Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
58 Cards in this Set
- Front
- Back
|
Disk versus recording your mix to a track within your session?
A.) Internal Layback allows you to choose a different sample rate. B.) Bounce to Disk can write a new file 4x times faster than real-time. C.) Internal Layback allows you to use POW-r Dither, Bounce to Disk does not. D.) Bounce to Disk allows you to change file format, bit-depth, and sample rate. E.) None of the above |
Answer:
first half of question is missing, but I think the answer is D. (Bounce to Disk allows you to change file format, bit-depth, and sample rate) |
|
|
In the image Shown, what with be the result when menu item "3" is selected?
A.) Only alternate playlist lanes with clips rated "3" will be shown. B.) Only alternate playlist lanes with clips rated "1" and "2" will be shown C.) Only alternate playlist lanes with clips rated "1", "2", and "3" will be shown D.) Only alternate playlist lanes with clips rated "3", "4", and "5" will be shown. E.) Only alternate playlist lanes with clips rated "4" and "5" will be shown |
Answer:
Only alternate playlist lanes with clips rated "3", "4", and "5" will be shown. |
|
|
Beat Detective is commonly used to tighten muti-track drum performances. Why is it important to ensure that edits are applied across all drum tracks at once?
A) To ensure that edits are smooth and without gaps B) To make sure edits fall on the grid C) To prevent false triggers D) To maintain phase between tracks E) To prevent clip overlaps |
Answer:
To maintain phase between tracks |
|
|
What modifier keys can be used along with the +/- keys to nudge the end time of a selection?
A.) Option+Shift (mac) / Alt+Shift (win) B.) Command+Shift (mac) / Ctrl+Shift (win) C.) Control+Shift (mac) / Start+Shift (win) D.) Command+Option+Shift (mac / Ctrl+Alt+Shift E.) None of the Above |
Answer:
Command+Shift (mac) / Ctrl+Shift (win) |
|
|
To select from the cursor to the beginning of the session, press...
A.) Command+Return (mac) / Ctrl+Enter (win) B.) Shift+Return (mac) / Shift+Enter (win) C.) Option+Return (mac) / Alt+Enter (win) D.) Control+Return (mac) / Alt+Enter (win) E.) Option+Shift+Return (mac) / Alt+Shift+Enter (win) |
Answer:
Shift+Return (mac) / Shift+Enter (win) |
|
|
To monitor the input of any track during playback without it being record-enabled, which monitoring mode should be used?
A.) Auto-Input Monitoring B.) Selective Recall monitoring C.) Input Only Monitoring D.) Either A or C E.) Non of the above |
Answer:
Input Only Monitoring |
|
Based on the image, how many drives may be used for audio playback?
A.) 0 B.) 1 C.) 2 D.) 3 E.) 4 |
Answer:
3 drives (R indicates drives for recording and playback, P indicates only playback, and T indicates transfer only.) |
|
|
Settings for Delay Compensation are made in the ______________________ window.
A.) Session Setup B.) Hardware Setup C.) Playback Engine D.) Event Operations E.) Pro Tool Preferences |
Answer:
Playback Engine |
|
True or False: Refer to the Image. When playback begins at the beginning of the timeline, breath control automation will be played back.
|
Answer:
False (image indicates automation is set to auto off) |
|
|
Refer to the image. Which of the following are ways to change the destination drive for the superF track?
A.) Click on the tracks root media folder (A) and select a destination from the pop-up menu. B.) Select "Custom Allocations Options" and Click the Change Button (B) C.) Select "Use round robin allocation for new tracks" (C) D.) All of the above E.) A and B only |
Answer:
Click on the tracks root media folder (A) and select a destination from the pop-up menu. (B&C won't change the specific track because it is already existing) |
|
|
In order for identify Beat feature to be available, what must be enabled?
A.) Tick-Based Session Linearity B.) Insertion Follows Playback C.) Conductor Track/Tempo Ruler D.) MIDI Merge E.) Relative Grid Mode |
Answer:
Conductor Track/Tempo Ruler |
|
TRUE or FALSE: Refer to the image. The Xpand Instrument track is being recorded to an audio track. The effect of the SansAmp plugin (on the Xpand Instrument Track) will be recorded to the audio file.
|
Answer:
True ( sansamp is inserted after Xpand but before the input of the target audio track) |
|
Based on the Image, the fade created will be with _______________ linking.
A.) equal RMS B.) equal power C.) equal gain D.) dynamic E.) none |
Answer:
none |
|
|
In the Image, What is the area outlined in red?
A.) An automation playlist lane B.) A MIDI velocity Lane C.) The empty playlist lane (for creating new edit playlists) D.) The Clipboard view (for copying and pasting saved clips) E.) The Elastic Ruiler (for applying warps and pitch bends) |
Answer:
C.) The empty playlist lane (for creating new edit playlists) |
|
|
You open a Pro Tools session you have received from another Pro Tools user and blue Offline Clips what would allow you to to choose Relink Offline option?
A.) Workspace Browser B.) Task Manager C.) Volume Browser D.) Project Browser E.) Clip List |
Answer:
Project Browser |
|
True or False: Refer to the Image. A fade in applied to the clip group shown below would be applied to all four tracks.
|
Answer:
True |
|
|
Given a meter of 9/8 time, which click value should you choose to hear three clicks per measure?
A.) Eighth Note B.) Dotted Eighth Note C.) Quarter Note D.) Dotted Quarter Note E.) Half Note |
Answer:
Dotted Quarter Note (not completely sure, look at page 7 (23) of the 210m book) |
|
|
Refer to the Image. The "R" in the upper right-hand corner of the clip indicates that ___________________.
A.) The clip has been altered using the Real-Time Properties Edit window view. B.) The clip has been altered using the Real-Time Properties floating window C.) The clip has been altered using the Real-Time elastic processing D.) The Clip has been altered using the rendered elastic processing E.) The Clip was created in Pro Tools 9 or earlier |
Answer:
The clip has been altered using the Real-Time Properties floating window (not edit window view) |
|
Automation can be manually auto-matched (while in write or latch mode), by holding the Command (mac) or CTRL (win) key and clicking which button?
A.) A B.) B C.) C D.) D E.) E |
Answer:
E (Automation Mode Selector) |
|
|
What modifier key can be used in addition to the +/- keys to nudge a clip's contents?
A.) Command (mac) / Ctrl (win) B.) Option (mac) / Alt (win) C.) Control (mac) / Start (win) D.) Shift E.) Command+Shift (mac) / Ctrl+Shift (win) |
Answer:
Control (mac) / Start (win) |
|
|
You are running a Pro Tools|HD system with a very large session using all 192 voices and want to record one new audio track but you do not have a voice spare to assigne to the Record Track which of the following will free up a voice to enable recording?
A) Bypass all plug-ins on a different track B) Remove the send assignments on a different track C) Mute a different audio track durring playback D) De-activate a different track by right clicking on the Track Nameplate E) Remove the Input Assignment on a different track |
Answer:
De-activate a different track by right clicking on the Track Nameplate |
|
Based on the Image below, how many drives will be used if "Use Round Robin Allocation for New Tracks" is enabled?
A.) 0 B.) 1 C.) 3 D.) 5 E.) 6 |
Answer:
3 (drives that are enabled for recording, "R" ) |
|
|
What type of crossfade linking is most commonly used for transitions between audio material that is not phase aligned?
A) equal RMS B) equal power C) equal gain D) dynamic E) none |
Answer:
none |
|
|
What modifier key was held to show the Tempo Ruler pop-up menu shown in the image?
A.) Option (mac) or Alt (win) B.) Command (mac) or CTRL (win) C.) Control (mac) or CTRL (win) D.) Option+Shift (mac) or Alt+Shift (win) E.) Command+Control (mac) or Start+CTRL (win) |
Answer:
Command (mac) or CTRL (win) |
|
|
If you wish to route a specific output from a Structure plug-in directly to another track in the Mix window, where would you assign the input on the destination track?
A.) In the destination track's instrument section B.) In the destination track's inserts section, using the Structure Rewire plugin C.) In the source track's main input selector pop-up menue D.) In the destination track's main input selector pop-up menue. E.) From the AudioSuite drop-down menu. |
Answer:
In the destination track's main input selector pop-up menu. |
|
|
The "Import Session Data" feature can be used for __________________.
A.) Importing tracks with existing audio, MIDI, and automation data. B.) Importing blank tracks with input, output, and plug-in assignments in place C.) Toggling a session's sample rate and/or bit depth between preset configurations D.) Importing Mix and Edit Groups E.) A, B, and D |
Answer:
E. (A,B,D) A.) Importing tracks with existing audio, MIDI, and automation data. B.) Importing blank tracks with input, output, and plug-in assignments in place D.) Importing Mix and Edit Groups |
|
|
TRUE or FALSE. Playlists can be deleted only if they are unused (not assigned to a track).
|
Answer:
False |
|
|
Refer to the Image. Which key combination was held to reveal the menu shown?
A.) Shift+Option (mac) or Shift+Alt (win) B.) Control+Option (mac) or Start+CTRL (win) C.) Control+Command (mac) or Start+CTRL (win) D.) Control+Option+Command (mac) or Start+Alt+CTRL (win) E.) Shift+Control+Option+Command (mac) or Shift+Start+Alt+CTRL (win) |
Answer:
Control+Option+Command (mac) or Start+Alt+CTRL (win) |
|
|
Which of the following tracks will be unaffected by any type of key change events?
A.) MIDI tracks B.) Sample-based Instrument Tracks C.) Audio Tracks D.) Non-Pitched tracks E.) C and D |
Answer:
Audio Tracks Non-Pitched tracks |
|
|
An edit Playlist can be defined as __________________.
A.) the Edit window tool cluster that allows the user to control playback modes, such as fast forward, rewind, and loop playback B.) a list of MIDI data, such as pitch, velocity, etc. that can be accessed from the Event drop-down menu C.) an arrangement of clips on a track D.) a new window in Pro Tools 10 that shows MIDI data in traditional notation form E.) a feature that, when enabled, will automatically quantize MIDI data as it is recorded. |
Answer:
an arrangement of clips on a track |
|
Manually dragging a session's song start marker (shown here) will effect the timing of the clips on ________________.
A.) Sample-based Tracks B.) Tick-based Tracks C.) Video Tracks D.) Both A and B E.) Non of the above |
Answer:
Tick-based Tracks |
|
|
What modifier key can be used in addition with the +/- keys to trim a clip's end point by the nudge value?
A.) Command (mac) / Ctrl (win) B.) Option (mac) / Alt (win) C.) Ctrl (mac) / Start (win) D.) Shift E.) Command +Shift (mac) Ctrl+Shift (win) |
Answer:
Command (mac) / Ctrl (win) |
|
|
Which of the following best describes the effect on tempo when the Bar|Beat Marker indicated in the image is dragged to the left or the right?
A.) A new tempo will take effect at the indicated Bar|Beat marker B.) A new Tempo will take effect at the previous Bar|Beat Marker C.) Tempo will not change D.) A and B E.) None of the above |
Answer:
A and B ( A new tempo will take effect at the indicated Bar|Beat marker & A new Tempo will take effect at the previous Bar|Beat Marker) |
|
Refer to the Image. A track has an Edit Selection on it which of the following Pro Tools functions also cause the track to be selected.
A.) A B.) B C.) C D.) D E.) E |
Answer:
Link Track and Edit Selection (D) |
|
Refer to the Image. Which of the following will only appear when a Pro Tools|HD system is installed as a system?
A.) A B.) B C.) C D.) D E.) E |
Answer:
D (Number of Voices) |
|
|
When drawing tempo changes, changing settings in the Tempo Density button (indicated below) allows you to determine ________________.
A.) The shape of the line that will be drawn B.) The spacing of the tempo events that will be drawn C.) the note value that BPM rates are based on when tempo is drawn D.) the range of scaling allowed by the trim tool on any drawn tempo line E.) The scale of the tempo map as it is viewed in the Tempo Editor ruler |
Answer:
The spacing of the tempo events that will be drawn |
|
|
How can you link a Window Configurations to a Memory Location?
A.) Select an existing memory Location from within the New Window Configuration dialog box. B.) Select a Window Configuration from within the New Memory Location dialog box. C.) Recall an existing Window Configuration and choose File > Link To > Memory Location. D.) Drag a Window Configuration from the Window Configuration List onto the Memory Locations window. E.) Click on a Window Configuration, then Shift-click on a Memory Location. |
Answer:
Select a Window Configuration from within the New Memory Location dialog box. |
|
|
You have a recording session about to commence and you are setting up the Structure of the session using Memory Locations to make it more efficient to move around the session, wich of the following time based memory Location Properties would you use to identify the start of each section.
A.) Track Show/Hide setting B.) Marker C.) Track Hight settings D.) Group Enables E.) Zoom settings |
Answer:
Marker |
|
|
Bassed on the Image, the fade created will be with ______________ linking.
A.) equal RMS B.) equal power C.) equal gain D.) dynamic E.) none |
Answer:
Equal gain (no image) |
|
Which of the areas labeled in the picture would you click to access the Playlist pop-up menu with options to create and manage Playlists?
A.) A B.) B C.) C (right-click) D.) D (right-click) E.) E |
Answer:
B (triangle to the right of the track name) |
|
|
Inorder to move a volume fader with fine resolution (.1 dB increments), hold the _________________ key.
A.) Option (mac) or Alt (win) B.) Command (mac) or CTRL (win) C.) Control (mac) or Start (win) D.) Shift E.) F |
Answer:
Command (mac) or CTRL (win) |
|
True or False: In the screenshot below, the Xpand Instrument track is being recorded to an adio track. The effect of the SansAmp plugin (on the Xpand Aud. Track) will be recorded to the audio file.
|
Answer:
False (The Sansamp plugin will be inserted after the recording in signal flow) |
|
|
If you want to delete a section of a song, you might do it using Shuffle edit mode or using the Cut Time feature. What is a specific advantage of using the Cut Time feature?
A.) Cut Time automatically reduces the tempo by half. B.) Cut Time provides an option for realigning only sample-based rulers, markers, and tracks. C.) Cut Time provides an option fo realigning only tick-bassed linearity to tick-based linearity. D.) Cut Time automatically changes your session from sample-based linearity to tick-based linearity E. There is no advantage - Cut Time operates identically to shuffle mode in all ways. |
Answer:
Cut Time provides an option for realigning only sample-based rulers, markers, and tracks. |
|
Refer to the Image. Which of the following Scrolling Options has been enabled?
A.) None B.) After playback C.) Page D.) Continuous E.) Center Playhead |
Answer:
Continuous |
|
|
Refer to the Image. If the tempo is lowered, what will happen to the audio shown in the track?
A.) The audio will retain is absolute position and duration B.) The audio clip will move to retain its Bar|Beat position, but remain the same absolute duration. C.) The audio clip will move to retain its Bar|Beat position, and its duration will stretch to match the D.) The audio clip will go offline until the tempo is returned to the original value. E.) The audio clip will separate into 230 ms slices and convert the region to a region group. |
Answer:
The audio will retain is absolute position and duration |
|
|
Automatic Delay Compensation can be made active from the __________ menu.
A.) File B.) Edit C.) Event D.) Options E.) Setup |
Answer:
Setup |
|
|
Changes made in the Real-Time Properties floating window may be applied to __________________.
A.) Selected Audio Tracks B.) Selected MIDI-bassed tracks C.) Selected MIDI regions D.) All of the above E.) B and C only |
Answer:
Selected MIDI-bassed tracks & Selected MIDI regions (B&C) |
|
Based on the Image, the fade created will be with ____________ linking.
A.) equal RMS B.) equal power C.) equal gain D.) dynamic E.) none |
Answer:
equal power |
|
True or False. "Find All Candidates" option in the Relink window searches for only a single missing file at a time.
|
Answer:
True |
|
|
The blue adjustment handles shown on the tempo curve in the screenshot allow you to:
A.) Adjust the shape and sise of the tempo graph B.) Specify the Tempo Resolution for the curve (note value used for BPM rates) C.) Specify the Edit Density for the curve (density of tempo events in the curve) D.) Toggle between different Pencil tool curve shapes E.) Toggle curve segments between tick mode and sample mode |
Answer:
Adjust the shape and sise of the tempo graph |
|
|
What is the effect of the option-clicking on a tempo event?
|
deleted from the tempo ruler
|
|
|
you are asked to remove audio bleed from a set of audio clips on the same audio track which pro tools function would be the most efficient to use?
A. Standard trim tool B. Strip Silence Extract C. Strip Silence Separate D. Strip Silence Strip E. Insert Silence |
D. Strip Silence Strip
|
|
|
TRasposing Midi information using the "to" option will___?
|
Transpose notes to a single pitch
|
|
|
In order to use the "replace clips" feature while dragging a clip from the clips list, hold the ______________ key while dragging the clip.
|
Command-shift (mac) Control-shift (pc)
|
|
|
Midi merge can be activated when recording midi to an existing midi or instrument track to ensure that_____?
|
Existing data is not overwritten
|
|
|
In the score editor, what do the quantization settings do in the notation display track settings?
|
They adjust the way not timings and lengths are displayed as notation, without changing the actual MIDI notes
|
|
|
View presets in any digibase browser will store which of the following data?
|
Customized column arrangements
|
|
When duplicate is clicked, what will happen
|
A duplicate playlist wil be created on all members of the "V's" group
|
