Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
What is the purpose of dynamic dampers on crankshafts
|
They reduce engine vibration
|
|
What types of bearings are generally found in reciprocating engines
|
1. Plain
2. Ball 3. Roller |
|
Are the connecting rods used in each cylinder of a radial engine the same? Explain
|
No. Radial engines use master and articulating rod assemblies
|
|
Name the different types of piston rings
|
1. Oil control
2. Compression 3. Oil scraper |
|
Where should piston ring gaps be installed relative to each other and why
|
Compression ring gaps should be staggered so that they do not align. This prevents excessive blow-by
|
|
What could result from incorrectly installed piston rings
|
Excessive oil consumption
|
|
What purpose do oil control rings serve
|
They regulate the thickness of the oil film on the cylinder walls
|
|
What is used to help prevent valve surge or floating in an aircraft engine
|
Two or more springs are used on each valve
|
|
On engines equipped with hydraulic valve lifters, what should the running valve clearence be
|
Zero
|
|
What is the purpose of valve overlap
|
1. It allows better volumetric efficiency
2. lowers cylinder operating temperatures |