• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/9

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

9 Cards in this Set

  • Front
  • Back
P-3C Hydraulics (Safety):

Extreme caution shall be taken when around hydraulic systems under _______ to avoid accidental ________ of fluid under the skin. Fluid injection can result in serious injury; get immediate medical attention.
Pressure

Injection
P-3C Hydraulics (Safety):

The hydraulic systems on a P-3C are cooled through ____ _______ when hot hydraulic fluid passes through lines in the #__ and #__ fuel tanks. A minimum of _____ lbs of fuel is required to necessitate cooling.
Heat Transfer
2 & 3
1000
P-3C Hydraulics:

Hydraulic theory basics (Ref a). Pascal's law states the _______ exerted anywhere upon an enclosed ______ is transmitted undiminished, in ___ directions, to the interior of the _________.
Pressure
Liquid
All
Container
P-3C Hydraulics:

The P3C has three _______ (___) driven hydraulic pumps and one ________ (___) driven pump.
Electrically (A/C)
Electrically (D/C)
P-3C Hydraulics:

As stated in Pascal’s law, when pressure is exerted on an enclosed liquid force it is evenly ________ to all _________ and or valves throughout the hydraulic system through hydraulic _____.
Distributed
Actuators
Lines
P-3C Hydraulics:

_______ direct the flow of fluid to the various actuating units. Additionally each _____ is considered a part of its related actuating system.
Valves
P-3C Hydraulics:

Each hydraulic system has a fluid _______ located in the hydraulic service center area. System #1 ______has a total capacity of __.__ gallons. System #2 reservoir has a total capacity of __ gallon.
Reservoir
Reservoir
5.6
Reservoir
1
P-3C Hydraulics:

The _______ system is designed so the pilot has a normal feel of control forces when hydraulic pressure is available to the ______cylinders. Hydraulic flight control _______ operated by both hydraulic systems are incorporated in each of the three surface control systems.
Booster(s)
P-3C Hydraulics:

________ units transform hydraulic fluid pressure into mechanical force, to perform work.
Actuator