Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
|
What determines whether or not a 100-hour inspection is required for an aircraft? |
If the aircraft is used to carry persons for hire or used for giving flight instructions |
|
|
Where can you find a list of items that should be inspected on a 100-hour and an annual inspection of an aircraft engine? |
14 CFR part 43 appendix D |
|
|
In what publication can a mechanic find the operating limitations for an aircraft engine? |
On the type certificate data sheet for the engine |
|
|
Who is authorized to perform the power plant inspection that is required for annual inspection? |
A mechanic with an Airframe and powerplant rating and an inspection authorization |
|
|
What are two types of compression checks that can be performed on an aircraft reciprocating engine? |
Direct compression check or differential compression check |
|
|
What items are checked in a hot section inspection of a turbine engine? |
Check for cracks and distortions on the combustion section, the turbine wheels, turbine case, exhaust sections are also checked for cracks indications of overheating and any warpage, erosion or burning |
|
|
What is the most common type of damage that is found in the hot section of turbine engines? |
Cracks due to the overheat conditions in the hot section |
|
|
Is the use of a checklist required when performing an annual or 100-hour inspection in an aircraft engine? |
Yes |
|
|
What inspection must be performed on an aircraft reciprocating engine if it has been operated on turbine fuel? |
The inside of the cylinders must be inspected with the borescope, the oil must be changed and the filters examined, and the engine given a careful run-up and operational check |
