Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
14 Cards in this Set
- Front
- Back
The pipe that connects the steam header to the boiler return connection is the |
Equalizing line |
|
A thermostatic steam trap that fails in the closed position would cause a heating unit to become |
Waterlogged |
|
The device that controls the pressure in a low pressure steam boiler is called a |
Pressuretrol |
|
A diamond on an instrument loop diagram encloses information concerning |
Set point |
|
Which type of orfice plate is designed to measure flow of liquids containing solids |
Segmental |
|
Which component in a closed control loop is the primary element |
Sensor |
|
The main cause of undercutting is |
Too fast of a travel rate |
|
What is the function of the covering on the electrodes during the process of “shielded metal arc welding” |
All |
|
When arranging weld coupons for testing position 6G |
Axis of pipe should be at 45 degree |
|
Both soldered and brazed joints are made by heating a properly prepared joint to the proper temperature and the flowing of a filler metal by means of |
Capillary action |
|
When changing pipe sizes in the horizontal supply or return lines of a two pipe hit water heating system is |
Eccentric reducers, flat on top |
|
A triple duty valve is installed |
In the hot water heating pumps discharge piping |
|
An oil separator is required on systems using |
Ammonia |
|
In the cooling cycle which component throttles the flow of refrigerant |
Expansion device |