Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
When does a chain on a chain saw need to be replaced? |
When it has 3 missing teeth in a row, 6 missing teeth total, or 1 broken link. |
|
What kind of chain saws are carried on engines and what chain is on them? |
All carry MS 460 chain saws with carbide chains. |
|
What kind of saw does rescue 1 carry? |
Circular saw |
|
Truck 1 and Truck 6 carry: |
2 MS 460s one has a bullet chain and the other has a carbide chain. Also carries 1 circular saw with mason art blade and 1 with a combo blade. |
|
Brush 4,5,and 6 carry |
2 MS 460 chain saws |
|
What is the appropriate tension of the chain on a chain saw? |
With the chain pulled upward of the bar there should be approximately 1/8 th of an inch. |
|
Chainsaws should be placed back in service in what position? |
The full choke position. |
|
T/F: the guide bar should be rotated when chain is removed to extend the bar life? |
True |
|
So you use the decompression valve with the choke? |
No |
|
T/F: always return a saw to its proper state of readiness when you are finished with your assignment? |
True |
|
What is the running RPM of chain saws? |
13,500 rpm |
|
What is the running RPM of chain saws? |
13,500 rpm |
|
What is the running rpm spec for the K-14? |
9,300 rpm |