Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
The first step in installing a base plate is to establish its __________. |
Location |
|
|
Equipment centerlines are laid out according to the building ___________________. |
Column lines |
|
|
Elevation is usually given on a blueprint as feet and inches above ___________________. |
Sea level |
|
|
The type of anchor that is set in a jig is the ________________________ type. |
Poured in concrete |
|
|
The capsule type anchor is one type or ____________ anchor. |
Epoxy |
|
|
Info as to the proper type and size drill bit to use with an expanding anchor is found in the _________________________________________________. |
Equipment manufacturers installation instructions |
|
|
The device that is used with a combination square to align a piano wire with a line on the floor is called __________. |
Tramplate |
|
|
When setting plate elevation using a optical level you should shoot the plate _______________________. |
At each jackbolt |
|
|
You can calculate the amount that a plate is out of level using a precision level and a ________________________. |
Feeler gauge |
|
|
The recommended torque for tightening an anchor bolt is given in the _____________________________________. |
Anchor manufacturers installation instructions |
