Td's For Azc Showell To Be

Front 1

Operating commanders are authorized to take actions deemed necessary to ensure safe operations of assigned aviation systems per COMNAVAIRFORINST 4790.2 and what else?

Back 1

OPNAV 8000.16

Front 2

What refers to executable machine code that is produced by an assembler or compiler?

Back 2

Software

Front 3

What refers to static, uncompiled data that does not alter the software footprint?

Back 3

Datafiles

Front 4

What DO NOT provide authorization to modify aircraft, they only provide authorization to fly an aircraft in a certain configuration?

Back 4

Flight Clearance

Front 5

What, or parts thereof, shall not be used as parts of TD's?

Back 5

NAVAIR Technical Manuals

Front 6

NAVAIR uses how many types of TD's?

Back 6

Four

Front 7

What TD is the primary NAVAIR document for implementing a configuration change?

Back 7

Formal Change

Front 8

When an Interim Change TD is issued, a formal ECP(Engineering Change Proposal) shall be obtained within how many days from CCB( Change Control Board) approval to permit thorough review of all engineering and logistic elements of the change?

Back 8

180 Days

Front 9

What TD directs one-time inspection to determine if a given condition exists and specifies what action shall be taken if the condition is found?

Back 9

Bulletin

Front 10

Bulletins which restrict flight operations by requiring inspection prior to further flight, preflight, turn-around, daily inspection, next equipment use, or within the next ten flight hours are referred to as what?

Back 10

Grounding Bulletins

Front 11

The concept of what program is "Fleet Self-help"

Back 11

RAMEC (Rapid Action Minor Engineering Change)

Front 12

RAMEC (Rapid Action Minor Engineering Change) shall not be used to affect retrofit of, or to satisfy logistics requirements from what production changes?

Back 12

Class II

Front 13

Fleet activities must request RAMEC (Rapid Action Minor Engineering Change) sponsorship from their controlling custodians prior to prototyping one item as per what?

Back 13

COMNAVAIRFORINST 4790.2

Front 14

RAMEC (Rapid Action Minor Engineering Change) will not normally be incorporated by what level maintenance activity?

Back 14

D LEVEL (unless it is SE for D-LEVEL and I LEVEL use)

Front 15

The four TD categories are?

Back 15

Immediate Action, Urgent Action, Routine Action, and Record Purpose.

Front 16

What TD's are issued to authorized retrofit changes and provide detailed instructions for installing those changes?

Back 16

Routine Action

Front 17

Retrofit configuration changes to naval aviation systems are only made upon receipt of what?

Back 17

Approved TD's

Front 18

Tycoms/controlling custodians may authorized how many prototype installation of proposed changes per what instructions

Back 18

One Prototype installation/per COMNAVAIRFORINST 4790.2 and OPNAV 8000.16

Front 19

Navair may approve a waiver to permit change installations using what?

Back 19

Preliminary TD's

Front 20

Prior to approval of formal TD's what category is authorized for installation?

Back 20

Record Purpose Category TD's

Front 21

Does installation and removal of mission equipment require a TD?

Back 21

Installation and removal of mission equipment does not require a TD

Front 22

What refers to static uncompiled data that does not alter the software footprint?

Back 22

Data Files

Front 23

Threat Data, Navigation Data, Digital Terrain Data miscellaneous parametric data, and other data files that provide static input along with what manuals are considered data files?

Back 23

NAVAIR 00-25-300 & NAVAIRINST 4130.1, Naval Air Systems Command Configuration Management Policy

Front 24

What refers to executable machine code that is produced by an assembler or compiler?

Back 24

Software

Front 25

Software does not include what?

Back 25

The data that is processed by an application program or system software such as operational flight, mission planning for combat system data entry programs

Front 26

Changes that do not require reidentification of an item?

Back 26

Attrition changes

Front 27

A complete replacement of similar items with no impact on form, fit, or funchtion is known as what change?

Back 27

Attrition Change

Front 28

Attrition Changes are not driven as forced retro fit, but what type of TD is issued?

Back 28

No TD is issued

Front 29

If a TD is issued, a Attrition change becomes what?

Back 29

Forced Retrofit must abide by NAVAIR 00-25-300 (TD MANUAL)

Front 30

Who issues TD's?

Back 30

Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)

Front 31

What shall not be used as part of TD's?

Back 31

Technical Manuals

Front 32

What shall not be used to incorporate configuration changes?

Back 32

Local Engineering Specifications (LES's)

Front 33

Flight Clearances do not provide what?

Back 33

Authorization to modify aircraft

Front 34

Flight clearances provides what?

Back 34

Authorization to fly an aircraft in a certain configuration

Front 35

How many types of TD's does NAVAIR use?

Back 35

Four

Front 36

What are the four type of TD's?

Back 36

Formal Change, Interim Change, Bulletin, Rapid Action Minor Engineering Change (RAMEC)

Front 37

What is the primary NAVAIR document for implementing a configuration change?

Back 37

Formal Change TD

Front 38

What contains instructions and information which directs accomplishment and recording of a material change, a repositioning, modification, or an alteration in the characteristics of a system?

Back 38

Formal Change TD

Front 39

A Formal Change TD shall be used to direct what?

Back 39

Parts of material be added, removed, altered, relocated, or changed from an existing configuration.

Front 40

If a change needs urgency incorporations be initiated without delay following a Configuration Control Board (CCB) approval, which TD type would it be?

Back 40

Interim Change TD

Front 41

Proposed changes are submitted to NAVAIR in message TD format and after approval, are disseminated immediately by message is designated as what type TD?

Back 41

Interim Change TD

Front 42

How are Interim Change TD's filed?

Back 42

In the same manner as Formal Change TD's

Front 43

When an Interim Change TD is issued a formal ECP shall be obtained within how many days from CCB approval?

Back 43

180 Days

Front 44

What happens after ECP review and CCB approval of an Interim Change TD?

Back 44

A Formal Change TD shall be issued to supersede the Interim Change.

Front 45

A one time inspection to determine if a given condition exists and specifies what action shall be taken if the condition is found is known as what type of TD?

Back 45

Bulletin

Front 46

A bulletin may contain instructions for corrective action using approved repair procedures, provided what is not involved?

Back 46

Provided no change in configuration

Front 47

How are Bulletins issued?

Back 47

Naval Messages or by letter in message format when enclosures are required.

Front 48

Bulletins which restrict flight operations are known as what?

Back 48

Grounding Bulletins

Front 49

What Bulletin causes for inspection prior to the next 10 flight hours?

Back 49

Grounding Bulletin

Front 50

How does a Grounding Bulletin get approved?

Back 50

Through CNO, CMC, Type Commanders/Controlling Custodians via Red Stripe Memorandum

Front 51

Red Strip processes are found in what NAVAIRINST?

Back 51

NAVAIRINST 5216.11 series

Front 52

Significant operational impact due to either imposed flight/operational limitations or to severe/unique impact on logistics support are referred to as what?

Back 52

Flight Restriction Bulletins

Front 53

What TD type is known as

"Self Help"

Back 53

Rapid Action Minor Engineering Change (RAMEC)

Front 54

What level of maintenance is not authorized except when it is used on both levels?

Back 54

D-LEVEL

Front 55

Proposed RAMECs are initiated by who?

Back 55

Fleet Activities

Front 56

Ramecs shall not be used to affect retrofit of, or to satisfy logistics requirements resulting from what production change?

Back 56

Class II

Front 57

Fleet Activities must request RAMEC sponsorship from who?

Back 57

Controlling Custodians

Front 58

RAMECs are issued how?

Back 58

Naval Message or Letters (in message format) as Change TD's

Front 59

RAMECS are issued within how many working days of CCB approval?

Back 59

Seven working days

Front 60

RAMECS are considered what type of TD?

Back 60

Formal TD

Front 61

What happens when a RAMEC is modifying an item of supply?

Back 61

Re-identification of the modified item may be required aka new part number.

Front 62

ISSC shall obtain cost to update master drawings are held by whom?

Back 62

Contractor who agrees to update drawings to reflect change

Front 63

If master drawings cannot be located, the RAMEC may be forwarded where?

Back 63

NAVAIR Headquarters (HQ) for approval

Front 64

A what must be confined to a simple change that can be easily and rapidly incorporated, and does not require extensive technical review or work effort for approval?

Back 64

RAMEC (RAPID ACTION MINOR ENGINEERING CHANGE)

Front 65

RAMEC must be authorized for incorporation by what maintenance activities including regular contractor maintenance support at those actives before approval?

Back 65

O or I Level activies

Front 66

D level incorporation of RAMECs are OR are not authorized except in the case of RAMECs for support equipment which is used at both the I & D levels

Back 66

ARE NOT AUTHORIZED

Front 67

If a TD is being incorporated at D Level but has an outstanding RAMEC can D Level incorporate that RAMEC?

Back 67

Yes

Front 68

What is the maximum amount of man hours a RAMEC can have?

Back 68

eight

Front 69

The total cost of material required for a RAMEC should not exceed how much?

Back 69

$1500

Front 70

In order to receive approval from NAVAIR RAMECs but be complied with as directed by the applicable TD but no later when what?

Back 70

Next Calendar/Phase inspection requiring access to area/zone containing item/or induction

Front 71

In order to receive approval from NAVAIR RAMECs must not apply to SM&R coded item with D in what position?

Back 71

Fourth Position

Front 72

How many TD categories are there?

Back 72

Four

Front 73

What are the four TD categories

Back 73

Immediate Action, Urgent Action, Record Purpose, & Routine Action

Front 74

A Formal Change TD issued to supersede an Interim TD, shall be assigned what TD category?

Back 74

The same as Interim TD.

Front 75

Which TD category is assigned when unsafe conditions exist which if uncorrected could result in fatal or serious injury to personnel, or extensive damage or destruction of valuable equipment?

Back 75

Immediate Action

Front 76

What TD type is primarily used for the category of Immediate Action?

Back 76

Grounding Bulletins

Front 77

Assignment of whatcategoryshall be justified by incident, accident, hazard, or similar reports, and must be concurred in by CNO/CMC.

Back 77

Immediate Action TD