Related Essays

  • Bharat Heavy Equipment Repair Plant

    Units and helical worm gear shaft mounted on the vertical axis the main. Plate mounted on the upper part of the shaft spin at 40-65 rpm. To a certain mill, a...

  • Stepper Motor Reflection

    Table ‎2-2; Motor and Gearbox Rotation Specification Motor Gearbox Step Angle (Degrees) 1.8 0.11 Torque (Nm) 8.34 133 4.2.2 Motor and Gearbox Assembly...

  • Electro Mechanical Actuator Case Study

    1.1 Rotary Electro-mechanical Actuator Gearbox Requirements: The Gear Box at the Motor Output is intended to amplify the torque output of the Motor with red...

  • JEDR Report Conclusion

    Design Pulley and Belt System Contact angle = π + 2 x sin-1((D+d)/2C) Θ = π + 2 x sin-1((508+191.7)/(2 x 800)) Θ = 4.05 rad As stated in JEDR, the chosen ...

  • Hybrid Electric Vehicle Case Study

    The rotor is to be rotated by the electrical energy being supplied to the stator with this rotation being transferred through a drive shaft to a driven gear....

  • Lawn Mower Case Study

    This small but versatile machine comes equipped with features such as 6 speed transmission, 30'' side

  • Compare And Contrast Stroke And Two Stroke Engine

    Parts of a 2 Stroke Engine | eHow. [online] eHow. Available at: http://www.ehow.com/about_5393868_parts-stroke-engine.html [Accessed 3 Dec.

  • How To Write A Wind Energy Essay

    This rotor is attached to three long blades spinning on a horizontal axis

  • Surfrainbow's Competitors

    SilenSync Helical Offset Tooth (H.O.T) timing belts combine sprocket and belt in a synchronous package. o Continental ContiTech Belts and Pulleys: The produ...

  • Royal Enfield Case Study

    The Eicher gathering is one of the India's driving car bunches with expanded hobbies in the assembling of tractors, business Vehicles, Automotive Gears, Expo...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/4

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

4 Cards in this Set

  • Front
  • Back
Engine to Upper Sheave
Four double Vee-belts with 0.778:1 speed reducing ratio
Upper Sheave to Drive Line
Sprag type overrunning clutch
Drive Line to Main Rotor
Spiral Bevel gears with 11:57 speed reducing ratio
Drive Line to tail Rotor
Spiral bevel gears with 31:27 speed increasing ratio