• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/291

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

291 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
4D Systems 4Display Shield 128
The 4Display-Shield-96 provides an easy way of interfacing the popular uOLED-128-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
The 4Display-Shield-96 provides an easy way of interfacing the popular uOLED-128-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
4d.jpg
4D Systems 4Display Shield 144
The 4Display-Shield-144 provides an easy way of interfacing the popular uOLED-144 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
The 4Display-Shield-144 provides an easy way of interfacing the popular uOLED-144 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
4d.jpg
4D Systems 4Display Shield 160
The 4Display-Shield-160 provides an easy way of interfacing the popular uOLED-160-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
The 4Display-Shield-160 provides an easy way of interfacing the popular uOLED-160-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
4d160.jpg
4D Systems 4Display Shield 96
The 4Display-Shield-96 provides an easy way of interfacing the popular uOLED-96-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
The 4Display-Shield-96 provides an easy way of interfacing the popular uOLED-96-G1 display module to the Arduino and compatible boards. The unit comes with the uOLED-160-G1 module and a 5 way multiswitch joystick.
4d.jpg
Adafruit Industries 2.8" TFT Touch Shield
Touchscreen display shield with microSD card socket with 240x320 pixel resolution 2.8" diagonal TFT LCD. White LED backlight. 18-bit colour (262,000 different shades). Resistive touchscreen.
Touchscreen display shield with microSD card socket with 240x320 pixel resolution 2.8" diagonal TFT LCD. White LED backlight. 18-bit colour (262,000 different shades). Resistive touchscreen.
tftshield.jpg
Adafruit Industries Ethernet Shield
This is a shield that provides a lot of flexibility in adding Ethernet/Internet connectivity to Arduino. You can use either an XPort module or a WIZnet module as the "engine". Both modules have pros and cons, so you can decide which is better for ...
This is a shield that provides a lot of flexibility in adding Ethernet/Internet connectivity to Arduino. You can use either an XPort module or a WIZnet module as the "engine". Both modules have pros and cons, so you can decide which is better for you.   One option is you can go with a XPort, XPort direct, or XPort Direct+. There is a lot of example code for the XPort, and one of the benefits is that it has a preassigned MAC address & has built-in DHCP. That means its easy to plug in your project into a new network without having to reconfigure it or mess with a router. The XPorts use serial protocols to communicate, and are best for straight-up Internet host or client setup. However you can only have one connection at a time.   Another option is the newer WIZnet 811MJ module, based on the W5100 chip. The WIZnet module is compatible with the official Arduino Ethernet library, which is easy to use and very powerful. However it does not have DHCP built-in.
xport.jpg
Adafruit Industries GPS Shield
This shield supports any of four popular GPS modules and stores data on a standard DOS-formatted SD flash memory card. Simply plug it into your computer when you've finished your data capture and the plain text files are ready for importing into G...
This shield supports any of four popular GPS modules and stores data on a standard DOS-formatted SD flash memory card. Simply plug it into your computer when you've finished your data capture and the plain text files are ready for importing into Google Earth, GPSvisualizer, or a spreadsheet.
gps.jpg
Adafruit Industries Logger Shield
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.  Real time clock (RTC) keeps the time going even when the Arduino is unplugged.  Prototyping area for soldering connectors...
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.  Real time clock (RTC) keeps the time going even when the Arduino is unplugged.  Prototyping area for soldering connectors, circuitry or sensors.  Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
logger.jpg
Adafruit Industries Motor Shield
Full-featured motor control shield that will be able to power many simple to medium-complexity projects.  2 connections for 5V "hobby" servos connected to the Arduino's high-resolution dedicated timer.
Full-featured motor control shield that will be able to power many simple to medium-complexity projects.  2 connections for 5V "hobby" servos connected to the Arduino's high-resolution dedicated timer.
mshield.jpg
Adafruit Industries NFC/RFID Shield
A useful shield for NFC and RFID communication
A useful shield for NFC and RFID communication
nfc-rfid.jpg
Adafruit Industries Proto Screwshield
A dual-purpose shield with a 0.1" grid prototyping area and also extends the Arduino pins to screw terminal blocks.   The stackable wing design allows it to fit under other shields and still get easy access to the analog and digital ports of the ...
A dual-purpose shield with a 0.1" grid prototyping area and also extends the Arduino pins to screw terminal blocks.   The stackable wing design allows it to fit under other shields and still get easy access to the analog and digital ports of the Arduino. The ScrewShield can be stacked above or below most other shields.
protoscrewshield.jpg
Adafruit Industries Proto Shield
This shield is designed to make prototyping on your Arduino easy by giving you space to add your own parts without requiring a custom shield PCB.
This shield is designed to make prototyping on your Arduino easy by giving you space to add your own parts without requiring a custom shield PCB.
protoshield.jpg
Adafruit Industries Wave Shield
This shield can play up to 22KHz, 12bit uncompressed audio files of any length. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read from a commonly-available SD/MMC card. Volume can be controlled with the onboard...
This shield can play up to 22KHz, 12bit uncompressed audio files of any length. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read from a commonly-available SD/MMC card. Volume can be controlled with the onboard thumbwheel potentiometer. Audio is played asynchronously as an interrupt, so the Arduino can perform tasks while the audio is playing.   Output is mono into both left and right channels on a standard 3.5mm headphone jack, and there are connections for a directly-connected speaker which is disabled when the headphones are unplugged. A driver library and example files are available.
wave.jpg
AeroQuad AeroQuad Shield v1.8
AeroQuad Shield is intended for use creating Quadrotor Helicopters controlled by an Arduino.   The AeroQuad Shield v1.8 allows you to connect the ITG 3200 triple axis gyro and the BMA 180 triple axis accelerometer breakout boards to an Arduino Duemilanove to create a 6 degree of freedom inertial measurement unit (IMU). The pinouts from the shield to the Arduino are directly compatible with the AeroQuad quadrocopter flight control software, and can also be easily adapted to any application where absolute angle position is required.   Note: The images on the AeroQuad site have an explicit message prohibiting their re-use. I need an image for this shield that I have permission to use.
shield-no-image.png
AeroQuad AeroQuad Shield v2.0
AeroQuad Shield is intended for use creating Quadrotor Helicopters controlled by an Arduino.   The AeroQuad Shield v2.0 allows you to easily connect the ITG 3200 triple axis gyro and the BMA 180 triple axis accelerometer breakout boards to an Arduino Mega to create a 6 degree of freedom inertial measurement unit (IMU). Additionally other I2C sensors are directly supported: the BMP 085 barometer for altitude determination and the HMC 5843 magnetometer for heading hold.   Note: The images on the AeroQuad site have an explicit message prohibiting their re-use. I need an image for this shield that I have permission to use.
shield-no-image.png
Andre Concalves Audio Input Shield
Envelope follower is a common term for analog modular synthesizer users. It's used to detect the amplitude variations of an incoming signal to produce a control signal that resembles those variations, ie: it follows the audio amplitude envelope cr...
Envelope follower is a common term for analog modular synthesizer users. It's used to detect the amplitude variations of an incoming signal to produce a control signal that resembles those variations, ie: it follows the audio amplitude envelope creating a voltage output that resembles the audio signal volume, in this case between 0 and +5 volts.
env.jpg
Andre Concalves H-bridge
The H-Bridge Shield can control large bi-directional DC motors.
The H-Bridge Shield can control large bi-directional DC motors.
hbridge.jpg
antrax Datentechnik GSM GPRS GPS Shield
Allows Arduino to use GSM (mobile communication) and GPS functionality (navigation), for example  to:
Allows Arduino to use GSM (mobile communication) and GPS functionality (navigation), for example  to:
gsm.jpg
Applied Platonics Analog Input Shield
The Analog Input Shield gives you 48 analog inputs, with +5V and Ground next to every input pin.
The Analog Input Shield gives you 48 analog inputs, with +5V and Ground next to every input pin.
an.jpg
ArduCapSense ArduCapSense
The ArduCapSense Shield adds 8 capacitive sensing buttons and an audio output jack to your Arduino. Uses the Arduino CapSense library written by Paul Badger.   Use the buttons to do any of the following:
The ArduCapSense Shield adds 8 capacitive sensing buttons and an audio output jack to your Arduino. Uses the Arduino CapSense library written by Paul Badger.   Use the buttons to do any of the following:
capsense.jpg
Arduino Ethernet Shield v4.0
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socke...
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
ArduinoEthernetShield.jpg
Arduino Ethernet Shield v5.0
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socke...
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.   Version 5.0 includes a microSD slot in place of the SD slot used in previous versions.
ethernet.jpg
Arduino Motor Shield
Control motors from an Arduino.   This shield may no longer be available, or may never have been produced commercially. It appears to be a prototype that never went into production in this form, although an updated version was produced: blushingb...
Control motors from an Arduino.   This shield may no longer be available, or may never have been produced commercially. It appears to be a prototype that never went into production in this form, although an updated version was produced: blushingboy.net/p/motorShieldV3/
MotorShield.jpg
Argent Data Systems Radio Shield
The Radio Shield provides AX.25 packet radio send and receive capability, a prototyping area, and an HD44780-compatible LCD interface.   Documentation is available at wiki.argentdata.com.
The Radio Shield provides AX.25 packet radio send and receive capability, a prototyping area, and an HD44780-compatible LCD interface.   Documentation is available at wiki.argentdata.com.
radioshield.jpg
AsyncLabs FlashShield
Provides an additional 16Mbit of serial flash store capability. Useful for storing sensor data or web page content to be served via an Ethernet or WiFi shield.
Provides an additional 16Mbit of serial flash store capability. Useful for storing sensor data or web page content to be served via an Ethernet or WiFi shield.
flash.jpg
AsyncLabs WiShield v1.0
Adds WiFi networking support to Arduino.
Adds WiFi networking support to Arduino.
wishield1.jpg
AsyncLabs WiShield v2.0
Adds WiFi networking support to Arduino.
Adds WiFi networking support to Arduino.
wishield2.jpg
Batsocks 6 Button Shield
A small 6 button shield for game playing, suitable for left and right handed people.
A small 6 button shield for game playing, suitable for left and right handed people.
6-button.jpg
Batsocks TellyMate Shield
Black and white TV output from your Arduino. Includes PAL or NTSC Composite Video.
Black and white TV output from your Arduino. Includes PAL or NTSC Composite Video.
tellymate.jpg
Ben Combee RGB LED Shield
Uses three TI TLC5940 PWM LED driver ships to drive a 4x4 array of RGB LEDs. Each color is controlled by a different chip so you can adjust the reference resistors for the appropriate current. This also includes mounting positions for for three ge...
Uses three TI TLC5940 PWM LED driver ships to drive a 4x4 array of RGB LEDs. Each color is controlled by a different chip so you can adjust the reference resistors for the appropriate current. This also includes mounting positions for for three general-purpose buttons that are connected to ground, and a reset button. The TLC5940 chips are not directly connected to any Arduino pins, but a header is provided for you to make a manual connection depending on the needs of your sketch.
rgbs.jpg
Bhasha Technologies Seven Segment Relay Shield
Combination of relay output and a 5-digit 7-segment display. Features:
Combination of relay output and a 5-digit 7-segment display. Features:
7-seg-relay-shield.jpg
Bhasha Technologies Xbee Shield
Zigbee shield.
Zigbee shield.
xbee.jpg
Bliptronics Spectrum Analyzer Shield
You can make an Arduino perform certain actions depending on the types of audio it receives. Sound is broken down into seven frequency bands and the peak level for each band can be read. These levels can be displayed as a graphic equalizer, like y...
You can make an Arduino perform certain actions depending on the types of audio it receives. Sound is broken down into seven frequency bands and the peak level for each band can be read. These levels can be displayed as a graphic equalizer, like you would see on an audio system or a car stereo. This task can be performed in software as a Fourier analysis, but this shield does it for you very quickly.
spectrum.jpg
Blushing Boy Smapler Shield v2
Designed to make it easy to build generative music intruments, small samplers, SID instruments or digital synths.
Designed to make it easy to build generative music intruments, small samplers, SID instruments or digital synths.
smapler.jpg
Carlos Neves pHduino
A pH meter shield for a combined glass electrode pH sensor.   PCB: Creative Commons 3.0.  Source code: GPLv2.
A pH meter shield for a combined glass electrode pH sensor.   PCB: Creative Commons 3.0.  Source code: GPLv2.
ph.jpg
Chesters Garage Power LED Shield
This shield drives and controls power LEDs (LEDs rated 1W and up). In addition to PWM dimming control, the output current of each channel is adjustable with a trim-potentiometer for driving LEDs at less than 1000mA.   The PWM pin for each channel...
This shield drives and controls power LEDs (LEDs rated 1W and up). In addition to PWM dimming control, the output current of each channel is adjustable with a trim-potentiometer for driving LEDs at less than 1000mA.   The PWM pin for each channel is jumper-selectable and any combination of pins can be assigned. For safety and proper operation, the drivers are electrically isolated from the Arduino pins by opto-couplers on each channel. The shield also includes a 5V regulator that can power the Arduino.
power.jpg
Chips To Bits Storage Shield
The Storage Shield is a mass storage device for the Arduino, and Arduino Mega. Data on the SD Card is stored in a standard FAT format, which means the data on the card can be read by any PC using a standard SD Card reader.   The Storage Shield al...
The Storage Shield is a mass storage device for the Arduino, and Arduino Mega. Data on the SD Card is stored in a standard FAT format, which means the data on the card can be read by any PC using a standard SD Card reader.   The Storage Shield allows for a mass storage solution that has a low memory usage, and uses a minimal number of pins on the Arduino. The library for the Storage Shield is designed so only the functions used will be included into the final program.   Stacking headers allow for use of other shields in combination with the Storage Shield.   All the file and disk management is handled by an Atmega328 located on the Storage Shield. All the disk I/O, file access, and Real Time Clock activities are handled by the on-board processor.   Features:
storage.jpg
Circuit Ideas Design 3.2" Touchscreen Shield
Display time logger application shield.
Display time logger application shield.
tft240.jpg
Circuits At Home USB Host Shield
This shield adds USB Host capabilities to the Arduino. Comes in four different configurations. Software support for new devices is constantly added; at the moment, code for USB keyboard and PS3 controller are ready with Bluetooth and digital camer...
This shield adds USB Host capabilities to the Arduino. Comes in four different configurations. Software support for new devices is constantly added; at the moment, code for USB keyboard and PS3 controller are ready with Bluetooth and digital cameras in the works.
usb-host.jpg
Circuits At Home USB Host Shield v2.0
This is revision 2.0 of the USB Host Shield. Thanks to new interface layout it is now compatible with more Arduinos: not only UNO and Duemilanove, but also the Mega and Mega2560.
This is revision 2.0 of the USB Host Shield. Thanks to new interface layout it is now compatible with more Arduinos: not only UNO and Duemilanove, but also the Mega and Mega2560.
usb.jpg
CISECO ProtoX Shield
Prototyping board with SMT pads and serial breakout.
Prototyping board with SMT pads and serial breakout.
protox.jpg
CISECO PWM Shield
The PWM/MOSFET shield provides two very high power channels for the switching or Pulse Width Modulation of DC current. Ideally suited to motor, lighting and heating control. Includes dual 55 Amp MOSFETs and driver IC.
shield-no-image.png
CISECO Relay Shield
10 Amp power relay.
shield-no-image.png
CISECO XBee Shield
This new and improved shield has extra features employed to fix those niggles within the existing XBee shield designs and offer more to the RF beginner.   The spare space on the board has additional tracks for the easy addition of a range of basi...
This new and improved shield has extra features employed to fix those niggles within the existing XBee shield designs and offer more to the RF beginner.   The spare space on the board has additional tracks for the easy addition of a range of basic devices to complete a fully functioning wireless sensor.   Changes compared to the standard XBee shield:
xbs.jpg
Collin Schulz DTMF Shield
A simple Arduino shield to decode DTMF (Dual-Tone Multi-Frequency) tones using an audio input. This shield can reliably control an Arduino via ham radio.
A simple Arduino shield to decode DTMF (Dual-Tone Multi-Frequency) tones using an audio input. This shield can reliably control an Arduino via ham radio.
dtmf.jpg
Conductive Resistance Protoshield
This Prototyping shield breaks out all pins on the Arduino for prototyping use in an accessible way. All pins are available with screw terminals on either side of the shield, and digital pins D2 to D13 have been made accessible via servo headers. ...
This Prototyping shield breaks out all pins on the Arduino for prototyping use in an accessible way. All pins are available with screw terminals on either side of the shield, and digital pins D2 to D13 have been made accessible via servo headers. The shield features a power select header and long-tail header plugs so it can sit nicely in an Arduino and provide additional shield compatibility. Shield also has a wide bed of prototyping vias with a set of power rails down the center.
proto.jpg
Control Connection DOGS102 LCD Shield
LCD shield based on DOGS102W display from Electronic Assembly:
LCD shield based on DOGS102W display from Electronic Assembly:
dogs102.jpg
Creatron Inc Idea Shield
Note: I have almost no data on this shield, and I can't find a web page about it so I'm just linking straight to the maker for now. The name is also in dispute: the PCB clearly states "IdeaShield", but the packaging says "Ideal shield". I'm taking...
Note: I have almost no data on this shield, and I can't find a web page about it so I'm just linking straight to the maker for now. The name is also in dispute: the PCB clearly states "IdeaShield", but the packaging says "Ideal shield". I'm taking the PCB as the authoritative reference.
ideashield.jpg
Critical Velocity Accelerometer Shield
Integrates an Analog Devices ADXL335 3-axis accelerometer into an Arduino compatible shield. 3 analog outputs for the X,Y and Z axes. +/3 g range per axis.
Integrates an Analog Devices ADXL335 3-axis accelerometer into an Arduino compatible shield. 3 analog outputs for the X,Y and Z axes. +/3 g range per axis.
accshield.jpg
Critical Velocity IMU Shield, 6 DOF Accel/Gyro
The Critical Velocity IMU (Inertial Measurement Unit) Shield provides 6 degrees of freedom - X, Y, Z acceleration, and angular yaw, pitch and roll rate sensing.   Full scale accelerometer range is +/- 3 g, and the gyroscope has a selectable range...
The Critical Velocity IMU (Inertial Measurement Unit) Shield provides 6 degrees of freedom - X, Y, Z acceleration, and angular yaw, pitch and roll rate sensing.   Full scale accelerometer range is +/- 3 g, and the gyroscope has a selectable range of +/- 300 deg/sec or +/ 1200 deg/sec.
imu.jpg
Critical Velocity LCD Shield
Integrates two 16 pin headers for use with Hitachi HD44780 compatible LCDs. Connections to a small speaker and push button are brought out to a header for easy prototyping.   Available as a kit including the components necessary to build the LCD ...
Integrates two 16 pin headers for use with Hitachi HD44780 compatible LCDs. Connections to a small speaker and push button are brought out to a header for easy prototyping.   Available as a kit including the components necessary to build the LCD shield, except for the LCD. Any Hitachi HD44780 compatible LCD can be used as long as the header pins are in a single row.
lcdshield.jpg
Critical Velocity MonsterMux 32 Channel Analog Multiplexer Shield
The MonsterMux32 Arduino-Compatible Shield Kit allows you to connect up to 32 analog channels into a single analog input pin on the Arduino board. 6 digital pins control which input is connected to the Arduino.
The MonsterMux32 Arduino-Compatible Shield Kit allows you to connect up to 32 analog channels into a single analog input pin on the Arduino board. 6 digital pins control which input is connected to the Arduino.
monstermux32.jpg
Critical Velocity Terminal Block Shield
Breaks out each pin into its own high quality rising-clamp terminal block connector for easy hookup to external devices. 30 terminal connections in total.
Breaks out each pin into its own high quality rising-clamp terminal block connector for easy hookup to external devices. 30 terminal connections in total.
tshield.jpg
Critter and Guitari Pocket Piano Synth Shield
This is a board for making the Arduino into a portable stand alone music synthesizer. It plugs directly into the Arduino board and provides 25 multiplexed keys (2 full octaves), 4 pots, status LED, reset switch, digital to analog converter IC, and...
This is a board for making the Arduino into a portable stand alone music synthesizer. It plugs directly into the Arduino board and provides 25 multiplexed keys (2 full octaves), 4 pots, status LED, reset switch, digital to analog converter IC, and a RCA audio jack.
pocket-piano.jpg
Curious Inventor FM Radio Shield
FM receiver that allows you to control the station digitally, read signal strength, and obtain RDS info including artist, song, and station call-sign.
FM receiver that allows you to control the station digitally, read signal strength, and obtain RDS info including artist, song, and station call-sign.
fmradio.jpg
Curious Inventor Stribe Multiplexer Shield
Based on the 4051 analog switch, this Shield lets you read up to 13 analog channels, and provides the connections for the Stribe1 ribbon cable and data line (screw terminal). Comes as a kit.
Based on the 4051 analog switch, this Shield lets you read up to 13 analog channels, and provides the connections for the Stribe1 ribbon cable and data line (screw terminal). Comes as a kit.
stribe.jpg
CuteDigi Li-Ion Battery Shield
This shield is used to provide a rechargable battery pack for the Arduino.   The mini-USB port is used to charge a Li-Ion or Lo-Ion poly battery. There are LEDs showing the charge status.   6 big mounting holes can help you easily fix the batter...
This shield is used to provide a rechargable battery pack for the Arduino.   The mini-USB port is used to charge a Li-Ion or Lo-Ion poly battery. There are LEDs showing the charge status.   6 big mounting holes can help you easily fix the battery pack.   For a 600mAH battery, it takes about half hour to charge.
li-ion.jpg
CuteDigi Negative Voltage Generation Shield
This shield generates negative voltage from the Arduino supply rails. Handy if you need negative voltage.
This shield generates negative voltage from the Arduino supply rails. Handy if you need negative voltage.
negvoltage.jpg
CuteDigi Quad-band GPRS/GSM Shield
This is an Arduino Shield for SM5100 quad-band GSM/GPRS module. The module is included.
This is an Arduino Shield for SM5100 quad-band GSM/GPRS module. The module is included.
gprs-gsm.jpg
CuteDigi RS232 Shield
Adds an RS232 serial port to your Arduino.
Adds an RS232 serial port to your Arduino.
serial.jpg
CuteDigi Smart Outlet LCD Shield
This is a smart outlet with LCD. You can control the embedded triac by toggling D9 of Arduino. You can also do dimming. A 16x2 LCD is provided so that you can use it to show the status. Two buttons are provided to interact with Arduino. Includes c...
This is a smart outlet with LCD. You can control the embedded triac by toggling D9 of Arduino. You can also do dimming. A 16x2 LCD is provided so that you can use it to show the status. Two buttons are provided to interact with Arduino. Includes current-sensing.   Together with the Xbee shield or WiFi shield, remote control and sensing of smart outlet can be achieved.
smartoutlet.jpg
Damien Good SNES APU Shield
Shield to interface a SNES audio processing unit (APU) to a PC, through the Arduino. This allows SPC files like those found on snesmusic.org to be played on an actual SNES APU, rather than emulating them.
Shield to interface a SNES audio processing unit (APU) to a PC, through the Arduino. This allows SPC files like those found on snesmusic.org to be played on an actual SNES APU, rather than emulating them.
snes-apu.jpg
Dexter Industries GPS Shield
The GPS Shield is powered by the SUP500F Receiver from Skytraq. The receiver is a 65 channel, 10 Hz Receiver with a smart antenna built in. This all-in-one GPS receiver does not require any antennae. Serial interface is via 3V LVTTL. It has pinnin...
The GPS Shield is powered by the SUP500F Receiver from Skytraq. The receiver is a 65 channel, 10 Hz Receiver with a smart antenna built in. This all-in-one GPS receiver does not require any antennae. Serial interface is via 3V LVTTL. It has pinning options for SRAM battery and jumpers.   This is an all-in-one GPS: does not require antenna.
gps.jpg
DFRobot 1A Motor Shield
Uses the L293 chip to drive two 7-12V DC motors with up to 1A current.
Uses the L293 chip to drive two 7-12V DC motors with up to 1A current.
1amotor.jpg
DFRobot 2A Motor Shield
Uses the L293 chip to drive two 7-12V DC motors with up to 2A current.   The shield can be powered directly from the Arduino or from an external power source.
Uses the L293 chip to drive two 7-12V DC motors with up to 2A current.   The shield can be powered directly from the Arduino or from an external power source.
2amotor.jpg
DFRobot Ethernet Shield
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socke...
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.   The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
ethernet.jpg
DFRobot Graphic LCD4884 Shield
The LCD4884 Shield provides a 48x48 pixel display. It is able to display English, Chinese, and images. It also integrates a 5 DOF joystick. The shield has 6 Digital IO and 5 Analog IO.
The LCD4884 Shield provides a 48x48 pixel display. It is able to display English, Chinese, and images. It also integrates a 5 DOF joystick. The shield has 6 Digital IO and 5 Analog IO.
graphic.jpg
DFRobot Input Shield
The Joystick / Input Shield for Arduino include a two axis mini joystick (with moment switch) as well as two colored push buttons.
The Joystick / Input Shield for Arduino include a two axis mini joystick (with moment switch) as well as two colored push buttons.
input.jpg
DFRobot Interface Shield
This shield supports multiple interfaces:
This shield supports multiple interfaces:
interface.jpg
DFRobot IO Expansion Shield v5.0
Supports:
Supports:
io_expansion.jpg
DFRobot LCD Shield
Includes a 16x2 HD44780 compatible LCD with white character & blue backlight, plus input buttons.   Uses the Arduino LCD4Bit library.
Includes a 16x2 HD44780 compatible LCD with white character & blue backlight, plus input buttons.   Uses the Arduino LCD4Bit library.
lcd.jpg
DFRobot Mega I/O Expansion Shield V1.0
The sensor expansion board is able to easily connect a number of commonly used sensors.   Note: On the PCB itself this shield is labelled "Sensor Shield", but on the webpage it's listed as "Mega IO Expansion Shield". I have used the title on the ...
The sensor expansion board is able to easily connect a number of commonly used sensors.   Note: On the PCB itself this shield is labelled "Sensor Shield", but on the webpage it's listed as "Mega IO Expansion Shield". I have used the title on the page as the definitive name, but it may also be referred to as a "Sensor Shield" in some contexts.
mega.jpg
DFRobot Mega I/O Expansion Shield V1.1
The sensor expansion board is able to easily connect a number of commonly used sensors. Also has breakouts for Xbee/Bluetooth Bee and SD card module, and includes a 3.3V output.
The sensor expansion board is able to easily connect a number of commonly used sensors. Also has breakouts for Xbee/Bluetooth Bee and SD card module, and includes a 3.3V output.
mega11.jpg
DFRobot Mega Prototyping Shield
General-purpose prototyping shield for the Arduino Mega. Breaks out all I/O pins and provides space for mounting your own parts.
General-purpose prototyping shield for the Arduino Mega. Breaks out all I/O pins and provides space for mounting your own parts.
proto.jpg
DFRobot Proto Screw Shield
Combines the screw shield and prototyping shield.   The screw terminals provide a convenient way to easily connect wires to your project.   The prototyping area provides space for you to add your own parts, plus a LED (D13) and two buttons (rese...
Combines the screw shield and prototyping shield.   The screw terminals provide a convenient way to easily connect wires to your project.   The prototyping area provides space for you to add your own parts, plus a LED (D13) and two buttons (reset and general).
proto-screw-shield.jpg
DFRobot Prototyping Shield
General-purpose prototyping shield.   Features:
General-purpose prototyping shield.   Features:
proto.jpg
DFRobot Screw Shield
Terminal expansion board allows wires to be connected firmly using screw terminals.
Terminal expansion board allows wires to be connected firmly using screw terminals.
screw-shield.jpg
DFRobot Wifi Shield
802.11 b/g WiFi shield. Uses Tx/RX which transfers the UART signal to TCP/IP.   Features:
802.11 b/g WiFi shield. Uses Tx/RX which transfers the UART signal to TCP/IP.   Features:
wifi.jpg
DFRobot Xbee Shield
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream, and is compatible with several Xbee models:
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream, and is compatible with several Xbee models:
xbee.jpg
DroidBuilder SpeakJet TTS
With the SpeakJet Shield, your Arduino projects speak and make sound effects! The SpeakJet Shield is a self-contained voice and complex sound synthesizer. The SpeakJet IC used in this shield has an internal five channel sound synthesizer that can ...
With the SpeakJet Shield, your Arduino projects speak and make sound effects! The SpeakJet Shield is a self-contained voice and complex sound synthesizer. The SpeakJet IC used in this shield has an internal five channel sound synthesizer that can generate on-the-fly, unlimited vocabulary speech synthesis and complex sounds. The SpeakJet IC is preconfigured with 72 speech elements (allophones), 43 sound effects and 12 DTMF Touch Tones.  DroidBuilder
speakjet.jpg
DSS Circuits I2C GPS Shield
Access most of the commonly used GPS data using the I2C protocol. Features a 66 channel 10 Hz GPS receiver with an ultra low -165dBm sensitivity
Access most of the commonly used GPS data using the I2C protocol. Features a 66 channel 10 Hz GPS receiver with an ultra low -165dBm sensitivity
gps.jpg
Dynamic Perception DollyShield
The DollyShield is for DIY motion control for timelapse and videography. Controls a camera dolly.   Provides all elements necessary for a stand-alone user interface, an integrated and isolated camera connection, easy access to the hardware serial...
The DollyShield is for DIY motion control for timelapse and videography. Controls a camera dolly.   Provides all elements necessary for a stand-alone user interface, an integrated and isolated camera connection, easy access to the hardware serial pins through a stereo jack, and an additional stereo jack connecting to pins D2 and D3 to allow for the use of encoders or limit switches. D2 and D3 are chosen for their association with hardware interrupts which increase the reliability of encoder or limit switch actions.
dollyshield.jpg
Emartee L298N Motor Drive Shield
Drive 2 motors with using the L298N H-bridge chip.   Rating:  Max 2A  Max 46V   Can provide power to motors from the Arduino or from an external power source.
Drive 2 motors with using the L298N H-bridge chip.   Rating:  Max 2A  Max 46V   Can provide power to motors from the Arduino or from an external power source.
motor.jpg
Eric Rogers Amani 64 CPLD Shield
The Amani 64 is a low-cost entry-level CPLD development kit, stackable with the Arduino, other Amanis, and Arduino-compatible shields. The Amani 64 can relieve the Arduino of time-intensive processing functions passing the Arduino data as needed. ...
The Amani 64 is a low-cost entry-level CPLD development kit, stackable with the Arduino, other Amanis, and Arduino-compatible shields. The Amani 64 can relieve the Arduino of time-intensive processing functions passing the Arduino data as needed. Data can be transferred via SPI, a parallel data transfers, or an interface of your own invention. Perform both combinatorial and sequential functions faster and with more available I/O while freeing up the Arduino for other tasks. All Amani I/O is configurable to be active I/O or passive pin thus allowing the programmer to use Arduino pins to interface with the Amani, to external devices, or both.
amani64.jpg
EtherMania WeatherShield1
The WeatherShield1 is able to read temperature, pressure and humidity values from the environment. It's equipped with a microcontroller that manages sampling and performs moving average on the last 8 samples. It's connected to the Arduino board th...
The WeatherShield1 is able to read temperature, pressure and humidity values from the environment. It's equipped with a microcontroller that manages sampling and performs moving average on the last 8 samples. It's connected to the Arduino board though a synchronous bidirectional serial protocol similar to what was implemented in the MM5450 LED driver.
weathershield1.jpg
Evil Mad Science Googly Eyes Shield
The shield provides a simple platform with labeled break-out points from every position on the edge connectors with room to fit a little battery pack, a relay, a breadboard, or whatever else you need to mount in your stack. Plus, googly eyes!
The shield provides a simple platform with labeled break-out points from every position on the edge connectors with room to fit a little battery pack, a relay, a breadboard, or whatever else you need to mount in your stack. Plus, googly eyes!
googlyeyes.jpg
Evil Mad Science ISP Shield
The Evil Mad Science ISP shield is an Arduino add-on that lets you use your Arduino as an AVR ISP programmer. This can be used to burn bootloaders onto bare AVR chips, directly within the Arduino programming environment, either in the provided ZIF...
The Evil Mad Science ISP shield is an Arduino add-on that lets you use your Arduino as an AVR ISP programmer. This can be used to burn bootloaders onto bare AVR chips, directly within the Arduino programming environment, either in the provided ZIF socket or on an external target board.
isp.jpg
Excamera Labs Gameduino Shield
For 8-bit game creation. Sprites, scrolling, stereo sound. VGA and stereo connectors.
For 8-bit game creation. Sprites, scrolling, stereo sound. VGA and stereo connectors.
gameduino.jpg
Faz Jaxton CANShield
This shield can be used to interface to existing CAN networks or used to network two or more Arduinos together using phone cable, Cat-5, or any other kind of wire.
This shield can be used to interface to existing CAN networks or used to network two or more Arduinos together using phone cable, Cat-5, or any other kind of wire.
canshield.jpg
FlamingoEDA IDC-6/SPI Shield
Includes a 6 socket-IDC and a SPI socket, and can be used to connect electronic bricks which have IDC6 or SPI interfaces.
Includes a 6 socket-IDC and a SPI socket, and can be used to connect electronic bricks which have IDC6 or SPI interfaces.
idc6spi.jpg
Freetronics 16x2 LCD Shield
16-character by 2-line display with input buttons to allow you to select menu items on the screen.   Works in 4-bit mode with the "LiquidCrystal" library included with the Arduino IDE, allowing you to control the LCD with a total of just 6 digita...
16-character by 2-line display with input buttons to allow you to select menu items on the screen.   Works in 4-bit mode with the "LiquidCrystal" library included with the Arduino IDE, allowing you to control the LCD with a total of just 6 digital I/O lines. Use of pins D4-D9 was selected so that it doesn't interfere with pins required by other popular shields such as the Ethernet Shield, so you can stack this on top of other shields to give you a local display.   The buttons provide "left", "right", "up", "down", and "select" all on one analog input.   Also includes a contrast control and backlight current limiting.   Features:
16x2lcd.jpg
Freetronics 433MHz Receiver Shield
This shield contains a wireless receiver module that operates at 433MHz, a frequency commonly used by consumer electronics including weather stations, home automation remote controls, power consumption meters, car alarms, and also many DIY project...
This shield contains a wireless receiver module that operates at 433MHz, a frequency commonly used by consumer electronics including weather stations, home automation remote controls, power consumption meters, car alarms, and also many DIY projects.   The design is based on the "Weather Station Receiver" project in the book "Practical Arduino".
rx433.jpg
Freetronics Ethernet Shield
The Freetronics Ethernet Shield is based on the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, and is 100% compatible with the Ethernet library and sketches. It also incorporates support for PoE (Power-over-Ethernet) using ei...
The Freetronics Ethernet Shield is based on the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, and is 100% compatible with the Ethernet library and sketches. It also incorporates support for PoE (Power-over-Ethernet) using either official 802.3af (48V) or lower voltage DIY injectors. Spare shield area is available as a prototyping area.
ethernet.jpg
Freetronics ProtoShield Basic
Very simple prototyping shield designed to provide maximum general-purpose prototyping area. Also includes mounting locations for a reset button, a power LED, and two smoothing capacitors.   Supplied as a bare PCB without headers or other parts.
Very simple prototyping shield designed to provide maximum general-purpose prototyping area. Also includes mounting locations for a reset button, a power LED, and two smoothing capacitors.   Supplied as a bare PCB without headers or other parts.
psb.jpg
Freetronics ProtoShield Pro
General-purpose prototyping shield designed to provide maximum prototyping area. Supporting parts are pre-fitted as surface-mount components.   Includes a reset button wired to the Arduino reset line; a general-purpose pushbutton switch with pull...
General-purpose prototyping shield designed to provide maximum prototyping area. Supporting parts are pre-fitted as surface-mount components.   Includes a reset button wired to the Arduino reset line; a general-purpose pushbutton switch with pull-up resistor; blue power LED; general-purpose red and green LEDs with active-high inputs; and two smoothing capacitors.
psp.jpg
Freetronics ProtoShield Short
A simple prototyping shield specifically designed to be short enough to clear the RJ45 jack on an Ethernet shield.
A simple prototyping shield specifically designed to be short enough to clear the RJ45 jack on an Ethernet shield.
protoshield-short.jpg
Freetronics RFID Lock Shield
This shield allows your Arduino to control a door lock using an electric strike plate and one of a number of commonly-available RFID modules, and is based on the circuit described in the "RFID Access Control System" project in the book "Practical ...
This shield allows your Arduino to control a door lock using an electric strike plate and one of a number of commonly-available RFID modules, and is based on the circuit described in the "RFID Access Control System" project in the book "Practical Arduino".   Supported modules include:
rfid-lock.jpg
Freetronics Security Sensor Shield
This shield allows up to 4 security sensors to be connected to an Arduino with full End-Of-Line (EOL) support to detect tampering with the sensors or cable. End-Of-Line technology allows the system to detect a variety of events using a single cabl...
This shield allows up to 4 security sensors to be connected to an Arduino with full End-Of-Line (EOL) support to detect tampering with the sensors or cable. End-Of-Line technology allows the system to detect a variety of events using a single cable pair to the sensor, including:
secsense.jpg
Freetronics Terminal Shield
Breaks out all the Arduino headers to handy screw terminals, making it really easy to connect external wires without using a soldering iron.   The center area of the shield is also a prototyping area, allowing you to add your own parts to suit yo...
Breaks out all the Arduino headers to handy screw terminals, making it really easy to connect external wires without using a soldering iron.   The center area of the shield is also a prototyping area, allowing you to add your own parts to suit your project. A blue "power" LED shows when your Arduino is powered up, and there are also red, green, and blue general-purpose LEDs with current-limiting resistors.   Features:
terminal-shield.jpg
Galileo 7 4 Digits Shield
A combination of input and output devices useful for a variety of projects:
A combination of input and output devices useful for a variety of projects:
4digit.jpg
Galileo 7 Music Shield
Music player for MP3, WMA, AAC, MID, WAV.   LSI: VS1053 (VLSI Solution)  Firmware: ATmega168
Music player for MP3, WMA, AAC, MID, WAV.   LSI: VS1053 (VLSI Solution)  Firmware: ATmega168
music.jpg
Galileo 7 Talk Shield
Japanese speech synthesizer   LSI: Micro Talk ATS001B (Act Brain)
Japanese speech synthesizer   LSI: Micro Talk ATS001B (Act Brain)
talk.jpg
Galileo 7 Wattmeter Shield
AC current sensors.  Sensors: Clamp CT (U_RD) x 2   Option: XBee socket
AC current sensors.  Sensors: Clamp CT (U_RD) x 2   Option: XBee socket
wattmeter.jpg
GfxHax DrinkShield
Open Source breathalyzer kit. Makes it easy to write apps and has a sample game as example code.
Open Source breathalyzer kit. Makes it easy to write apps and has a sample game as example code.
drink.jpg
Gravitech 7-Segment Display Shield
4-digit 7-segment LED display. Features include:
4-digit 7-segment LED display. Features include:
1.jpg
Homeroasters TC4 Shield
Supports multiple thermocouples for roast temperature monitoring and control.
Supports multiple thermocouples for roast temperature monitoring and control.
tc4.jpg
HW Kitchen GSM Playground
GSM Playground is a GSM Shield designed for Arduino based boards (Arduino Duemilanove, Arduino MEGA, Seeeduino Mega...). It is built on a well known and reliable GSM/GPRS Module GE-863 QUAD from Telit. This module is pretty small so it is placed d...
GSM Playground is a GSM Shield designed for Arduino based boards (Arduino Duemilanove, Arduino MEGA, Seeeduino Mega...). It is built on a well known and reliable GSM/GPRS Module GE-863 QUAD from Telit. This module is pretty small so it is placed directly on the shield PCB. The GSM Playground offers GSM capabilities plus other features like recognizing DTMF tones, measuring ambient temperature, and others.
gsmplayground.jpg
ITead Studio Bluetooth Shield
The Bluetooth Shield is a serial port Bluetooth module (slave) breakout board that uses the Arduino UART for Bluetooth communication.
The Bluetooth Shield is a serial port Bluetooth module (slave) breakout board that uses the Arduino UART for Bluetooth communication.
bluetooth.jpg
ITead Studio Colors Shield v1.1
The Colors shield drives an RGB LED matrix using an LED driver chip that incorporates shift registers, data latches, constant current outputs and 64 x 256 gray level PWM for per color. Each channel can provide a maximum current of 60 mA.
The Colors shield drives an RGB LED matrix using an LED driver chip that incorporates shift registers, data latches, constant current outputs and 64 x 256 gray level PWM for per color. Each channel can provide a maximum current of 60 mA.
colorshield.jpg
ITead Studio IBridge 3x3 Keypad Shield
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino and IFLAT-32, you can plug it on Arduino/IFLAT-32 board directly, and you can get the small development platform with keypad input and Graphic LCD dis...
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino and IFLAT-32, you can plug it on Arduino/IFLAT-32 board directly, and you can get the small development platform with keypad input and Graphic LCD display.
Ibridge1.jpg
ITead Studio IBridge 4x4 Keypad Shield
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface.
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface.
ibridge.jpg
ITead Studio ITDB02 LCD Shield v1.3
The ITDB02 LCD module is available in several different versions supported by this shield:
The ITDB02 LCD module is available in several different versions supported by this shield:
itdb.jpg
ITead Studio SD Card Shield
Connects a standard SD card or TF card to Arduino.
Connects a standard SD card or TF card to Arduino.
sdcard.jpg
Jee Labs Plug Shield
The Plug Shield allows using I2C-based JeePlugs with any Arduino or compatible clone. It acts as interface between the hardware I2C port and the plugs. There is a level converter on board, as well as a 3.3V regulator to supply power to the plugs. ...
The Plug Shield allows using I2C-based JeePlugs with any Arduino or compatible clone. It acts as interface between the hardware I2C port and the plugs. There is a level converter on board, as well as a 3.3V regulator to supply power to the plugs. The reset button and ISP signals are duplicated on the shield.
plugshield.jpg
Jimmie Rodgers LoL LED Matrix Shield
The LoL Shield is a charlieplexed LED matrix for the Arduino. The LEDs are individually addressable, so you can use it to display anything in a 9x14 grid. Scroll text, play games, display images, or anything else you want to do.
The LoL Shield is a charlieplexed LED matrix for the Arduino. The LEDs are individually addressable, so you can use it to display anything in a 9x14 grid. Scroll text, play games, display images, or anything else you want to do.
lolshield.jpg
John Liu Phi-1 Shield
16X2 LCD character display with additional features.
16X2 LCD character display with additional features.
phi1.jpg
John Liu Phi-Connect Shield
Phi-connect is a wire/cable management system for Arduino. It passes all Arduino connections to a breadboard with one cable. You can connect your Arduino to a project with just one step.
Phi-connect is a wire/cable management system for Arduino. It passes all Arduino connections to a breadboard with one cable. You can connect your Arduino to a project with just one step.
phi-connect.jpg
Knutsel CC2500 Shield
The CC2500 shield is a Arduino shield that connects a CC2500 to the Arduino and can control a Philips Livingcolors Gen 1 Lamp. The shield provides active level shifting between the 3.3V logic levels of the CC2500 and the 5V logic levels of the Ard...
The CC2500 shield is a Arduino shield that connects a CC2500 to the Arduino and can control a Philips Livingcolors Gen 1 Lamp. The shield provides active level shifting between the 3.3V logic levels of the CC2500 and the 5V logic levels of the Arduino.
cc2500.jpg
Lars Schumann LED 6x5 Shield
30 LEDs arranged in a 6 x 5 matrix so they can be Charlieplexed.
30 LEDs arranged in a 6 x 5 matrix so they can be Charlieplexed.
front.jpg
Lars Schumann LED Cube3 Shield
This shield makes it easy to build a 3D cube using 27 LEDs.
This shield makes it easy to build a 3D cube using 27 LEDs.
front.jpg
Libelium GPRS Dualband Shield
The GPRS Dualband Shield uses the DC3500 DavisComms communication module to allow GPRS communications for Arduino. You can send your data by SMS or do missed calls from your Arduino to mobile devices, or to another Arduino connected to this module.
The GPRS Dualband Shield uses the DC3500 DavisComms communication module to allow GPRS communications for Arduino. You can send your data by SMS or do missed calls from your Arduino to mobile devices, or to another Arduino connected to this module.
gprs.jpg
Libelium GPRS Quadband Shield
The GPRS Dualband Shield uses the HiLo SAGEM communication module to allow GPRS communications for Arduino. You can send your data by SMS or do missed calls from your Arduino to mobile devices, or to another Arduino connected to this module.
The GPRS Dualband Shield uses the HiLo SAGEM communication module to allow GPRS communications for Arduino. You can send your data by SMS or do missed calls from your Arduino to mobile devices, or to another Arduino connected to this module.
gprs-quad.jpg
Libelium GPS Shield
The GPS Shield allows your Arduino to get position and altitude, as well as speed, date and time on UTC (Universal Time Coordinated). Internal GPS antenna is optional. The module is a Vincotech A1080-B that uses the standard NMEA and SIRF III prot...
The GPS Shield allows your Arduino to get position and altitude, as well as speed, date and time on UTC (Universal Time Coordinated). Internal GPS antenna is optional. The module is a Vincotech A1080-B that uses the standard NMEA and SIRF III protocols (www.nmea.org) to transmit the position data via serial port.
gps.jpg
Libelium MicroSD Shield
The MicroSD Shield lets you easily add SD flash memory to Arduino. With this module you can store a large amount of information: 2GB or more is typical.
The MicroSD Shield lets you easily add SD flash memory to Arduino. With this module you can store a large amount of information: 2GB or more is typical.
sd.jpg
Libelium Radiation Sensor Shield
Geiger-Muller tube interface to make an Arduino-based Geiger counter. Includes audible and visual output.
Geiger-Muller tube interface to make an Arduino-based Geiger counter. Includes audible and visual output.
geiger.jpg
Libelium Xbee Shield
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/...
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.   The shield breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).
xbeeShield.jpg
LinkSprite CupperHead WiFi Shield
This is a copy of the AsyncLabs WiShield, which is no longer made.
This is a copy of the AsyncLabs WiShield, which is no longer made.
cupperhead.jpg
LinkSprite Infrared Shield
This shield is used to provide infrared control for Arduino.
This shield is used to provide infrared control for Arduino.
infrared.jpg
LinkSprite Mamba Shield
The Narrowband Powerline Communication Shield can be controlled by an Arduino using SPI. You can build your own powerline communication application using this shield.   The board is designed to work with 110/240V, 50/60Hz.   A 1A wall adaptor is...
The Narrowband Powerline Communication Shield can be controlled by an Arduino using SPI. You can build your own powerline communication application using this shield.   The board is designed to work with 110/240V, 50/60Hz.   A 1A wall adaptor is needed.   Warning: High voltage present if you connect to main power.
mamba-v1.jpg
LinkSprite RS485 Shield
Adds an RS485 port.
Adds an RS485 port.
rs485.jpg
LinkSprite WiFi Shield
The LinkSprite WiFi Shield has built-in TCP/IP stack and all the WiFi related code. The Arduino just configures the WiFi parameters using AT command through the UART, or the user can simply treat the WiFi as a transparent serial port after some of...
The LinkSprite WiFi Shield has built-in TCP/IP stack and all the WiFi related code. The Arduino just configures the WiFi parameters using AT command through the UART, or the user can simply treat the WiFi as a transparent serial port after some offline configuration.
wifi.jpg
Liquidware Button Shield
Shield with 32 buttons on it. It has a mode A or B selector, so you can wire up two of these directly to an Arduino.
Shield with 32 buttons on it. It has a mode A or B selector, so you can wire up two of these directly to an Arduino.
button.jpg
Liquidware Double-Tall Extender Shield
Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields end-to-end. The pin replicators keep everything connected.
Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields end-to-end. The pin replicators keep everything connected.
doubletall.jpg
Liquidware Double-Wide Extender Shield
Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected.
Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected.
doublewide.jpg
Liquidware GeoShield
The GeoShield integrates a GPS module, digital compass, and 3-axis accelerometer all onto the one shield.
The GeoShield integrates a GPS module, digital compass, and 3-axis accelerometer all onto the one shield.
geoshield.jpg
Liquidware Input Shield
The InputShield provides a joy stick, two buttons, and vibration motor.
The InputShield provides a joy stick, two buttons, and vibration motor.
input.jpg
Liquidware Lithium Backpack
Shield-format battery pack and charger circuit that fits either under or over an Arduino.
Shield-format battery pack and charger circuit that fits either under or over an Arduino.
backpack.jpg
Liquidware Mega Lithium Backpack
Shield-format battery pack and charger circuit that fits either under or over an Arduino Mega. Includes prototyping area.
Shield-format battery pack and charger circuit that fits either under or over an Arduino Mega. Includes prototyping area.
mega-backpack.jpg
Liquidware Tank Shield
The TankShield has dual motors which are controlled by the Arduino through serial commands, and can run from a Lithium Backpack.
The TankShield has dual motors which are controlled by the Arduino through serial commands, and can run from a Lithium Backpack.
tank.jpg
Liquidware TouchShield Slide
is a widescreen option that makes full use of the space on the Arduino, maximizing screen space
is a widescreen option that makes full use of the space on the Arduino, maximizing screen space
slide.jpg
Liquidware TouchShield Stealth
is a 128×128 pixel OLED screen on a PCB shield. It is Arduino-ready and brings advanced I/O capabilities to the Arduino platform!
is a 128×128 pixel OLED screen on a PCB shield. It is Arduino-ready and brings advanced I/O capabilities to the Arduino platform!
touch-stealth.jpg
Liquidware Triangle Extenders
Triangular shaped wedges to rotate other shields 45 degrees off the Arduino.
Triangular shaped wedges to rotate other shields 45 degrees off the Arduino.
triangle.jpg
Liquidware Triple-Wide Extender Shield
Plug in an Arduino to the underside and it replicates all of the pins in three locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected.
Plug in an Arduino to the underside and it replicates all of the pins in three locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected.
triple-wide.jpg
Logos Electromechanical 16-Channel High-Current Driver Shield
Sixteen high current driver channels, each capable of sourcing 5A @ 30V. Over-temperature, over-voltage, and over-current protection is included on all channels. Shift register controls allows the shield to use only four pins and the shiftOut() li...
Sixteen high current driver channels, each capable of sourcing 5A @ 30V. Over-temperature, over-voltage, and over-current protection is included on all channels. Shift register controls allows the shield to use only four pins and the shiftOut() library function. An expansion connector allows up to 25 shields to be daisy chained for as many as 400 channels.
srg.jpg
Low Voltage Labs Video Overlay Shield
The Arduino compatible shield board overlays text on analog video, using the Maxim MAX7456 on-screen display chip. This board allows easy overlay of text onto an analog video signal, NTSC or PAL.   Creative Commons Attribution-Noncommercial-Share...
The Arduino compatible shield board overlays text on analog video, using the Maxim MAX7456 on-screen display chip. This board allows easy overlay of text onto an analog video signal, NTSC or PAL.   Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
vos.jpg
Luke Weston Pebble Shield
A multi-purpose shield designed for classroom use and for quick prototyping of a wide variety of projects. Provides a significant prototyping area for custom projects, and a number of optional sub-systems that can be included or excluded as required:
A multi-purpose shield designed for classroom use and for quick prototyping of a wide variety of projects. Provides a significant prototyping area for custom projects, and a number of optional sub-systems that can be included or excluded as required:
pebble.jpg
macetech Centipede Shield
The Centipede Shield uses the Wire I2C interface on analog pins 4 and 5 to provide 64 general purpose I/O pins. Any pin can be configured for input or output. The shield uses four Microchip MCP23017 16-pin digital I/O expander chips.   By default...
The Centipede Shield uses the Wire I2C interface on analog pins 4 and 5 to provide 64 general purpose I/O pins. Any pin can be configured for input or output. The shield uses four Microchip MCP23017 16-pin digital I/O expander chips.   By default, the power for all chips on the Centipede Shield is drawn from the Arduino 5V bus. This is selected by the PWR jumper, shorting the 5V position. If a large number of loads will be powered by the Centipede Shield output pins, such as a large number of LEDs, then it may be necessary to use an external power source to prevent damage to the Arduino 5V regulator or the computer's USB port.
centipede.jpg
macetech ShiftBrite Shield
The ShiftBrite Shield is a convenient way to attach ShiftBrites and power to a standard Arduino controller. It has a screw clamp terminal for power connections, a right angle header for SPI control of ShiftBrites, pass-through female headers (opti...
The ShiftBrite Shield is a convenient way to attach ShiftBrites and power to a standard Arduino controller. It has a screw clamp terminal for power connections, a right angle header for SPI control of ShiftBrites, pass-through female headers (optional), and a large prototyping area for custom circuitry.
shift.jpg
macetech Shifty VU Shield
The Shifty VU Shield accepts stereo audio from a computer, CD player, or other audio source. A ShiftBrite header is provided, allowing the Shifty VU shield to visualize the input audio levels on a chain of RGB LED modules. Using the Arduino IDE, a...
The Shifty VU Shield accepts stereo audio from a computer, CD player, or other audio source. A ShiftBrite header is provided, allowing the Shifty VU shield to visualize the input audio levels on a chain of RGB LED modules. Using the Arduino IDE, any LED visual effect can be synchronized with music or other audio. Stereo audio is filtered and rectified, providing analog values on A2 and A3 that correspond to the average audio volume.
shifty.jpg
Maker Shed MakerShield
Unlike other prototyping shields on the market, the MakerShield allows you to create the circuits the way you want, and easily make as many changes as needed without having to solder. All the major components and pins of the MakerShield are user-a...
Unlike other prototyping shields on the market, the MakerShield allows you to create the circuits the way you want, and easily make as many changes as needed without having to solder. All the major components and pins of the MakerShield are user-assignable. This allows you to simply jump from the appropriate components header pin to any of the pins on the micro-controller. You can make as many changes as you want, and all without any soldering required.
makershield.jpg
Mark Sproul LCD Shield
Standalone serial LCD display. Allows you to have a 2 line or 4 line LCD display without using any extra Arduino pins. It just uses the TXData that normally goes to the USB port, allowing you to use the same serial print functions that you would t...
Standalone serial LCD display. Allows you to have a 2 line or 4 line LCD display without using any extra Arduino pins. It just uses the TXData that normally goes to the USB port, allowing you to use the same serial print functions that you would to the Arduino serial monitor.
lcd.jpg
Max Pierson DMX-512 I/O Shield
Shield with connectors to send and receive DMX512 signals for stage lighting control.
Shield with connectors to send and receive DMX512 signals for stage lighting control.
dmx512.jpg
Mayhew Labs Mux Shield
The Mux (Multiplexer) Shield adds the capacity for up to 48 inputs or outputs on the Arduino and Arduino Mega.   Using three Texas Instruments CD74HC4067 Analog Multiplexers, the Mux Shield makes it possible to have 48 analog/digital inputs or di...
The Mux (Multiplexer) Shield adds the capacity for up to 48 inputs or outputs on the Arduino and Arduino Mega.   Using three Texas Instruments CD74HC4067 Analog Multiplexers, the Mux Shield makes it possible to have 48 analog/digital inputs or digital outputs in many combinations.   The Mux Shield comes with 5V and Ground headers so you'll have power available to each input or output and comes with stackable headers installed.
mux.jpg
MCI Electronics 4-20mA Shield
Shield for sensor with current output 4-20 mA type 2, 3 and 4.   Requires an external 9-12 VDC power supply.   Includes DS1307 Real Time Clock (RTC) with coin cell holder to retain time setting.
Shield for sensor with current output 4-20 mA type 2, 3 and 4.   Requires an external 9-12 VDC power supply.   Includes DS1307 Real Time Clock (RTC) with coin cell holder to retain time setting.
20ma.jpg
MCI Electronics Energy Shield
Arduino Energy Shield is a board which enables you to monitor your house, office or any other installation or equipment energy consumption. Includes headers for an Xbee module for wireless communication. Uses the ADE7753 chip which allows measurem...
Arduino Energy Shield is a board which enables you to monitor your house, office or any other installation or equipment energy consumption. Includes headers for an Xbee module for wireless communication. Uses the ADE7753 chip which allows measurement of active power, reactive power, RMS voltage, and current.
energy.jpg
MCI Electronics GM862 Cellular Modem Shield
Supports either the GM862 or GM862-GPS quad-band cellular modem module. Allows the Arduino to make phone calls, send SMS text messages, and send data via GPRS.
Supports either the GM862 or GM862-GPS quad-band cellular modem module. Allows the Arduino to make phone calls, send SMS text messages, and send data via GPRS.
gsm.jpg
MCI Electronics Relay Shield
Enables the Arduino board to turn on/off devices such as TVs, audio systems, lights and other electrical devices up to 10A/220VAC or 10A/30VDC. Suitable for home/office automation, or controlling other installed equipment.
Enables the Arduino board to turn on/off devices such as TVs, audio systems, lights and other electrical devices up to 10A/220VAC or 10A/30VDC. Suitable for home/office automation, or controlling other installed equipment.
relay.jpg
McLaughlin Engineering Thermocouple Shield
An Arduino shield designed to breakout the MAX6675 thermocouple to digital converter chip. This shield allows for interface to up to 4 K-type Thermocouples.
An Arduino shield designed to breakout the MAX6675 thermocouple to digital converter chip. This shield allows for interface to up to 4 K-type Thermocouples.
thermo.jpg
MightyOhm AVR HV Rescue Shield
The AVR HV Rescue Shield is a high voltage parallel mode fuse programmer for Atmel AVR microcontrollers.   It currently supports the ATmega48/88/168/328P series and the ATtiny2313.
The AVR HV Rescue Shield is a high voltage parallel mode fuse programmer for Atmel AVR microcontrollers.   It currently supports the ATmega48/88/168/328P series and the ATtiny2313.
rescue.jpg
MightyOhm AVR HV Rescue Shield 2
The HV Rescue Shield 2 is a high voltage parallel mode fuse programmer for Atmel AVR microcontrollers.   It currently supports a wide variety of AVR chips, including the 28-pin ATmega48/88/168/328 series, the 20-pin ATtiny2313, and many 8-pin ATt...
The HV Rescue Shield 2 is a high voltage parallel mode fuse programmer for Atmel AVR microcontrollers.   It currently supports a wide variety of AVR chips, including the 28-pin ATmega48/88/168/328 series, the 20-pin ATtiny2313, and many 8-pin ATtiny devices (such as the ATtiny25/45/85 and ATtiny13A). A list of supported devices is in progress.
rescue2.jpg
Mitek U-Blox GSM/GPS/microSD Shield
U-Blox GSM/GPS microSD shield
U-Blox GSM/GPS microSD shield
gsmgps.jpg
Modern Device Fluxamasynth Shield
MIDI synthesizer on a shield: takes standard MIDI codes through a serial protocol. Based on Atmel's ATSAM2195 single-chip MIDI sound system.   The Fluxamasynth has a built-in wavetable with 128 general MIDI sounds and an additional set of 128 var...
MIDI synthesizer on a shield: takes standard MIDI codes through a serial protocol. Based on Atmel's ATSAM2195 single-chip MIDI sound system.   The Fluxamasynth has a built-in wavetable with 128 general MIDI sounds and an additional set of 128 variations and dozens of percussion sounds. It can play music in 64-voice polyphony without effects or 38 voices with effects.   Features:
fluxamasynth.jpg
Multilogica ProtoShieldBR
Simple kit protoshield.
Simple kit protoshield.
protoshieldbr.jpg
Narbotic Instruments MidiVox Shield
MidiVox turns an Arduino board into a programmable MIDI synthesizer.   The shield provides an isolated MIDI input jack along with a single-channel, 12-bit, digital audio output. Any MIDI keyboard with a DIN-5 output can be used to control the shi...
MidiVox turns an Arduino board into a programmable MIDI synthesizer.   The shield provides an isolated MIDI input jack along with a single-channel, 12-bit, digital audio output. Any MIDI keyboard with a DIN-5 output can be used to control the shield. Assignable knobs/faders on your controller will come in handy for modifying synth parameters as you play.   Intended for use as an experimental digital synthesizer, the board can be easily modified for use as a MIDI->CV converter or a MIDI output device.   The kit incorporates an MCP4921 Digital to Analog Converter (DAC) chip, with an 6N138 optocoupler for industry-standard MIDI input.
midivox.jpg
Neuroelec High Power RGB LED Shield
The shield has three independent channels which is ideal for high power RGB LED. It can power up to 10 LEDs (100 - 700mA) per channel. It supports two different dimming methods to control brightness of LEDs. Analog dimming have best energy efficie...
The shield has three independent channels which is ideal for high power RGB LED. It can power up to 10 LEDs (100 - 700mA) per channel. It supports two different dimming methods to control brightness of LEDs. Analog dimming have best energy efficiency while PWM dimming is better for RGB color mixing. Many shields can be stacked with it because it uses only two Arduino pins. The shield can also be operated without an Arduino.   Features:
rgb-led.jpg
Neuroelec High Power RGB LED Shield V2
The shield has three independent channels which is ideal for high power RGB LED. It can power up to 10 LEDs (100 - 700mA) per channel. It supports two different dimming methods to control brightness of LEDs. Analog dimming have best energy efficie...
The shield has three independent channels which is ideal for high power RGB LED. It can power up to 10 LEDs (100 - 700mA) per channel. It supports two different dimming methods to control brightness of LEDs. Analog dimming have best energy efficiency while PWM dimming is better for RGB color mixing. Many shields can be stacked with it because it uses only two Arduino pins. The shield can also be operated without an Arduino.   Features:
rgb-led-v2.jpg
NKC Electronics Ethernet Shield
Based on the WIZ812MJ module by Wiznet, which uses the same W5100 chip as the official Arduino Ethernet shield.
Based on the WIZ812MJ module by Wiznet, which uses the same W5100 chip as the official Arduino Ethernet shield.
ethernet.jpg
NKC Electronics MegaShield
Prototyping shield for the Arduino Mega.
Prototyping shield for the Arduino Mega.
megashield.jpg
NKC Electronics Motor Control Shield
Lets you control motors from your Arduino board. The kit uses the SN754410NE motor driver.
Lets you control motors from your Arduino board. The kit uses the SN754410NE motor driver.
motor.jpg
NKC Electronics RGB LCD Shield
LCD module is a 128x128 pixel 65k color module with a LDS 183 LCD controller.
LCD module is a 128x128 pixel 65k color module with a LDS 183 LCD controller.
lcd.jpg
Nootropic Design Digit Shield
The Digit Shield is a simple Arduino shield that provides a four digit 7-segment display.
The Digit Shield is a simple Arduino shield that provides a four digit 7-segment display.
digitshield.jpg
Nootropic Design EZ-Expander Shield
The EZ-Expander is an Arduino shield that makes it easy and inexpensive to add digital output pins to your Arduino. This is accomplished by utilizing two 74HC595 shift registers. There are 16 new output pins on the shield (numbered 20-35), and the...
The EZ-Expander is an Arduino shield that makes it easy and inexpensive to add digital output pins to your Arduino. This is accomplished by utilizing two 74HC595 shift registers. There are 16 new output pins on the shield (numbered 20-35), and the shield itself uses 3 existing Arduino pins to operate (pins D8, D12, and D13) so overall you get 13 additional output pins to use.   The new digital pins 20-35 can only be used for output, not input. They cannot source or sink as much current as normal Arduino pins. An Arduino pin can source/sink 40mA, but the outputs the EZ-Expander shield can only source/sink 6mA.   All other Arduino pins are brought up to the top of the shield for easy access. Since pins 8 (latch), 12 (clock), and 13 (data) are used by the shield, they are not available for use and are marked with an 'X' on the silkscreen.
ez-expander.jpg
Nootropic Design Video Experimenter Shield
The Video Experimenter shield is an Arduino shield that lets you do all kinds of experiments with video.   Features:
The Video Experimenter shield is an Arduino shield that lets you do all kinds of experiments with video.   Features:
video.jpg
North And Nash Core Memory Shield
32-bit core memory shield that can be used as non-volatile storage for the Arduino, or alternatively, any modern computing device with a USB port can read and write to magnetic core memory.
32-bit core memory shield that can be used as non-volatile storage for the Arduino, or alternatively, any modern computing device with a USB port can read and write to magnetic core memory.
core-memory.jpg
Nu Electronics 2.4" TFT Color LCD Touch Screen Shield
LCD screen with touchscreen interface.
LCD screen with touchscreen interface.
tft.jpg
Nu Electronics 2.8" TFT Color LCD Touch Screen Shield
LCD screen with touchscreen interface. 2.8 inch TFT LCD, 320x240 resolution and 65K color.   Touch-screen Panel and on-board AD7843 compatible controller.   SD card interface in SPI mode, for external mass storage of photos and icons.   Arduino...
LCD screen with touchscreen interface. 2.8 inch TFT LCD, 320x240 resolution and 65K color.   Touch-screen Panel and on-board AD7843 compatible controller.   SD card interface in SPI mode, for external mass storage of photos and icons.   Arduino library and exmaples of graphic and font routines, touchscreen interface and calibration, and SD card (FAT filesystem) operation.
tft2-8.jpg
Nu Electronics Color LCD & Joystick Shield
Color LCD & Joystick shield.
Color LCD & Joystick shield.
colorlcd.jpg
Nu Electronics Datalog & IO Shield v1.0
The Realtime Datalog & IO shield is a platform to interface various sensor and IO modules. It provides real-time clock and SD card interface for mass storage of sensor data.
The Realtime Datalog & IO shield is a platform to interface various sensor and IO modules. It provides real-time clock and SD card interface for mass storage of sensor data.
sensor.jpg
Nu Electronics Ethernet Shield v1.0
Ethernet shield that connects your Arduino to a LAN.
Ethernet shield that connects your Arduino to a LAN.
ethernet.jpg
Nu Electronics LCD Shield
Includes a 16x2 HD44780 compatible LCD, white character & blue backlight.  Use Arudino LCD4Bit library.  Joystick style Keypad with 5 pushbuttons, but only use one ADC pin on Arduino.
Includes a 16x2 HD44780 compatible LCD, white character & blue backlight.  Use Arudino LCD4Bit library.  Joystick style Keypad with 5 pushbuttons, but only use one ADC pin on Arduino.
lcd.jpg
Nu Electronics Nokia 3310 LCD Shield With Joystick
Nokia 3310 LCD is low-cost, monochrome LCD with 84x48 display.
Nokia 3310 LCD is low-cost, monochrome LCD with 84x48 display.
nokia.jpg
Nu Electronics Power Pack Shield
This 5V DC-DC step-up board is a compact, versatile power supply board for many applications. It also provides accurate charging with protection for overcharge, over-discharge, and over-current of the Lithium Polymer (Li-Poly) battery. Measuring a...
This 5V DC-DC step-up board is a compact, versatile power supply board for many applications. It also provides accurate charging with protection for overcharge, over-discharge, and over-current of the Lithium Polymer (Li-Poly) battery. Measuring at 78.7mm x 56.1mm and with on-board 3.7V 1500mAh Li-Poly battery, it can be used in numerous projects, experiments, generating power for models, lights etc.
powerpack.jpg
Nu Electronics ProtoShield
The Protoshield gives the user a small soldering area, one power LED, one general-purpose LED, a general-purpose pushbutton, and reset button.
The Protoshield gives the user a small soldering area, one power LED, one general-purpose LED, a general-purpose pushbutton, and reset button.
protoshield.jpg
Ocean Controls K-Thermocouple Multiplexer Shield
The TCMux Shield combines a MAX6675 and Multiplexer to allow up to 8 K-Type Thermocouples to be connected to an Arduino.
The TCMux Shield combines a MAX6675 and Multiplexer to allow up to 8 K-Type Thermocouples to be connected to an Arduino.
tcmux.jpg
Open Electronics GSM Shield
Simple GSM / GPRS shield.   Features:
Simple GSM / GPRS shield.   Features:
gsm.jpg
Photoduino Photoduino
Photoduino is an open source camera controller based on the Arduino platform. Its main purpose is to serve as technical support for taking photographs of various techniques such as: Timelapses, High Speed Photography, Photography of insects and an...
Photoduino is an open source camera controller based on the Arduino platform. Its main purpose is to serve as technical support for taking photographs of various techniques such as: Timelapses, High Speed Photography, Photography of insects and animals, storms Photography or HDR Photography among others.
photo.jpg
Practical Maker BNC Sensor Shield
A shield that will allow you to connect any sensor that has a BNC connector.
A shield that will allow you to connect any sensor that has a BNC connector.
bncsensor.jpg
Practical Maker Breakout Board Shield
I2C / SPI / OneWire breakout.
I2C / SPI / OneWire breakout.
breakout.jpg
Practical Maker Port Expander Shield
The Port Expander Shield allows you to add more digital outputs via an I2C interface.
The Port Expander Shield allows you to add more digital outputs via an I2C interface.
expander.jpg
Practical Maker PWM Shield
The PWM Shield for the Arduino allows you to add 32 PWM outputs to your Arduino. They are daisy-chainable (easy to do with a jumper wire) so you can add up to 640 outputs (or until the Arduino can't provide enough power).
The PWM Shield for the Arduino allows you to add 32 PWM outputs to your Arduino. They are daisy-chainable (easy to do with a jumper wire) so you can add up to 640 outputs (or until the Arduino can't provide enough power).
pwm.jpg
Practical Maker RTC / EEPROM Shield
Includes 1 DS1307 RTC and 2 x 32k EEPROM chips.
Includes 1 DS1307 RTC and 2 x 32k EEPROM chips.
rtc-eeprom.jpg
Protuino MES-1 V1.6
First MES (Minimal Experimental Shield) member of a series of 4 shields. This is the beginners shield for data visualization. Using a single 8 digit display and LEDs.
First MES (Minimal Experimental Shield) member of a series of 4 shields. This is the beginners shield for data visualization. Using a single 8 digit display and LEDs.
mes1.jpg
Protuino MES-1 V2.0
Second MES (Minimal Experimental Shield) member of a series of 4 shields. This is the data visualization shield. Using a four digit display, LEDs and Buzz. This shield can visualize data in Integer or decimal point.
Second MES (Minimal Experimental Shield) member of a series of 4 shields. This is the data visualization shield. Using a four digit display, LEDs and Buzz. This shield can visualize data in Integer or decimal point.
mes1.jpg
Renbotics Servo Shield
Uses two 4017 decade counters to drive up to 16 servos using only 4 pins (digital pins 6 to 9) and as little as one 8-bit timer (Timer 2) in standard mode or two 16/8-bit timers (Timer 1 and Timer 2 for Duemilanove or Timer 3 for Mega) in high acc...
Uses two 4017 decade counters to drive up to 16 servos using only 4 pins (digital pins 6 to 9) and as little as one 8-bit timer (Timer 2) in standard mode or two 16/8-bit timers (Timer 1 and Timer 2 for Duemilanove or Timer 3 for Mega) in high accuracy mode. It also includes a 196 point breadboard style prototyping area.
servo.jpg
Renbotics Side Shield
The Side Shield makes it easy to extend your Arduino shield stacking sideways, remap conflicting pins between shields, and simplify using 3.3V shields with 5V Arduinos or compatible.
The Side Shield makes it easy to extend your Arduino shield stacking sideways, remap conflicting pins between shields, and simplify using 3.3V shields with 5V Arduinos or compatible.
sideshield.jpg
RepRap Research Foundation Breakout Shield v1.4
The Arduino Breakout Shield provides all the Arduino pins as screw terminals. It is perfect for semi-permanent Arduino projects, or just general prototyping. It also provides extra GND, 3.3V, 5V, and Supply voltage pins for convenience.   Version...
The Arduino Breakout Shield provides all the Arduino pins as screw terminals. It is perfect for semi-permanent Arduino projects, or just general prototyping. It also provides extra GND, 3.3V, 5V, and Supply voltage pins for convenience.   Version 1.4 fixes a potential short problem, and adds additional female headers to allow shield stacking.
breakout.jpg
Ro-Bot-X Designs Robot Builder's Shield
The Robot Builder's Shield makes building robots with Arduino easy. Directly plug up to 6 sensors and up to 6 servos in to dedicated connectors and drive 2 DC motors from the built in H-bridge, 1A/motor. Flip the power switch On and use the J1 jum...
The Robot Builder's Shield makes building robots with Arduino easy. Directly plug up to 6 sensors and up to 6 servos in to dedicated connectors and drive 2 DC motors from the built in H-bridge, 1A/motor. Flip the power switch On and use the J1 jumper to transfer power from the battery to Arduino's Vin pin.
rbs.jpg
Robot Power MegaMoto Shield
The MegaMoto is a dual half-bridge circuit that can be configured either has a full H-bridge or as two independent half-bridge circuits. This allows a single MegaMoto to drive one motor with full variable-speed control both forward and reverse. It...
The MegaMoto is a dual half-bridge circuit that can be configured either has a full H-bridge or as two independent half-bridge circuits. This allows a single MegaMoto to drive one motor with full variable-speed control both forward and reverse. It also allows two independent motors to be controlled in a uni-directional fashion by connecting one side of each motor to the battery negative and the other motor lead to one of the MegaMoto outputs.   Each half-bridge on the MegaMoto is independently controlled so stacking two or three MegaMoto units allows an Arduino to drive three-phase brushless or stepper motors as well as DC brushed motors. Not limited to motors, the MegaMoto can control other DC loads such as lights, solenoids, relays, valves, Peltier junction coolers, Hydrogen generators or basically any DC device within the operating voltage and current range.   Rated at up to 30A at up to 28V.
megamoto.jpg
RobotPirate ArduiNIX Shield
The ArduiNIX shield is a user programmable platform for driving multiplexed Nixie tube or other high voltage displays.   CC 2.5 Attrib-Share Alike
The ArduiNIX shield is a user programmable platform for driving multiplexed Nixie tube or other high voltage displays.   CC 2.5 Attrib-Share Alike
nixi.jpg
Rogue Robotics rMP3 Shield
The rMP3 module allows designers to integrate high quality MP3 playback into designs with an easy to use TTL serial protocol.   Sound files such as voice prompts, sound effects, and music can be played using the rMP3. MP3 playback can be CBR (Con...
The rMP3 module allows designers to integrate high quality MP3 playback into designs with an easy to use TTL serial protocol.   Sound files such as voice prompts, sound effects, and music can be played using the rMP3. MP3 playback can be CBR (Constant Bit Rate), or VBR (Variable Bit Rate) up to 48 KHz at 320 Kbps. MP3 files are stored on SDHC, SD or MMC cards, in a format readable by your PC. PCM (WAV) files and IMA ADPCM files can also be played.   In addition to playing audio files, you can use the rMP3 for your data access applications as well. The rMP3 can create files and store data to SD or SDHC cards which can be removed, and read with any standard MMC/SD card reader on a PC. The rMP3 will read SD or SDHC cards in either FAT12, FAT16 or FAT32 formats in any size commercially available (8MB to 32GB).   Each module has a 1/8" stereo headphone jack for headsets (16 Ohms+) or for line-in connections. The rMP3 also has a multi-function 10-pin connector that allows direct operation of the module using simple logic triggers.
rmp3.jpg
Rugged Circuits Aussie Shield
The Aussie Shield is the shield that sits "down under"?. It is compatible with the Arduino Uno, Duemilanove, and Mega boards (and other compatible boards). The shield extends the connection pins out to 28 quick-connect terminals that accept 20AWG ...
The Aussie Shield is the shield that sits "down under"?. It is compatible with the Arduino Uno, Duemilanove, and Mega boards (and other compatible boards). The shield extends the connection pins out to 28 quick-connect terminals that accept 20AWG to 24AWG wire. Unlike screw terminals, these quick-connect terminals require no tools: just push, insert wire, and release. Use the Aussie Shield for easy breadboarding, swapping Arduinos in fixed lab or art installations, using stacking shields standalone without an Arduino, or cross-wiring shield pins.
aussie.jpg
Rugged Circuits Beat707 Shield
32 step machine, (plus 32 double-steps for a total of 64 steps) with 16 step buttons and LEDs, LCD screen and navigation keys. It\'s like the classic Roland TR707 but with some twists, as it actually has 64 x 1/32 or 32 x 1/64 steps. The 2 note-st...
32 step machine, (plus 32 double-steps for a total of 64 steps) with 16 step buttons and LEDs, LCD screen and navigation keys. It\'s like the classic Roland TR707 but with some twists, as it actually has 64 x 1/32 or 32 x 1/64 steps. The 2 note-step sequence feature allows you to do bass and/or synth grooves. The unit doesn\'t produce any sound, it\'s all MIDI based, so you can use any MIDI compatible device.
beat707.jpg
Rugged Circuits Gadget Shield
single shield that has an accelerometer, speaker, microphone, infrared transmitter, infrared receiver, RGB LED, four discrete LED’s, two pushbuttons, a potentiometer, and a visible light sensor?
The Gadget Shield is an add-on (shield) compatibl...
single shield that has an accelerometer, speaker, microphone, infrared transmitter, infrared receiver, RGB LED, four discrete LED’s, two pushbuttons, a potentiometer, and a visible light sensor?
The Gadget Shield is an add-on (shield) compatible with the Arduino Uno, Duemilanove, Mega/Mega2560, Ruggeduino, or other compatible boards. It extends the functionality of the microcontroller board by adding
gadget.jpg
Rugged Circuits Motor Driver Shield
The Rugged Motor Driver is a dual H-bridge 30V motor driver using the Texas Instruments 2.8A DRV8801 devices. It can control one bipolar stepper motor or two brush DC motors.   Protection features include reverse voltage, overcurrent, overtempera...
The Rugged Motor Driver is a dual H-bridge 30V motor driver using the Texas Instruments 2.8A DRV8801 devices. It can control one bipolar stepper motor or two brush DC motors.   Protection features include reverse voltage, overcurrent, overtemperature, electrostatic discharge, and shorted motor leads.   Stacking pin headers allow another shield to stack on top or bare wires inserted to make use of unused I/O pins.
motor.jpg
Rugged Circuits Quick Shield
The Quick Shield extends the connection pins out to 28 quick-connect terminals that accept 20AWG to 24AWG wire. Unlike screw terminals, these quick-connect terminals require no tools: just push, insert wire, and release. Stacking headers allow ano...
The Quick Shield extends the connection pins out to 28 quick-connect terminals that accept 20AWG to 24AWG wire. Unlike screw terminals, these quick-connect terminals require no tools: just push, insert wire, and release. Stacking headers allow another shield to plug in on top and have access to all 28 pins. Use the Quick Shield for easy breadboarding, using shields standalone without an Arduino, or cross-wiring shield pins.
quick.jpg
Samurai Circuits Cool Neon Shield
10 channel electroluminescent wire (EL wire) controller. Works in combination with an external CoolNeon driver. The Triacs used are rated for 600 volts at up to 1 amp, so should work with the biggest drivers. Also includes opto-isolation for compl...
10 channel electroluminescent wire (EL wire) controller. Works in combination with an external CoolNeon driver. The Triacs used are rated for 600 volts at up to 1 amp, so should work with the biggest drivers. Also includes opto-isolation for complete isolation between the Arduino and the AC power lines.
neon.jpg
Samurai Circuits Mama Shield
The Mama Shield was designed for high-speed prototyping, and has 5 slots for inserting daughter-boards. Each slot has a 36 pins. The slots contains all of the Arduino pins plus 8 shared bus pins. The bus pins allow cards to communicate between eac...
The Mama Shield was designed for high-speed prototyping, and has 5 slots for inserting daughter-boards. Each slot has a 36 pins. The slots contains all of the Arduino pins plus 8 shared bus pins. The bus pins allow cards to communicate between each other.   The shield also has a switchboard so you can easily reconfigure the pin mapping. The switchboard can be used much like an old-style switchboard was used by a telephone operator to connect a call. There are also a row of jumper pins with the jumpers in case you want to keep everything the same.
mamashield.jpg
Samurai Circuits POV Shield
The POV Shield is modular system for displaying persistence of vision (POV) or simply to show some cool LED patterns. It uses three TLC5940.   Each can control 16 LEDs using pulse width modulation (PWM) with a grayscale resolution of 4095. Howeve...
The POV Shield is modular system for displaying persistence of vision (POV) or simply to show some cool LED patterns. It uses three TLC5940.   Each can control 16 LEDs using pulse width modulation (PWM) with a grayscale resolution of 4095. However there are three of them so it has red green and blue (RGB).
pov.jpg
Scattered Mind Lightuino Shield
Multiple LED driver.   Can be used either as a shield to an existing Arduino, or stand-alone by the addition of an ATmega328 MCU.
Multiple LED driver.   Can be used either as a shield to an existing Arduino, or stand-alone by the addition of an ATmega328 MCU.
lightuino.jpg
Schmelle2 BaroTemp Shield
Shield contains the Maxim DS1307 Clock and the air pressure and temperature sensor BMP085 manufactured by Bosch Sensortec.
Shield contains the Maxim DS1307 Clock and the air pressure and temperature sensor BMP085 manufactured by Bosch Sensortec.
baro.jpg
Schmelle2 BaroTemp Shield v2
Shield with BMP085 air-pressure/temperature sensor, DS1307 RTC and new in v2 additional 2*64KB EEPROM.
Shield with BMP085 air-pressure/temperature sensor, DS1307 RTC and new in v2 additional 2*64KB EEPROM.
baro-v2.jpg
Schmelle2 DOGM128 Shield
Shield for the DOG-M 128x64 display series manufactured by Electronic Assembly.
Shield for the DOG-M 128x64 display series manufactured by Electronic Assembly.
dogm128.jpg
Schmelle2 DOGM128-Shield v4
Updated shield for the DOG-M 128x64 display series manufactured by Electronic Assembly.   New features:
Updated shield for the DOG-M 128x64 display series manufactured by Electronic Assembly.   New features:
dogm128.jpg
Schmelle2 DOGM132 Shield
Shield for the DOG-M 132x32 series display manufactured by Electronic Assembly.
Shield for the DOG-M 132x32 series display manufactured by Electronic Assembly.
dogm132.jpg
Schmelle2 Power Shield
Shield contains 4 Power HEXFET MOSFET Transistors IRLIZ44N used by 4 PWM channels of Arduino.
Shield contains 4 Power HEXFET MOSFET Transistors IRLIZ44N used by 4 PWM channels of Arduino.
power.jpg
Seeed Studio Bees Shield
Holds 2 xBee or compatible modules, has a 3.3V regulator, small prototyping area and reset buttons for both the Arduino and one for each xBee footprint.   Switch to change the connection of the xBee socket to the serial pins to "cross over" to al...
Holds 2 xBee or compatible modules, has a 3.3V regulator, small prototyping area and reset buttons for both the Arduino and one for each xBee footprint.   Switch to change the connection of the xBee socket to the serial pins to "cross over" to allow the xBee to be programmed via the FTDI from the host computer. Activity LEDs for both xBee sockets.
bees.jpg
Seeed Studio Danger Shield
The Danger Shield contains a variety of fun and useful electronic circuits that you can use to do fun and useful things with Arduino. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No ex...
The Danger Shield contains a variety of fun and useful electronic circuits that you can use to do fun and useful things with Arduino. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components.   Some of the features of the board are: 3 x linear sliders w/ integrated LEDs (each independently hooked up to PWM) 3 x pushbuttons 2 x indicator LEDs (each with a PWM) 1 x piezo buzzer (for making noise!) 1 x temperature sensor  1 x light sensor 1 x knock sensor 1 x 7 segment LED (with shift register) Power LED and reset button See also wiki.nycresistor.com/wiki/Danger_Shield_1.0
danger.jpg
Seeed Studio Electronic Brick Chassis v1.1
The Electronic Brick Chassis Shield allows easy connection of Seeed Studio "Electronic Brick" devices.
The Electronic Brick Chassis Shield allows easy connection of Seeed Studio "Electronic Brick" devices.
chassis.jpg
Seeed Studio Electronic Brick Shield
By using electronic bricks, you may connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, ser...
By using electronic bricks, you may connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos, and buttons. Each terminal module has buckled port with VCC, GND and Output, which has corresponding port on the sensing board, with a plain 2.54mm dual-female cable you may start playing already.
brick.jpg
Seeed Studio GPRS Shield
The GPRS (General Packet Radio Service) Shield provides GSM/GPRS 850/900/1800/1900MHz communications for voice, SMS, data, and fax. It is controlled via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The GPRS Shield has 12 GPIOs 2...
The GPRS (General Packet Radio Service) Shield provides GSM/GPRS 850/900/1800/1900MHz communications for voice, SMS, data, and fax. It is controlled via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The GPRS Shield has 12 GPIOs 2 PWMs and 1 ADC(They are all 2V8 logic).   Features:
gprs.jpg
Seeed Studio Music Shield
iPod/iPhone dock compatible shield based on the VS1053b. Can play variety of music formats and even record sounds. Has the very same 30 pins connector as the iPod, making it possible to use the shield on any ipod compatible dock. You can output mu...
iPod/iPhone dock compatible shield based on the VS1053b. Can play variety of music formats and even record sounds. Has the very same 30 pins connector as the iPod, making it possible to use the shield on any ipod compatible dock. You can output music to a external speaker, use the Play/pause, next song/previous song button on the dock or remote controller.
music.jpg
Seeed Studio ProtoShield Remixed v1.0
This is an Arduino prototyping kit from Seeed Studio! This Arduino kit compensates the disadvantage of either Arduino or Seeeduino, adding more solder-bility to big foot components, convenient power planes and many other features

Read more: htt...
This is an Arduino prototyping kit from Seeed Studio! This Arduino kit compensates the disadvantage of either Arduino or Seeeduino, adding more solder-bility to big foot components, convenient power planes and many other features

Read more: http://www.hwkitchen.com/products/arduino-protoshield-kit-remixed-v1-0/
proto-remix.jpg
Seeed Studio Relay Shield
Relay Shield provides an easy ways for smart appliance control. It covers control to normal load circuits with 4 photo-coupled solid state relay capable of switching DC90W (or AC360VA). It also provides stand alone power supply, ZigBee-type wirele...
Relay Shield provides an easy ways for smart appliance control. It covers control to normal load circuits with 4 photo-coupled solid state relay capable of switching DC90W (or AC360VA). It also provides stand alone power supply, ZigBee-type wireless module socket, and native Arduino compatibility. It can control devices such as solenoid valves, lamps, motors and other high current or high voltage devices.   (v1.2b)
relay.jpg
Seeed Studio SD Card Shield
The SD Card Shield is a breakout board for a standard SD card.   This is the 3rd version of Seeed Studio SD card shield: compared to previous versions it has the TF card adapter removed to avoid data error when SD and TF card were both inserted, ...
The SD Card Shield is a breakout board for a standard SD card.   This is the 3rd version of Seeed Studio SD card shield: compared to previous versions it has the TF card adapter removed to avoid data error when SD and TF card were both inserted, and an additional filter capacitor was added to reduce power supply ripple. You can select 3.3V or IO port power supply with the switch on board in order to work with different library.   Note: SDHC is not supported.
sd211.jpg
Seeed Studio Solar Charger Shield
The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and acts as an energy harvester for in-field charging. You may use various batteries to shift up for 5V output, or put on Li-ion battery and so...
The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and acts as an energy harvester for in-field charging. You may use various batteries to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit.
solar.jpg
Seeed Studio Stalker
Wireless sensor network node with data logging.
Wireless sensor network node with data logging.
stalker.jpg
Seeed Studio Stem Base Shield
Stem is the new version of Electronic Brick Shield. All connections have been standardized onto 4 pins( Signal 1, Signal 2, VCC, and GND) 2mm connectors, which simplify the wiring of electronics projects.
Stem is the new version of Electronic Brick Shield. All connections have been standardized onto 4 pins( Signal 1, Signal 2, VCC, and GND) 2mm connectors, which simplify the wiring of electronics projects.
stem-base.jpg
Seeed Studio Wiznet Ethernet Shield
Ethernet shield based on the Wiznet W5100 ethernet chip. Compatible with official Arduino Ethernet library and with added support for the Arduino Mega.
Ethernet shield based on the Wiznet W5100 ethernet chip. Compatible with official Arduino Ethernet library and with added support for the Arduino Mega.
wiznet.jpg
Seeed Studio XBee Shield v1.1
The XBee shield allows an Arduino to communicate wirelessly using Zigbee. It is based on the XBee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb re...
The XBee shield allows an Arduino to communicate wirelessly using Zigbee. It is based on the XBee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.
xbee.jpg
Shieldstudio 4-Digit Shield
A 4-digit LED matrix display with built-in ASCII 104-character font and 24 user-definable characters.
A 4-digit LED matrix display with built-in ASCII 104-character font and 24 user-definable characters.
4digit.jpg
Shieldstudio QuadMotor Shield
Controls DC motors.
Controls DC motors.
quadmotor.jpg
SK Pang Electronics CAN-Bus Shield
Arduino CAN-Bus Shield with uSD Card Holder and GPS input.
Arduino CAN-Bus Shield with uSD Card Holder and GPS input.
canbus4.jpg
SK Pang Electronics DMX Shield
Arduino DMX Shield with uSD Card Holder.
Arduino DMX Shield with uSD Card Holder.
dmx_shield.jpg
SK Pang Electronics EasyRadio Shield
Gives your Arduino simple wireless commumication. The embedded easy-Radio firmware handles all encode/decode functions and over air transmission of data.   Features:
Gives your Arduino simple wireless commumication. The embedded easy-Radio firmware handles all encode/decode functions and over air transmission of data.   Features:
easyradio.jpg
Small Room Labs QuarterK
256 LEDs in a 16x16 matrix, along with connectors for a speaker and a game controller.
256 LEDs in a 16x16 matrix, along with connectors for a speaker and a game controller.
quarterk.jpg
Smart Energy Groups SEGMeter
Provides 6 inputs for Hall-effect current-clamps to measure domestic and industrial power consumption. Energy usage data can be stored by the Arduino, accessed in real time, or reported to another system via wireless or wired connections.   This ...
Provides 6 inputs for Hall-effect current-clamps to measure domestic and industrial power consumption. Energy usage data can be stored by the Arduino, accessed in real time, or reported to another system via wireless or wired connections.   This shield also provides mounting headers for an XBee wireless module, allowing it to be part of a wireless mesh network of sensor / control nodes. It also includes a reed relay output that can be used to trigger a larger external relay or drive another system directly for control purposes.
seg.jpg
Snootlab I2C Power Protoshield
Designed for easy prototyping.   Features:
Designed for easy prototyping.   Features:
i2c-power.jpg
Snootlab Memoire Shield
SD logging shield with RTC and a prototyping area.
SD logging shield with RTC and a prototyping area.
memoire.jpg
Snootlab Power ScrewShield
A prototyping screw shield for Arduino with 12V on board through ATX Power supply connector and an SMD solder zone.
A prototyping screw shield for Arduino with 12V on board through ATX Power supply connector and an SMD solder zone.
power-screwshield.jpg
Solarbotics SB Protoshield
The Solarbotics SB-ProtoShield kit mates with the USB Arduino and Freeduino SB boards, and sets you up with:
The Solarbotics SB-ProtoShield kit mates with the USB Arduino and Freeduino SB boards, and sets you up with:
protoshield.jpg
Solarbotics SB-GVS Sensor Shield
The SB-GVS shield lets you easily interface this sort of device to your Arduino's 12 digital and 6 analog I/O ports. It also features an optional I2C port for peripheral networking at the sacrifice of 2 analog I/O ports, which share the same pins.
The SB-GVS shield lets you easily interface this sort of device to your Arduino's 12 digital and 6 analog I/O ports. It also features an optional I2C port for peripheral networking at the sacrifice of 2 analog I/O ports, which share the same pins.
gvs.jpg
SonikTech SENPAI Shield
AVR Multiprogrammer. Allows you to burn ATMega and ATTiny chips using your Arduino.
AVR Multiprogrammer. Allows you to burn ATMega and ATTiny chips using your Arduino.
senpai.jpg
Sparkfun Ardumoto Shield
The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.   This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, t...
The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.   This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.
ardumoto.jpg
Sparkfun CAN-Bus Shield
This shield gives the Arduino CAN-Bus capability for communication with vehicle engine management systems. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBDII c...
This shield gives the Arduino CAN-Bus capability for communication with vehicle engine management systems. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module.
obd.jpg
Sparkfun Color LCD Shield
Includes the Nokia 6100 128x128 mini color LCD and a backlight driver circuit that boosts to 7V, and three momentary push-buttons tied through jumpers to pins D3, D4, and D5.
Includes the Nokia 6100 128x128 mini color LCD and a backlight driver circuit that boosts to 7V, and three momentary push-buttons tied through jumpers to pins D3, D4, and D5.
lcd.jpg
Sparkfun Danger Shield
Provides a variety of useful inputs and outputs for various projects.
Provides a variety of useful inputs and outputs for various projects.
danger.jpg
Sparkfun EL Escudo
The EL Escudo is an Arduino shield that drives EL wire. Electroluminescent wire is a flexible cord that emits a florescent light. Some times referred to as 'cool neon' because the cord does not heat up. The problem is that EL wire runs on high vol...
The EL Escudo is an Arduino shield that drives EL wire. Electroluminescent wire is a flexible cord that emits a florescent light. Some times referred to as 'cool neon' because the cord does not heat up. The problem is that EL wire runs on high voltage AC: about 125V at 425Hz. While EL wire requires very little power, you can't use normal transistors to turn on/off a string of it. The EL Escudo uses TRIACs to control up to 8 channels.
el.jpg
Sparkfun GPS Shield
With the GPS Shield you can add GPS functionality to your Arduino. A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not soldered on o...
With the GPS Shield you can add GPS functionality to your Arduino. A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not soldered on or included and can be found below in the related items). The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small protoyping area is also provided.
gps.jpg
Sparkfun Joystick Shield
The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
joystick.jpg
Sparkfun MegaShield
Prototyping shield for the Arduino Mega. Provides a prototyping area, two general-purpose LEDs, and reset button. The shield also works with small breadboards if you don't want to solder to the prototyping area.
Prototyping shield for the Arduino Mega. Provides a prototyping area, two general-purpose LEDs, and reset button. The shield also works with small breadboards if you don't want to solder to the prototyping area.
megashield.jpg
Sparkfun microSD Shield
The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects.
The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects.
sd.jpg
Sparkfun MIDI Breakout Shield
The MIDI Breakout board gives your Arduino access to the powerful MIDI communication protocol. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your microcontroller to send an...
The MIDI Breakout board gives your Arduino access to the powerful MIDI communication protocol. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your microcontroller to send and receive MIDI event messages.   The MIDI Breakout provides both MIDI-IN and MIDI-OUT connections, as well as a MIDI-THRU port. The MIDI-IN port is opto-isolated to prevent ground loops. The MIDI Breakout board can be mounted directly on top of an Arduino as a shield, connecting the MIDI-IN/THRU to the Arduino's hardware RX pin and the MIDI-OUT to TX. All of the Arduino's digital and analog pins, as well as power and ground busses, are broken out as well. The RUN/PGM switch allows you to program the Arduino over serial without having to remove the shield.
midi-breakout.jpg
Sparkfun MIDI Shield
The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial inter...
The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI's event messages.
midishield.jpg
Sparkfun ModKit MotoProto Shield
The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.
The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.
motoproto.jpg
Sparkfun Motor Shield
This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same VIN line as the Arduino board, includes blue and yellow LEDs t...
This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same VIN line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.   Control for motor attached to OUT1/2 is connected to digital line 12 (direction A) and digital line 3 (PWM A). Control for motor attached to OUT3/4 is connected to digital line 13 (direction B) and digital line 11 (PWM B).
motor.jpg
Sparkfun MP3 Shield
The MP3 Shield wires your Arduino up to a VS1053D MP3 audio decoder IC, providing it with the ability to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorb...
The MP3 Shield wires your Arduino up to a VS1053D MP3 audio decoder IC, providing it with the ability to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.   The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.
mp3.jpg
Sparkfun Musical Instrument Shield
Provides access to the VS1053 MP3/MIDI decoder hardwired in realtime MIDI mode. The VS1053 provides 31 note polyphony in 128 GM1 standard instruments along with 50 percussion instruments.
Provides access to the VS1053 MP3/MIDI decoder hardwired in realtime MIDI mode. The VS1053 provides 31 note polyphony in 128 GM1 standard instruments along with 50 percussion instruments.
music.jpg
Sparkfun PowerDriver Shield
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.   The board provides 6 PWM outp...
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.   The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET for full specifications on how much current this board can handle.
powerdriver.jpg
Sparkfun Proto Shield
The ProtoShield provides a small soldering area, two general-purpose LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and a reset switch.
The ProtoShield provides a small soldering area, two general-purpose LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and a reset switch.
protoshield.jpg
Sparkfun RFID Evaluation Shield - 13.56MHz
Evaluation platform for the SM130 RFID module. Includes an XBee header, a PCB trace antenna, and a small prototyping area. This board can also be used as an antenna to the SM130 RFID module.
Evaluation platform for the SM130 RFID module. Includes an XBee header, a PCB trace antenna, and a small prototyping area. This board can also be used as an antenna to the SM130 RFID module.
rfid-eval.jpg
Sparkfun ScrewShield v1.5
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by a regular prototyping shield, including:
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by a regular prototyping shield, including:
terminal.jpg
Sparkfun SI4735 AM FM Receiver Shield
Complete tuner from antenna input to audio output. Includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (RDS) and ...
Complete tuner from antenna input to audio output. Includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (RDS) and the North American Radio Broadcast Data System (RBDS), including all required symbol decoding, block synchronization, error detection, and error correction functions.
am-fm.jpg
Sparkfun SM5100B Cellular Shield
The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cel...
The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) and an antenna and you can start sending Serial.print statements to make calls, send texts and serve web pages.   Two jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1" spaced header with connections for microphone inputs and speaker outputs.
cellular.jpg
Sparkfun USB Host Shield
The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB slave devi...
The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB slave device including thumbdrives, digital cameras, and bluetooth dongles.
usbhost.jpg
Sparkfun VoiceBox Shield
The VoiceBox Shield uses SpeakJet voice and sound synthesizer chip to convert serial commands into a robot-sounding voice.   Includes a two stage audio amplifier with a volume control.   You can control the SpeakJet through either its serial lin...
The VoiceBox Shield uses SpeakJet voice and sound synthesizer chip to convert serial commands into a robot-sounding voice.   Includes a two stage audio amplifier with a volume control.   You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet's serial input.
speech.jpg
Sparkfun WiFly Shield
The WiFly Shield gives your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network's RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to al...
The WiFly Shield gives your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network's RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino's UART.
wifly.jpg
Sparkfun XBee Wireless Shield
The XBee Shield simplifies the task of interfacing an XBee with your Arduino. Works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun's own design and is a distant relative to the official XBee...
The XBee Shield simplifies the task of interfacing an XBee with your Arduino. Works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun's own design and is a distant relative to the official XBee Shield from Arduino.   Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.   Includes a reset button, prototyping area, and LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee.
xbee.jpg
SpikenzieLabs Button 64 Shield
The B64 is an Arduino Shield that allows you to connect up to 64 buttons to your Arduino. You can use the B64 to make custom musical instruments, attach a lot of inputs, cool computer interfaces, etc.   The B64 has two eight-pin connectors that m...
The B64 is an Arduino Shield that allows you to connect up to 64 buttons to your Arduino. You can use the B64 to make custom musical instruments, attach a lot of inputs, cool computer interfaces, etc.   The B64 has two eight-pin connectors that make an eight row by eight column matrix for the total of 64 buttons. You do not have to format the button layout in a physical matrix nor do you have to use all of the 64 buttons. Unused buttons are simply ignored.
b64.jpg
SpikenzieLabs Drum Kit-Kit
The Drum Kit - Kit lets you turn your Arduino into a drum kit.
The Drum Kit - Kit lets you turn your Arduino into a drum kit.
dkk.jpg
SpikenzieLabs Shield Dock
The Shield Dock is a versatile prototyping shield that can be used in several different ways:   1. With a traditionally shaped Arduino, as a prototyping shield.  2. As a pin break-out for your other shields to a breadboard, or built into a perma...
The Shield Dock is a versatile prototyping shield that can be used in several different ways:   1. With a traditionally shaped Arduino, as a prototyping shield.  2. As a pin break-out for your other shields to a breadboard, or built into a permanent project.  3. Docked with a Sippino to give it compatibility with regular shields.   Features:
shield-dock.jpg
SpikenzieLabs VoiceShield Slim
The Voice Shield (VS) is an analog audio shield for the Arduino or Arduino compatible boards that allows you to play audio sound bytes. It could be used in many different Arduino projects, such as; a talking clock, DIY Arduino talking GPS, robots,...
The Voice Shield (VS) is an analog audio shield for the Arduino or Arduino compatible boards that allows you to play audio sound bytes. It could be used in many different Arduino projects, such as; a talking clock, DIY Arduino talking GPS, robots, alarms, motion based sound effects, etc.
vs.jpg
Sunhayato Universal Shield
Prototyping shield available in either black or white.
Prototyping shield available in either black or white.
proto.jpg
Sunhayato Universal Shield Mega
Prototyping shield for the Arduino Mega, available in either black or white.
Prototyping shield for the Arduino Mega, available in either black or white.
protomega.jpg
SWFLTEK FRAM Shield
Note: the image is terrible! Can anyone supply a better one?   Up to 512K non-volatile, high speed, high endurance, static memory on an Arduino compatible shield.
Note: the image is terrible! Can anyone supply a better one?   Up to 512K non-volatile, high speed, high endurance, static memory on an Arduino compatible shield.
fram.jpg
Synthetos GRBL Shield
The grblShield is a complete hardware solution for Dank's CNC motion control system called grbl.
The grblShield is a complete hardware solution for Dank's CNC motion control system called grbl.
grbl.jpg
Unified Microsystems ATS-1 Terminal Shield
The ATS-1 Terminal Shield is a user interface module. Since it uses serial communications to the Arduino, it only uses the D0 and D1 I/O lines leaving the others for the application. Any other two I/O lines can be used if the program uses a softwa...
The ATS-1 Terminal Shield is a user interface module. Since it uses serial communications to the Arduino, it only uses the D0 and D1 I/O lines leaving the others for the application. Any other two I/O lines can be used if the program uses a software serial driver.   Other Features:
ats-1.jpg
Unsped Arduinome Shield
This shield works as a interface card for the Arduinome project, an 8 by 8 silicone button with LED matrix used to control sampling programs for live music acts.
This shield works as a interface card for the Arduinome project, an 8 by 8 silicone button with LED matrix used to control sampling programs for live music acts.
arduinome.jpg
Watterott mSD Shield
Shield providing a microSD socket and an optional TFT-touch-Display.
Shield providing a microSD socket and an optional TFT-touch-Display.
msd.jpg
Watterott RedFly Shield
WiFi/WLAN Shield.   Features:
WiFi/WLAN Shield.   Features:
redfly.jpg
Watterott S65 Shield
The S65 Shield features a color TFT-Display (176x132), microSD socket and rotary encoder.
The S65 Shield features a color TFT-Display (176x132), microSD socket and rotary encoder.
s65.jpg
Wavical Technologies OneWire Shield
Includes:
Includes:
onewire.jpg
Wayne and Layne Video Game Shield
The Video Game Shield allows the Arduino to produce a black and white TV video signal along with an audio signal, as well as connect to two Wii controllers and read data from both of them. A variety of examples are available, including Pong, Snake...
The Video Game Shield allows the Arduino to produce a black and white TV video signal along with an audio signal, as well as connect to two Wii controllers and read data from both of them. A variety of examples are available, including Pong, Snake, and audio demos.   The Video Game Shield is open source hardware.
videogame.jpg
Wicked Device Nano Prototyping Shield
Adds prototyping space and the ability to connect regular shields to the Arduino Nano.
Adds prototyping space and the ability to connect regular shields to the Arduino Nano.
nano.jpg
Wicked Device RBBB Proto Shield
Allows you to mount a Really Bare Bones Board, AKA RBBB, onto a prototyping shield, and add regular shields to it. All the pins are brought out into easy to access places, and it includes two onboard LEDs and a switch, already connected to ground....
Allows you to mount a Really Bare Bones Board, AKA RBBB, onto a prototyping shield, and add regular shields to it. All the pins are brought out into easy to access places, and it includes two onboard LEDs and a switch, already connected to ground.   Detailed step by step assembly instructions are online at shield.wickeddevice.com
rbbb-proto.jpg
Wicked Device Receiver Shield
Operates at 433MHz.   Not a full shield format, but designed to plug into some of the Arduino headers. Provided as a kit including the board, radio receiver, antenna, wire, and headers.
Operates at 433MHz.   Not a full shield format, but designed to plug into some of the Arduino headers. Provided as a kit including the board, radio receiver, antenna, wire, and headers.
receiver.jpg
Wingshield Industries ScrewShield
The ScrewShield is a "wing-format" shield that extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. You even get a few bonus terminals for extra GND and power!   No header pins are used by the shield itself: they are ...
The ScrewShield is a "wing-format" shield that extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. You even get a few bonus terminals for extra GND and power!   No header pins are used by the shield itself: they are all exposed for your own use.
screwshield.jpg
Wise Time Dual Bi-Color LED Matrix Shield
Provides LED display with 8x16 red/green/yellow pixels.
Provides LED display with 8x16 red/green/yellow pixels.
dual.jpg
Wise Time LED Matrix Shield
The LED matrix provides a display with a resolution of 8x8 red/green/yellow pixels. In addition, it also has an on-board push button and an infrared receiver. This combination allows the device to receive commands and to output feedback to the use...
The LED matrix provides a display with a resolution of 8x8 red/green/yellow pixels. In addition, it also has an on-board push button and an infrared receiver. This combination allows the device to receive commands and to output feedback to the user. The LED matrix shield is used mainly in Wise Clock.
matrix.jpg
Yawp Patch Shield v4.0
The patch shield is a cross between a patch panel/bay and a Wingshield. It's designed for times when you want to have remote sensors, or a control panel, or LEDs, or...practically anything where you want to avoid doing a lot of icky wiring!   The...
The patch shield is a cross between a patch panel/bay and a Wingshield. It's designed for times when you want to have remote sensors, or a control panel, or LEDs, or...practically anything where you want to avoid doing a lot of icky wiring!   The origins of this shield are unclear. It appears to originate at the site linked above. For kit information see:   http://www.adafruit.com/index.php?main_page=product_info&cPath=17_21&products_id=256
patch.jpg
Yawp Patch Shield v5.0
The patch shield is a cross between a patch panel/bay and a Wingshield. It's designed for times when you want to have remote sensors, or a control panel, or LEDs, or...practically anything where you want to avoid doing a lot of icky wiring!   The...
The patch shield is a cross between a patch panel/bay and a Wingshield. It's designed for times when you want to have remote sensors, or a control panel, or LEDs, or...practically anything where you want to avoid doing a lot of icky wiring!   The origins of this shield are unclear. It appears to originate at the site linked above. For kit information see:   http://www.adafruit.com/index.php?main_page=product_info&cPath=17_21&products_id=256
patch.jpg
Zach Hoeken Danger Shield
Provides a variety of useful inputs and outputs for various projects.
Provides a variety of useful inputs and outputs for various projects.
danger.jpg