Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
25 Cards in this Set
- Front
- Back
M9 service pistol
|
It is a semiautomatic, maga-zine-fed, recoil-operated, double-action pistol
|
|
theM9 service pistol’s magazine holds
|
15 rounds andis chambered with a 9-mm ball (NATO M882round).
|
|
The M9 service pistol has a maximumeffective range
|
50 meters (54.7 yards).
|
|
single-action mode
|
allows the pistol to befired when the hammer is cocked
|
|
Slide Assembly
|
houses the firing pin, firingpin block, striker, extractor, and loaded chamberindicator, and it cocks the hammer during recoil.
|
|
Extractor
|
pulls the brass from the chamberafter the round is fired.
|
|
Magazine Catch Assembly
|
secures the maga-zine in place when loading, and it releases themagazine from the pistol when unloading
|
|
Barrel Assembly
|
Glossary -houses the round for firing,directs the projectile, and locks the barrel in posi-tion during firing.
|
|
Receiver
|
Glossary-- supports the major components, con-trols the functioning of the pistol, and holds themagazine in place. The receiver con-sists of the disassembly button, slide stop, andmagazine catch assembly.
|
|
How many steps are in the M9 cycle of operation? |
8 STEPS |
|
what are the 8 steps of m9 cycle of operation? |
firing, extracting, unlocking, ejecting,cocking , chambering, feeding, and locking |
|
safety rules of a weapon |
treat never keep keep |
|
weapon condition 1 on an M9 |
1. Magazine inserted, round inchamber, slide forward, and safety on.
|
|
Condition 2 on an M9 |
Condition 2. Not applicable to the M9 ser- vice pistol.
|
|
Condition 3 on an M9 |
3. Magazine inserted, chamber empty, slide forward, and safety on.
|
|
Weapon condition 4 of an M9
|
Condition 4. Magazine removed, chamber empty, slide forward, and safety on.
|
|
how many commands are used in M9 weapons handling? |
6 |
|
Load
|
Glossary This command is used to take a weaponfrom Condition 4 to Condition 3.
|
|
Glossary “Make Ready”
|
Glossary This command is used to take a weaponfrom Condition 3 to Condition 1.
|
|
Glossary “Fire”
|
Glossary This command is used to engage targets.
|
|
Glossary Unload”
|
Glossary This command is used to take a weaponfrom any condition to Condition 4.
|
|
Glossary “Unload, Show Clear”
|
Glossary This command is used to require a secondindividual to check the weapon to verify thatno ammunition is present before the weaponis put into Condition 4.
|
|
Glossary Stoppage
|
Glossary A stoppage is an unintentional interruption in thecycle of operation; e.g., the slide not moving for-ward completely.
|
|
Glossary Malfunction
|
Glossary A malfunction is a failure of the pistol to fire sat-isfactorily or to perform as designed
|
|
MCRP 3-01B
|
PISTOL MARKSMANSHIP
|