |
Part 33 |
|
Which FAR covers Airworthiness Standards, Propellers? |
Part 35 |
|
Which FAR covers the certification procedures for products and parts? |
Part 21 |
|
Airworthiness Directives is 14 CFR part? |
39 |
|
Which FAR covers maintenance, preventative maintenance, rebuilding and alteration? |
Part 43 |
|
Which FAR covers Definitions and abbreviations? |
Part 1 |
|
Airworthiness Standards: Normal, utility, Acrobatic, and Commuter category airplanes is 14 CFR part |
Part 23 |
|
What does the abbreviation TCDS stand for? |
Type Certificate Data Sheet |
|
What does the abbreviation FSDO stand for |
Flight Standards District Office |
|
What does the abbreviation AC stand for? |
Advisory Circular |
|
What does the abbreviation FAR stand for? |
Federal Aviation Regulations |
|
Which FAR covers Identification and Registration Markings? |
Part 45 |
|
What does the abbreviation FAA stand for? |
Federal Aviation Adminiatration |
|
Which FAR covers investigative and enforcement procedures? |
Part 13 |
|
Which FAR covers general operating flight rules? |
Part 91 |
|
What does the abbreviation AD stand for? |
Airworthiness Directive |
|
14 CFR Appendix _________ lists major Alterations, major repairs, and maintenance. |
Appendix A |
|
How do you determine the time frame which AD compliance is required? |
Read the AD |
|
The type of design of a aircraft, engine, or propeller can be altered by someone other than the manufacturer |
True |
|
What are Advisory Circulars? |
Non-regulatory Maintenance Information |
|
FAA Airworthiness Directives are issued in order to |
Return the device or aircraft to the condition specified for certification |
|
For what three products will you find Type Certificate Data Sheets |
Aircraft, Engine, and Propeller |
|
For all type certificated prior to January 1, 1958, The CAA issued documents known as (a) ___________, which contained technical information about aircraft type |
Specification sheets |
|
An aircraft that does not conform to it's Type Certificate Data Sheet is considered _____________. |
Non-conforming |
|
14 CFR part _________ governs the issuance of an Airworthiness Certificate |
Part 21 |
|
CFR 43, Appendix__________ shows scope and Detail of items to be included in an Annual and 100-hour inspection. |
Appendix D |
|
Placards required on a specific aircraft specified in the |
Aircraft TCDS's |
|
General Requirements are found in FAR Part |
part 3 |
|
The FAA issues or approves two types of data for aircraft. They are |
Approved and Acceptable |
|
What two FAA documents must be carried aboard the aircraft at all times? |
AFM and Airworthiness Certificate |
|
If an aircraft was type certificated May 7, 1959 the document containing the technical information will be in the appropriate |
TCDS |
|
The following words are an example of what kind of statement in a an AD? "Required within the next 25 hours time-in-service after the effective date of the AD, unless already accomplished. "(Which area of the AD) |
Compliance Time |
|
Primary responsibility for compliance with Airworthiness Directives lies with the |
Owner then A&P |
|
What FAA approved documents gives the leveling means to be used when weighing an aircraft? |
Type Certificate Data Sheet |
|
How often are AD updates issued to subscribers to the summary of Airworthiness Directives |
Bi-weekly |
|
What kinds of publications are used by aircraft manufactures to notify owners of design defects and product improvements |
Service bulletins, letters & Instructions |
|
With respect to maintenance records, the time from the moment an aircraft leaves the ground until it touches the ground at the end of the flight is called |
Time in service |
|
If an airworthy aircraft is sold, what is done with the Airworthiness Certificate |
It is transferred with the aircraft to the new owner |
|
You are asked to do a conformity inspection on your aircraft to see if you have the proper propeller and engine combination on your aircraft. Which source do you use? |
Aircraft Specifications or Type Certificate Data Sheet |
|
The replacement of aircraft components (except those considered preventative maintenance) with new, rebuilt, or repaired components of similar design is a |
Minor repair, and requires a log book entry |
|
Which Part would provide information on how fuel filler openings must be marked for an aircraft certificated under "normal" category? |
Part 23 |
|
Where is the record of compliance with Airworthiness Directives or manufactures' service bulletins normally indicated |
Aircraft maintenance records |
|
How often is the summery of AD's published |
Every two years |
|
Airworthiness Standards are 14 CFR part |
23,27,33,35 |
|
Where are technical descriptions of certified Propellers found? |
Propeller Type Certificate Data Sheets |
|
What is the manual that the manufacturer provides for technicians who perform work on the systems and components of an aircraft? |
Maintenance manual |
|
What provides a place for indicating compliance with FAA Airworthiness Directives or manufacturers' service bulletins? |
Aircraft Logs |
|
What part of the FAR's describes the performance characteristics that a small aircraft must demonstrate in order to be airworthy |
Part 23 |
|
A document carried in a aircraft that identifies the aircraft as one certificated under the appropriate part of the FAR's is a(n) |
Airworthiness Certificate |
|
Each AD contains four areas of information |
Compliance time, applicability, required action, effective date. |