Related Essays

  • Unit Standard 6852 Unit 2 Different Communication Mediums

    Unit Standard 6852 Assessment Task 1: Throughout history, cable types have changed quite a lot, whether is be for reasons based on speed - or security. Th...

  • Outline Portfolio Draft: Time Warner Cable

    There was a required four week training designed for technicians to understand the fundamentals of RF theory in cable industry as well as hands on training o...

  • Nt1310 Network Networks

    The shield’s purpose is to minimise electrical and radio frequency interference. These days, coax cables are often used or associate with television and some...

  • Network : The Network Of A Wan Network

    The ethernet switch connects to the cross-patch panel, this panel connects all the RJ-45 (Registered Jack 45) outlets in each office. The horizontal cable ru...

  • Nt1310 Unit 1 Research Paper

    ITM 301 Lab & Assignment 2 Deqa Yusuf Student #:500566949 Part A: Both CAT5 and CAT5e are UTP cables but the difference between these 2 cables is the qualit...

  • Physical Network Design: Network Phenomenon

    The computer lab uses a 72 port switch because of the number of hosts connected to it. Patch panels are also used for each closet and server room. More speci...

  • Usf Infrastructure Research Paper

    Paper 1 – USF Infrastructure The video describes the core of the University of South Florida infrastructure that is two redundant devices that provides 100G...

  • Nt1310 Unit 5 Communication Paper

    I will gather quantitative data based on the following questions: What​ ​is​ ​each​ ​type​ ​of​ ​CAT​ ​cable​ ​best​ ​suited​ ​for? How​ ​can​ ​replacing​ ​o...

  • Stand Frames: Netting Placement And Stand

    To reel in the cable when the device is being retracted, or to hold tension the cables in order to hold the shape of the netting, the Roll Out Stand has a sy...

  • Hardware And Software Components Analysis

    This has now recently started being used in homes, creating broadband services. This cable has an inner conductor surrounded by a tubular insulating layer, s...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/15

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

15 Cards in this Set

  • Front
  • Back
Describe the physical aspects of a twisted pair cable.
It is copper wires insulated into pairs.
What is the difference between PVC and plenum cable.
PVC or plenum plastic uses insulation to surround each wire.

Plenum cable is fire resistant and non toxic and must be used when.
Define RJ-45 cat 5, 5e, and 6 specifications along with RJ-11.
Look at the pic
Look at the pic
Describe how coaxial cabling ******* ****
The mesh grounds the media so you want insulators on both sides.
The mesh grounds the media so you want insulators on both sides.
What is the difference between straight through and crossover twisted pair?
Straight through enables you to simply connect pin 2 to pin 2 etc..
Here are the pin-outs for crimping a UTP cable
look at the ******* image
look at the ******* image
What is a punchdown tool?
It is a tool used to "punch down" Ethernet wires into a patch panel. It also automatically cuts off excess wire.
It is a tool used to "punch down" Ethernet wires into a patch panel. It also automatically cuts off excess wire.
What would you use to change the location of wires entering your building from a WAN?
You would use a demarc extention, as it is the demarc that defines the meeting point between the WAN and the building.
What is the difference between IDF's and MDF's?
IDF stands for intermediate distribution frame and MDF stands for Main distribution frame.
What is a smart jack?
It is a special loop-back plug installed at the demarc to enable troubleshooting
It is a special loop-back plug installed at the demarc to enable troubleshooting
What should you use to connect rJ 45 connectors to each end?
Crimping tool.
What pins are used to transmit data on a 100base T network.
Pin 1 and 2
Pin 1 and 2
You want to attach wires to a 66 or 110 wire punch-down block. what do you do and what do you use.
You us e a punchdown tool with a straight blade for a 66 block and a punchdown tool with a notched blade for a 110 block. Be sure that the cut side of the blade is pointed towards the wire end.
What is a cable stripper used for?
removing the plastic coating to expose individual wires.
removing the plastic coating to expose individual wires.
view a video on using
a 110 block and a 66 block