Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
How does the text define lift? |
One complete set of hoisting action's performed by workers who transport a load from a Starting point to a destination |
|
What is breaking strength |
The tension at which a material is expected to break. |
|
How is over head crain defined |
An individual crane composed of a hoist trolley that travels along a horizontal bridge beam, which travels along a pair of overhead runways |
|
When is a qualified engineer required for lift planning |
Lift requires equipment and precedures that are unsual and do not conform to established standards |
|
How is fall zone defined |
An area where partially or completely suspended materials might land if they become loose form a load or if the rigging or crane fails |
|
Are non standards hand signals ever permitted during a lift? |
Only if the standard signal set is not practical |
|
Know the hand signals for Raise boom, lower boom, hoist, crawler crane travel both tracks |
50-57 pages to study |
|
What is the volume of copper rod 96" in length and 3/4 in diameter |
42.11 1/4 π•d2•L |
|
How is chain defined? |
A series of connected metal links |
|
How should a load be lifted if center of gravity calculations haven't been done |
Move lifting points based on small lifts to find center |
|
The rated load is the ____ _____ that a rigging component may be subjected to while maintaining an appropriate margin of safety |
Maximum tension |
|
A _____ inspection is a thorough rigging equipment inspection performed at the beginning of each work day or shift by the user of equipment |
Frequent |
|
The strenght of the chain and chain attachments depend on? |
The steel alloys from which they are made |
|
To prevent it's inadvertent use, damaged equipment must be properly _____ as such until it can be _____ or ______ |
Tagged Repaired or destroyed |
|
Wire rope is composed of a core surrounded by strands, each of which is composed of a specific pattern of wires of |
Different size |
|
What is the primary advantage of synthetic slings |
Generally Resistance to most common industrial chemicals |
|
Know fallowing slings types |
|
|
What type of wire expose wires to wear at the outer surface, which increases the useful life of the ropes |
Lang lay rope |
|
___ ___ manilia rope is allowed for use in lifting equipment in a rigging application |
Number one |
|
_____ is the combination of ropes and accessories used with blocks to gain mechanical advantage for lifting |
Tackle |
|
_____ is the distance from the cup of a hoists top hook to the cup of the hoist hook when it is at its upper limit of travel |
Head room |