Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
What is the main difference between a propane tank and a propane cylinder |
The standards and approval agency responsible for certification |
|
What is the minimum rated working pressure of a propane tank |
250 PSI (1725 kPa) |
|
How far must weeds and long dry grass or other flammable materials be kept clear of a propane tank |
10'(3m) |
|
What part of a propane tank may be field welded |
Saddle plates or brackets |
|
What must be attached to a pressure relief valve installed on a propane tank |
A loose fitting rain cap to prevent rain and snow from entering the valve |
|
What is the purpose of the internal safety control |
To shut off the flow propane liquid in case of fire |
|
When must a pressure gauge be installed on a propane tank |
Propane tanks with a capacity over 2000 USWG (7500 L) require a pressure gauge |
|
Which of the following may not be used to determine the filling capacity of a propane tank |
A float gauge |