Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
26 Cards in this Set
- Front
- Back
What standard must a full body harness meet |
Csa |
|
How often must you inspect fall arrest equipment |
Before use on each shift |
|
How much must a ladder protrude |
1m |
|
Scaffold must hold at least |
4 times the load that may be imposed |
|
You must have a guard rail at? |
10ft |
|
Safe working load (swl) defined |
Breaking strength divided by safety factor |
|
Lifting or transporting workers factor of safety |
10/1 |
|
What is recommend when attaching the hook to an eye bolt |
Always use a shackle |
|
Recommended sling angle when rigging a load |
Must not be less than 60degrees |
|
A right regular lay rope has? |
Strands twisted to the right wires to the left |
|
Knot that ties two ropes of different diameters |
Sheet bend |
|
Iwrc stands for what |
Independent wire rope core |
|
A knot in a rope will decrease its strength by |
50% |
|
General rigging and hoisting with wire rope factor |
5/1 |
|
A square knot is also referred to a ____ |
Reef knot |
|
Front (Term) |
Square or reef knot |
|
Front (Term) |
Clove hitch |
|
Front (Term) |
Timber hitch |
|
Front (Term) |
Bowline |
|
Front (Term) |
Sheet bend |
|
Front (Term) |
Sheet bend |
|
Type of steel used to make wire rope |
Improved low steel |
|
Main parts of a block |
Shell Sheaves Centre pin Straps |
|
Snatch block has one or more ——- |
Sheaves |
|
Hand operated winch is? |
Tirfor |
|
Name two categories of levels |
Optical Laser |