Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
What type of instruments are used in the cold chemical area Laboratory? |
Turbidity meter, pH meter titrator, analytical balance conductivity meter |
|
Where does the hot cells in glove boxes drain to? |
Lab drain tank TK-235 |
|
Where does radio hood and bent stinks drain to? |
Lab collection tank 236 or 237 |
|
Used to pre-treat samples to precipitate out |
Ammonium molybdophosphate (AMP) |
|
In order to reduce overall dose rate (Beta-Gamma) thereby, reducing extremity and whole body dose rates |
Cesium |
|
Is used to assure that internal cavities within the windows are not filled with ambient air leads to condensation |
Argon purge system |
|
What can cause the windows to stain in the hot cell |
Condensation |
|
What can cause the windows in the hot cell to rupture or fracture |
Over pressurization |
|
What protects the glass from over pressurization? |
A second control valve set at 4 inches of water which well send the excess argon pressure to that give globe box exhaust air header |
|
To catch liquids discharged to the cheek. Drains to tk235 |
Catch cup |
|
For flushing and cleaning the samplers in that hot cell |
DI water |
|
Contains 9 isolok samples. Contains alpha sorption, filter feed |
Hot cell 1 |
|
Contains 9 isolok samplers. Caustic wash tank, solvent hold and barium decay tank |
Hot cell 2 |
|
Initial sample & instrument prep. Hot plate, ph meter/titrator, oven, and analytical balance |
Hot cell 3 |
|
Access to transfer drawers & STS |
Hot cell 4 |
|
When it is determined that a sample is to be taken the control room will initiate the sample routine from the |
BPCS basic process control system |
|
Contains isolok samplers coming from the tanks associated with alpha finishing system. Contains almost all cesium removal |
Glove box 8 &9 |
|
How many units are in place in each of the analytical lab |
4 |