Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
|
When is the RCDR normally on in AUTO?
|
- On the ground, for 5 minutes after electric power is supplied to aircraft
- When at least 1 engines is operating - Stops 5 minutes after the last engine is shut down |
|
|
What does the CVR record?
|
ACPs and cockpit area microphone
|
|
|
How do you record the ITM's PAs?
|
ACP 3 PA VOL knob out and in the 1 o'clock position
|
|
|
How do you test the RCDR?
|
- RCDR ON
- Parking brake ON - Press the CVR TEST pushbutton (4 tones) |
|
|
How do you erase the RCDR tape?
|
- RCDR ON
- Aircraft on the ground - Parking brake ON - Press the CVR ERASE pushbutton (2 seconds) |
|
|
When does the Digital Flight Data Recorder operate?
|
- On the ground for 5 minutes after electrical power is supplied to the aircraft
- When at least 1 engine is running - Continuously in flight, whether or not the engines are operating - Stops 5 minutes after the last engine is shut down |
|
|
What is the position of the RCDR pushbutton during pre-flight?
|
ON
|
|
|
When will the RCDR ON light extinguish?
|
After the first engine is started
|
|
|
What is the purpose of the DFDR EVENT pushbutton? |
Briefly pressing this button sets an event mark on the Flight Data Recorder. |
