Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
61 Cards in this Set
- Front
- Back
|
How many tie-down points are on a P-3?
|
6- 2 on the nose, 2 under-wing, 2 on the tail.
|
|
|
How is a chain hooked properly into a pad eye?
|
Hook up, turnbuckle up toward aircraft.
|
|
|
What is the proper working load for a TD-1A and TD-1B?
|
10,000lbs with a breaking point of 16,000lbs. If installed incorrectly 6,000.
|
|
|
Who is required when an aircraft is to be backed up into spot?
|
Plane handler, supervisor, QAR or CPO, and 2 spotters.
|
|
|
What is the range of hydraulic pressure for the emergency brake bottle?
|
1900-3000 PSI
|
|
|
What is the range of hydraulic pressure for the brake accumulator?
|
800-3000 PSI
|
|
|
How many people do you need for a plane move?
|
6 - Director, 2 wing walkers, brake rider, tail walker, Buddha driver.
|
|
|
Who is required, as a safety observer, to move an aircraft into the hanger?
|
Maintenance chief.
|
|
|
What is required equipment needed for an aircraft move during daylight hours?
|
Double hearing protection, air horns, Vest, move sheet, Buddha, tow bar.
|
|
|
What is the required equipment needed for an aircraft move at night?
|
Same as day with the addition of wands.
|
|
|
Who is responsible for the aircraft during a move?
|
The qualified director.
|
|
|
In extreme cold weather, are the aircraft parking brakes set?
|
No, brake lines could freeze and rupture.
|
|
|
When is the APU safety switch in the safe position?
|
Aircraft in the hanger or APU removed.
|
|
|
Where is the APU safety switch located?
|
Forward fuselage, port side.
|
|
|
How many people are required to remove/install a tow bar?
|
2
|
|
|
Can an aircraft be moved with the APU in operation?
|
Yes
|
|
|
If the APU is operating who can be the brake rider?
|
Licensed APU operator who is qualified brake rider.
|
|
|
How do you know who is a qualified brake rider?
|
MMP or training jacket.
|
|
|
Where is the list of P-3 stress panels located?
|
NAVAIR 01-75PAA-2-1 WP 09 PG.5
|
|
|
Where do wing walkers position themselves during a move?
|
Just outside and forward of the wingtip with the movement of the wing.
|
|
|
Where does the tail walker position himself or herself during a move?
|
5 feet back from the end of the MAD boom.
|
|
|
Where should the director stand during an aircraft move?
|
Should be able to see wing/tail walkers while communicating with Buddha Driver.
|
|
|
What is the attitude of a move crew?
|
Positive, alert with no skylarking.
|
|
|
When should the sonobouy safety door be closed?
|
Whenever the engines are running.
|
|
|
What should you do if an aircrew is not following your commands?
|
Stop the aircraft; verify you have command by giving the command signal. If your commands are still not being followed, give the shut down engines command, chock the aircraft and discuss the situation with the aircrew.
|
|
|
What does it mean when a pilot flashes his red light 3 times, then it in a circle?
|
Start #3 engine.
|
|
|
How do you attach the ground wire to the aircraft?
|
Wire to ground then to the aircraft.
|
|
|
How do you remove the ground wire from an aircraft?
|
Remove from aircraft then the ground.
|
|
|
How do you check for hot brakes?
|
Approach the tires at a 45 degree angle, palm toward strut using back of hand to feel for heat and look for smoke.
|
|
|
If you have a hot brake, what should you do?
|
Chock the mount that isn't hot, chock the nose wheel and signal the aircrew of the hot brake.
|
|
|
What is required for opening/closing bomb bays?
|
ICS communication and bomb bay checklist.
|
|
|
Can you apply external DC power to a P-3?
|
No
|
|
|
What does MEPP stand for?
|
Mobile Electric Power Plant.
|
|
|
What types of MEPP do we use?
|
3, NC-10, A/M32A-108, and MMG-1A
|
|
|
What is the power provided to the P-3 from MEPP?
|
115VAC, 3 phases, 400 HZ
|
|
|
What do the red vertical lines on the A/M47A-4(Huffer) indicate?
|
Plane of rotation- explosion hazard area. STAY CLEAR!
|
|
|
How many tow tractors do we use?
|
2 - A/S32A-37 (Buddha), A/S32A-30A.
|
|
|
What is the "Buddha" used for?
|
Towing of aircraft. Also can tow S/E but not recommended.
|
|
|
What transmission gear do you tow a P-3 in?
|
F3 or less
|
|
|
What is the maximum number of people allowed in "Buddha" and/or 30A?
|
2
|
|
|
How often do you inspect GSE?
|
Daily and before every use.
|
|
|
Where do you document inspection of support equipment?
|
OPNAV 4790/52 card
|
|
|
Who signs the inspector block on a 52 card?
|
Licensed person who preformed the inspection.
|
|
|
What documentation is used during support equipment inspections?
|
Pre-operational cards 19-600-19-6-1 thru 19-600-284-6-1.
|
|
|
Within how many feet of an operating APU should you wear double hearing protection?
|
75 feet
|
|
|
How many emergency exits does the P-3 have?
|
8 - Pilot's, overhead, 2 over-wings, 3 cut-away, main cabin door.
|
|
|
How can you tell that aircraft radar is in operation?
|
Top and Bottom red strobes, taxi lights are on.
|
|
|
With radar in operation, how far away do you have to be?
|
250 ft.
|
|
|
How far can the Halon fire bottles be away from an aircraft?
|
No more than 50 ft.
|
|
|
What is the number of fire bottles per aircraft?
|
1 bottle per 2 aircraft.
|
|
|
Whose resposibility is tool control?
|
Everyone
|
|
|
How many danger area's are there on a P-3?
|
8 - Air multiplier, APU exhaust, Bomb Bay, Prop Arc, Jet Exhaust, Prop wash, flaps, sonobouy chutes. ( Emergency hydraulic discharge)
|
|
|
How far must fuel operations/ trucks be from operating radar?
|
250 ft.
|
|
|
How far can prop wash reach?
|
1500ft.
|
|
|
How many low point drains are there?
|
7
|
|
|
How many types of contaminants are there for fuel?
|
4
|
|
|
What are the 4 types of contaminants in fuel?
|
Water, Particular matter, Chemical, Microbiological.
|
|
|
What is the required PPE for taking fuel samples?
|
Chemical goggles, Face Shield, Apron, Gloves, sleeves rolled down. (To cover exposed skin)
|
|
|
Where do you look for contaminants in a fuel sample?
|
Directly under the swirling vortex.
|
|
|
Where do you record the findings from your fuel samples?
|
In the ADB in maintenance control.
|
|
|
How long in a set of fuel samples good for?
|
24 hours.
|
