• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/16

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

16 Cards in this Set

  • Front
  • Back
What does the hierarchical network layer address provide?

A) The node address and the hardware address
B) The hardware address
C) The network address mapped to the hardware address
D) The network address and the node address
0
Frame Relay is designed so that error checking will be done through higher-layer protocols and application services?

A) TRUE
B) FALSE
0
Given an IP address of 125.3.54.56, without any subnetting, what is the network number?


A) 125.0.0.0
B) 125.3.0.0
C) 125.3.54.0
D) 125.3.54.32
0
What is meant by a "broadcast system"?


A) Only few nodes on the network see the data meant for these nodes
B) All nodes on the network see all the data frames
C) Network informs all the nodes of a network failure
D) None of these
0
Which of the choices below are true regarding Ethernet?

(Choose 3)

A) Uses IEEE 802.3
B) Invented by IBM
C) A LAN specification
D) Uses IEEE 802.5
E) invented by Xerox
0
Which OSI reference model layer does Telnet function at?


A) Network
B) Transport
C) Application
D) Session
E) Presentation
o
Which method of switching has the highest latency?

A) FragmentFree
B) FastCell
C) Cut-Through
D) Latency
E) Store and Forward
0
What are some advantages of LAN switching (choose all that apply) ?

(Choose 3)

A) easy migration
B) Larger Collision domains
C) Fast Ethernet
D) media-rate adaption
E) full-duplex communication
0
Select the valid WAN terms (choose all that apply).

A) LAN
B) PIX
C) CSU
D) RPG
E) LLC
0
Which of the following protocols are routed protocols (choose all that apply)?

(Choose 2)

A) RIP
B) IPX
C) IP
D) IGRP
E) MTU
0
In a Cisco router, configuration register information can be used to:


(Choose 3)

A) Select a boot source and default file name
B) Enable booting from a TFTP server
C) Load operating software from ROM
D) Enable secret functions
E) None of these
0
Select from below examples of OSI Layer 2 protocols.

(Choose 2)

A) Ethernet
B) Token Ring
C) TCP
D) IP
E) IPX
0
What format is used for a standard IP access list?

A) access list [number] [permit/deny] [source address]
B) access-list [number] [permit/deny] [source address] [destination address]
C) access list [number] [permit/deny] [source address]
D) access-list [number] [permit/deny] [source address]
E) access-list [source address] [number] [permit/deny]
0
1) What does the hierarchical network layer address provide?

A) The node address and the hardware address
B) The hardware address
C) The network address mapped to the hardware address
D) The network address and the node address

2) Frame Relay is designed so that error checking will be done through higher-layer protocols and application services?

A) TRUE
B) FALSE

3) Given an IP address of 125.3.54.56, without any subnetting, what is the network number?


A) 125.0.0.0
B) 125.3.0.0
C) 125.3.54.0
D) 125.3.54.32

4) What is meant by a "broadcast system"?


A) Only few nodes on the network see the data meant for these nodes
B) All nodes on the network see all the data frames
C) Network informs all the nodes of a network failure
D) None of these

5) Which of the choices below are true regarding Ethernet?

(Choose 3)

A) Uses IEEE 802.3
B) Invented by IBM
C) A LAN specification
D) Uses IEEE 802.5
E) invented by Xerox

6) Which OSI reference model layer does Telnet function at?


A) Network
B) Transport
C) Application
D) Session
E) Presentation

7) Which method of switching has the highest latency?

A) FragmentFree
B) FastCell
C) Cut-Through
D) Latency
E) Store and Forward

8) What are some advantages of LAN switching (choose all that apply) ?

(Choose 3)

A) easy migration
B) Larger Collision domains
C) Fast Ethernet
D) media-rate adaption
E) full-duplex communication

9) What is the part of the IOS software that provides the user interface and interprets the commands you type?


A) The virtual terminal
B) The command executive
C) The console port
D) The configuration register
0
MTU is an acronym which stands for Maximum Transmission Unit?

A) TRUE
B) FALSE
MTU is an acronym which stands for Maximum Transmission Unit?

A) TRUE
B) FALSE
What access list command would you use to allow packets from host 168.177.213.12?

A) access-list 20 no deny 168.177.213.12
B) access-list 20 allow 168.177.213.12
C) access-list 199 permit 168.177.213.12
D) access-list 200 permit 168.177.213.12
E) access-list 20 permit 168.177.213.12
What access list command would you use to allow packets from host 168.177.213.12?

A) access-list 20 no deny 168.177.213.12
B) access-list 20 allow 168.177.213.12
C) access-list 199 permit 168.177.213.12
D) access-list 200 permit 168.177.213.12
E) access-list 20 permit 168.177.213.12