Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
What is a good way to prevent double exposure?
|
Lay out all the films in order before you begin
|
|
What is the visual result of film contamination?
|
blackness
|
|
What is the error?
|
double exposure
|
|
What is the error?
|
double exposure
|
|
What is the general error here and what is causing the markings on the right?
|
Film backwards; lead foil
|
|
Is this blackness caused by over or under development?
|
over
|
|
Is this extra whiteness caused by over or under development?
|
under
|
|
The excess whiteness is caused by under or over development?
|
under
|
|
In this case, the developer and fixer are mixed because some residual chemicals were carried over from what holding device?
|
hanger clips
|
|
What is the error here? (Hint: it took place within the processing unit)
|
dirty film rollers
|
|
What is the error here? (Hint: it took place within the processing unit)
|
dirty film rollers
|
|
What errors are shown here within the blue circles?
|
fingerprints
|
|
What is the error in the red circles?
What is the error in the orange circles? |
red - watery developer stain
orange - prophy paste (or calculus) |
|
What is the black mark likely caused by? (Hint: in the processing step)
|
developer stain
|
|
The black shadow on the right is caused by what?
|
another film that is stick to the other
|
|
What error is in the purple circle?
|
fingerprints
|
|
What is the error in the purple circle?
|
someone wrote their name on it... idiot.
|
|
What caused the black lines in the green circles?
|
fingernails
|
|
What is wrong here?
|
The emulsion is scratched
|
|
What is causing the errors on this film?
|
static
|
|
These black lines are caused by what?
|
dirty rollers
|
|
What was not removed from the film before processing?
|
Black protective paper
|
|
What is wrong here?
|
Two films stuck together
|
|
What is causing the three different errors here?
|
green - BID cut
orange - fixer contamination purple - insufficient washing (brown stains) |
|
What error is indicated by the black line in the blue circle? White dots in the orange circle?
|
blue - rough handling
orange - air bubbles |
|
What caused the little white area?
|
fixer contamination
|
|
These black scratches are likely caused by what?
|
dirty rollers
|
|
The white line here is on a PSP plate is caused by?
|
mishandling
|
|
Is this grid pattern normal?
|
Yes, this is a PSP plate! This is normal. It is used for measurements
|
|
What error is in the blue circle?
Orange circle? |
Blue - mishandling
Orange - air bubbles |