Related Essays

  • Case Study Of Rotor And Touchdown Bearing Models

    Radial displacement of the rotor is "e" _"r" , which can be expressed as follows [4]: "e" _"r" "=" √("e" _"x,r" ^"2" "+" "e" _"y,r" ^"2" ) (17) where ...

  • A Comparative Analysis Of Parameters Of Water Turbines

    Table 2.1: Parameters of tested water turbines (by Shionoet.al, 2002) Solidity (σ) Chord length (C) (mm) Blade inclination angle(ɸ)(°) Height (h) ...

  • Difference Between Power And Anaerobics

    Wingate Major Project Jonah Hopkins, Baedon Gilbert-Williams, Jil Patel, Brandon Barnsenbach Mohawk College Nicholas Patrella, Jason Macculloch December 24th...

  • The Importance Of Unbalance

    It has included four diagrams, two tables and discussion section for results. Theory[1] Rigid Rotor: Working speed is lower than the lowest-order critic...

  • JEDR Report Conclusion

    (37.62b x 〖9.45〗^2)/9.81 = 342.46b Find torque with Ks = 1.4 and nd = 1.1 T = (H x K_s x n_d)/(2π x ω/60) = (45,000 W x 1.4 x 1.1)/(2π x (939.89 RPM)/60) = ...

  • Bharat Heavy Equipment Repair Plant

    Units and helical worm gear shaft mounted on the vertical axis the main. Plate mounted on the upper part of the shaft spin at 40-65 rpm. To a certain mill, a...

  • Analysis: Loads And Structural Momentum Theory

    2 Loads and Structural Stress Because of the energy content of the wind is relative to the cube of the wind speed, turbine blades exposed to wind spe...

  • Ergonomics: Human Engineering, Human Factors

    Some of the rotors that are assembled on the rotating side includes the LPT (low pressure turbine), HPT (high pressure turbine), blade up, Compressor, fan an...

  • How To Build A Turbofan

    The model is built in Pacelab and include a preliminary study of the rotary engine needed for the turbofan, the weight, dimenssions and most important desi...

  • Husqvarna Lc221a Research Paper

    Provides for excellent traction on hills or on wet grass. 8 inch ball bearing wheels on front and rear. 4 point height adjustment. Adjust cutting height f...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/1

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

1 Cards in this Set

  • Front
  • Back
Main Rotor Description
Articulation.....................Free to teeter and cone, rigid inplane;
Number of Blades.................................................................2;
Diameter..........................................................................33ft.;
Blade Chord.............................................10.0 inches inboard;
................................................................10.6 inches outboard;
Blade twist..............................................................-6 Degrees;
Tip Spd (102%rpm).....................................................705FPS;