Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
273 Cards in this Set
- Front
- Back
There are over how many supply items in the Department of Denfense Supply System? (2-5) |
Four million |
|
What is a two position numeric-alpha code that identifies a stock numbered item with the Navy inventory manager of the psecific category of material in which the itme is included, and also indicates whether the material is managed in an NSA sotres account, an APA stores account or a non stores accounts? (2-5) |
Cognizance sysbol |
|
What items are items for which integrated military supply management responsibility is vested in the Defenses Logistics Agency (DLA)? (2-6) |
Navy Retail Office (NRO) |
|
Items managed by a single defense supply center to DLA are assigned to a single NRO selected by the what? (2-6) |
Naval Supply Systems Command |
|
What is FSC group 25? (2-7) |
Vehicle Equipment except tires & tubes |
|
What is FSC group 40? (2-8) |
Rope, cable, chain, & fittings
|
|
What is FSC group 62? (2-8) |
Light fixtures |
|
What is FSC group 99? (2-9) |
Miscellaneous |
|
What are the 1st & 2nd positions of an NSN? (2-11) |
Group |
|
Part II Section B of the COSAL is maintained in what sequence? (2-41) |
Circuit Symbol Number (CSN) |
|
What part & section of the COSAL is published in Microfiche format? (2-41) |
Part II, Section B
|
|
What is contained in COSAL Part II, Section C? (2-42) |
AEL's |
|
What does an "A" or "Zero" indicate in the first digit of an AEL? (2-42) |
Ordnance Equipage |
|
What does a "B" or "1" indicate in the first position of an AEL? (2-42) |
Space / system related
|
|
What does a "C" or "2" indicate in the first position of an AEL? (2-42) |
Miscellaneous equipage |
|
What does a "D" or "3" indicate in the first position of an AEL? (2-42) |
Automotive construction
|
|
What does an "E" or "4" indicate in the first digit of an AEL? (2-42) |
Flag Allowance Equipage |
|
What does a "F" or "5" indicate in the first position of an AEL? (2-42) |
Special project office |
|
What does a "G" or "6" indicate in the first digit of an AEL? (2-42) |
Nuclear Reactor Plant Equipage
|
|
What does a "H" or "7" indicate in the first position of an AEL? (2-42) |
Portable Electronic Equipage
|
|
What does an "I" or "8" indicate in the first digit of an AEL? (2-42) |
Trident Equipage
|
|
What does a "J" or "9" indicate in the first position of an AEL? (2-42) |
Nuclear Weapons Equipage
|
|
What publication are Allowance Note Codes found in? (2-43) |
NAVICPMECHINST 4441.170 |
|
Unit of Issues are contained in what appendix of the P-485? (2-43) |
19
|
|
What is contained in COSAL Part III, Section B? (2-47) |
OSI |
|
What is contained in COSAL Part III, Section CF? (2-47) |
MAMs - Maintenance Assistance Moduless |
|
What part and section of the COSAL contains the General Use Consumables List (GUCL)? (2-51) |
Part III, Section E |
|
Subsection 1 of the GUCL is furnished in what sequence? (2-51) |
NIIN
|
|
What subsection of the GUCL is a statistical summary of the total number of line items by material category, separated into hazardous and non-hazardous? (2-53) |
3 |
|
The format and use of the nuclear weapons COSAL is contained in what PUB? (2-55) |
Special Weapons Ordnance Pub (SWOP 100-1A) |
|
What does AVCAL stand for? (2-60) |
Aviation Consolidated Allowance List |
|
Who maintains the ship's copy of the OPNAV Form 4790/CK? (2-66) |
Supply Officer
|
|
In what sequence is the ship's copy of the OPNAV Form 4790/CK maintained? (2-66) |
COSAL maintenance action number sequence
|
|
What is the form number for an Allowance Change Request(ACR)? (2-69) |
NAVSUP Form 1220-2
|
|
A NAVSUP 1220-2 is submitted to who? (2-69) |
To the cognizant ACR Processing Control Point via the Type Commander |
|
What is the form number for the Fleet COSAL Feedback Report? |
NAVSUP Form 1371 |
|
An NSN consists of how many digits? (2-11) |
13
|
|
What does NCB code "00" indicate? (2-15) |
United States |
|
What does NCB code "21" indicate? (2-15) |
Canada
|
|
What are the 3rd & 4th positions of an NSN? (2-11) |
Class
|
|
What list provides current data required for requisitioning purposes? (2-18) |
Management Data List
|
|
What list reflects the range and depth of materials carried by CLF ships?
|
Load Lists
|
|
What countries use the Federal Catalog System?
|
North Atlantic Treaty Organization Countries
|
|
What document identifier is used for ordering tech manuals?
|
A04 / A0D
|
|
Items assigned to the ICP for inventory management are selected by who?
|
NAVSUP
|
|
List four NICN codes most commonly used?
|
LD (Directives), LP (Pubs), LF (Forms), LL (All others)
|
|
What system has been developed as a common language of supply?
|
Federal Catalog System
|
|
What appendix of the P-485 contains SMIC codes?
|
14
|
|
What publication contains the MLN, ML-C, MCRL, & MRIL?
|
FEDLOG
|
|
What is entered into the first four digits of an NICN (LL coded) when the FSC is not known?
|
0000
|
|
Who administers the Federal Catalog System?
|
DLA
|
|
What position of an NSN is the NCB code?
|
5 & 6
|
|
By whose direction does DLA administer the Federal Catalog System?
|
Assistant Secretary of Defense (Installations & Logistics)
|
|
Who assigns NSNs to material?
|
Defense Logistics Service Center (DLSC), Battle Creek, Michigan
|
|
What is the NAVSUP P-600?
|
NLL on CD-ROM
|
|
What does CAGE stand for?
|
Commercial and Government Entity
|
|
How many parts make up the MRIL?
|
2; (MRIL response for NSN/NICN) and (MRIL response for Shipping codes)
|
|
Who manages all Navy subscriptions for FEDLOG?
|
Naval Publications & Forms Directorate (NPFD) of NAVICP PHIL
|
|
What is FSC group 42?
|
Fire fighting & rescue
|
|
Are NAVICP MECH and NAVICP PHIL managed DLR's authorized to be stocked as SIM/DBI material?
|
No
|
|
What is FSC group 51?
|
Hand tools
|
|
NAVICP MECH managed DLR items are identified by what MCC codes?
|
H, E, X
|
|
NAVICP MECH managed DLR items are identified by what cogs?
|
7E, 7G, 7H, 7Z
|
|
NAVICP PHIL managed DLR items are identified by what cogs?
|
0Q, 0R, 1R, 4Z, 6K, 6R, 7R, 8N
|
|
How are ACR's for demand based quantity increases/decreases of NAVICP MECH managed DLR items submitted?
|
By message
|
|
What two organizations are jointly responsible for the development and update of the Seabee COSAL?
|
NAVICP MECH & Civil Engineer Support Office (CESO)
|
|
Seabee COSAL allowances are computed to allow the unit to be self-sufficient for how many days and for how many construction hours?
|
90 days / 1800 hrs
|
|
What does FILL stand for?
|
Fleet Issue Load List
|
|
What is the purpose of the FILL (Fleet Issue Load List)?
|
To project the material requirements for resupply of all Atlantic and Pacific deployed forces.
|
|
The FILL is computed to satisfy what percent of the forecasted demands of deployed fleets and for what period of time?
|
85% for 90 days
|
|
What is the publication number of the CARGO?
|
NAVSUP P-4998
|
|
How many times a year is the CARGO issued?
|
3
|
|
Who is the CARGO issued by?
|
NAVICP MECH
|
|
What publication contains the Ship's Store Afloat Requisitioning and Load List?
|
CARGO (NAVSUP P-4998)
|
|
What does TARSLL stand for?
|
Tender and Repair Ship Load List
|
|
The TARSLL is prepared by who?
|
NAVICP MECH
|
|
Under a Tender Load List (TLL) for 2S COG? X1 SMIC reactor plant components additions and deletions will be made only by who's direction?
|
NAVSEA 08
|
|
How often will Tenders authorized to carry 2S COG / X1 SMIC components conduct a physical inventory?
|
Annually
|
|
The Federal Standard 183b sets forth guidelines for continuous identification markings of what type of material / products?
|
Iron & steel
|
|
What is defined as a CD-ROM, which contains every APL/AEL developed and published by the Navy, which has shown usage within the previous 3 years?
|
General Distribution APL/AEL Bank (GDAPL)
|
|
Who prepares the initial Ship Armament Installation List (SAIL)?
|
NAVSEASYSCOM
|
|
What is the OPNAVINST 4790.4?
|
Ship's 3M Manual, Vol. 2
|
|
Who is responsible for initiating reports and COSAL updates installations, modifications, and removals are accomplished between overhauls?
|
The ship
|
|
The Ship's Equipment Configuration Accounting System (SECAS) reports should be reviewed at what frequency?
|
Upon receipt and every 6 months thereafter
|
|
What does SECAS stand for?
|
Ship's Equipment Configuration Accounting System
|
|
The COSAL is generated from the ship's configuration status that is located where?
|
WSF NAVICP MECH
|
|
What is the title of the overall program which provides the data required for effective management support equipment at the organizational and intermediate levels of aircraft maintenance?
|
Aviation Maintenance Material Readiness List (AMMRL)
|
|
What lists the repair parts accessories, and other material which, based on anticipated flight hours will be required to support aircraft maintenance and operations for a 90-day period?
|
Allowance Requirement Registers (ARR)
|
|
What form is the Ship's Configuration Change Form?
|
OPNAV Form 4790/CK
|
|
What does MALS stand for?
|
Marine Aviation Logistics Squadrons
|
|
How are AELs identified?
|
A nine-digit number proceeded by either an alpha or numeric character and a dash
|
|
What is contained in COSAL Part II, Section A?
|
APLs
|
|
How is COSAL Part I, Index Section E sequenced?
|
AILSIN / FGC to APL / AEL
|
|
What identifies the latest known test equipment required to perform preventative and corrective maintenance at the organizational and intermediate levels on a total shipboard basis?
|
Ship Portable Electrical / Electronic Test Equipment Requirements List (SPETERL)
|
|
How many subsections make up the GUCL?
|
3
|
|
Who publishes the HMEO&E COSAL except for Part III Section F?
|
NAVICP MECH
|
|
What provides both technical and supply information which makes it an Integrated Logistics Support document?
|
COSAL
|
|
Is the COSAL a publication, form, or document?
|
Document
|
|
Pre commissioning supply assistance will be provided by personnel from where?
|
Fitting Out & Supply Support Assistance Center (FOSSAC) Norfolk, Va.
|
|
What list itemizes and quantifies each ship's material requirements?
|
Allowance Lists
|
|
Who publishes the catalog of Navy ammo stock and in what format?
|
NAVICP MECH in microfiche format
|
|
How many sections are there in the Afloat Shopping Guide and how are they broken down?
|
5 by FSC
|
|
The SOAPL is listed in what sequence?
|
Numerical by Identification Number
|
|
What is contained in Part III Section F of the COSAL?
|
Forms & Pubs
|
|
In the SOAPL and sections A & B next to the page number, there is a code which indicated the type of equipment / system to which the page applies. What code represents "Electronic"?
|
E
|
|
What list projects the material requirements for resupply support of all deployed forces of the Atlantic and Pacific Fleets?
|
Fleet Issue Load List (FILL)
|
|
What does FLSIP stand for?
|
Fleet Logistic Support Improvement Program
|
|
In the SOAPL and Sections A & B next to the page number, there is a code which indicates the type of equipment / system to which the page applies. What code represents Ordnance?
|
Z
|
|
In the SOAPL and Sections A & B next to the page number, there is a code which indicates the type of equipment / system to which the page applies. What code represents NAVICP PHIL managed?
|
A
|
|
Part I, Section A of the index is sequenced how?
|
Alphabetically by APL / AEL / ACL noun name
|
|
COSAL Index Section B is arranged in what sequence?
|
Alphabetically by service application
|
|
As set forth by the CNO, FILL are computed to satisfy what percent of the forecasted demands of the deployed fleet and for what time period?
|
85% for a 90 day period
|
|
What list is prepared by NAVICP MECH and reflects the material authorized to be stocked by tenders is support of their assigned missions?
|
Tender and Repair Ship Load List (TARSLL)
|
|
COSAL Index, Section C is arranged in what sequence?
|
APL /AEL to EIC / AILSIN
|
|
Commercial catalogs and instruction books or pamphlets are issued by the manufacturer and contain information, which is of value in the preparation of procurement documents for what type of equipment?
|
Nonstandard equipment
|
|
What does AILSIN stand for?
|
Automated Integrated Language System Identification Number
|
|
COSAL Index, Section D is arranged in what sequence?
|
EIC to APL / AEL
|
|
COSAL Index, Part I Section E is arranged in what sequence?
|
AILSIN / FGC to APL / AEL
|
|
APLs in COSAL Part II, Section A are arranged in what sequence?
|
Identification Number
|
|
What document is tailored to an individual ship which lists the equipment / components required for the ship to operate its reactor plant safely and reliably?
|
Q - COSAL
|
|
What identifies the latest known test equipment required to perform preventative and corrective maintenance at the organizational and intermediate levels on a total shipboard basis?
|
The SPETERL
|
|
APL numbers for electronic equipment have how many digits?
|
" 8 "
|
|
All tubular products ¼" or more in outside diameter shall be marked in constant recurring symbols at what intervals?
|
Not greater than 3 feet
|
|
What cylinder color identifies flammable materials?
|
Yellow
|
|
Toxic and poisonous materials are identified by what cylinder color?
|
Brown
|
|
What color identifies all materials provided in compressed gas cylinders exclusively for use in fire protection?
|
Red
|
|
What color gas cylinder represents industrial?
|
Buff
|
|
Anesthetics and all liquid chemicals and compounds hazardous to life and property but not normally productive of dangerous quantities of fumes or vapors are contained in what color cylinder?
|
Blue
|
|
All materials, not dangerous in themselves, which are asphyxiating in confined areas or which are generally handled in a dangerous physical state of pressure or temperature are contained in what color cylinder?
|
Gray
|
|
A black cylinder identifies what type of material?
|
Combination of oxygen & other gases
|
|
An orange cylinder contains what type of gas?
|
Refrigerants
|
|
What lists are developed and maintained by the Defense Logistics Service Center (DLSC) to provide approved national item description and related data required to identify or select items of supply?
|
Identification Lists (ILs)
|
|
What part of the HMEO&E COSAL contains the SOAPL?
|
Part I
|
|
What form is used to report COSAL errors?
|
OPNAV Form 4790/CK
|
|
What provides the basic management data necessary for preparing requisitions and an integrated historical record of deleted and superceded NIINs, with appropriate codes to indicate disposition action?
|
Individual Material Readiness List (IMRL)
|
|
What is defined as a consolidated allowance list specifying end items and computed authorized quantities of support equipment required for maintaining the material readiness of an aircraft maintenance activity?
|
FEDLOG
|
|
What is the National Codification Bureau (NCB) Code for the United Kingdom?
|
99
|
|
Once a ship's installed equipment has been validated, reported, and reflected in an updated COSAL, who is responsible for ensuring that any subsequent equipment installations, removals, or modifications are reported to the ICP and Type Commander, and that the ship's COSAL is revised accordingly?
|
Ship's Supply Officer
|
|
What is Chapter 2 of the P-485?
|
Material Identification
|
|
What reference is designed to assist fleet personnel in identifying the NSN for items that are frequently requested by ships?
|
Afloat Shopping Guide (NAVSUP P-4440)
|
|
The HMEO&E COSAL consists of an introduction and how many parts?
|
3
|
|
Who's responsibility is it to recognize and promptly request necessary allowance list changes, if such changes have not been previously directed or authorized by the cognizant Type Commander, or other appropriate authority?
|
The ship
|
|
NAVICP MECH managed DLR items are identified in the MRIL by what Material Control Codes?
|
E, H, or X
|
|
The COSAL is generated from the ship's configuration status that is stored at what activity?
|
Weapon Systems File (WSF) at NAVICP MECH
|
|
What is the prescribed document for requesting item additions / deletions or quantity increases / decreases in all published allowance lists?
|
NAVSUP Form 1220-2 (Allowance Change Request)
|
|
The AVCAL is developed and published by what activity?
|
Naval Inventory Point, Philadelphia
|
|
What program provides the data required for effective management of support equipment at the organizational and intermediate levels of aircraft maintenance?
|
Aviation Maintenance Material Readiness List (AMMRL)
|
|
How many digits do APLs for HMEO&E equipment consist of?
|
9
|
|
What type of COSAL is defined as a document tailored to an individual ship which lists the equipment / components required for the ship to operate its reactor plant safely and reliably?
|
Reactor plant COSAL, or Q COSAL
|
|
What is defined as a numerical sequence listing, by identification number, of all APLs / AELs / ACLs that apply to the ship?
|
SOAPL
|
|
The SPETERL identifies the latest known test equipment required to perform preventative and corrective maintenance at what levels?
|
Organizational & intermediate levels
|
|
What activity, designated by the CNO, is responsible for assembly and on board delivery of allowance list material other than that which may have been placed on board at the building or conversion shipyard?
|
The Fitting Out Activity (FOA)
|
|
What Allowance Note Code is assigned to MAMs?
|
"N"
|
|
What do cognizant ICPs use to prepare the initial stock, custody, and/or locator records which a ship will require for proper inventory management of its authorized supply support materials?
|
Allowance lists
|
|
What is contained in the Hazardous Material Control and Management Program (HMC&M) CD-ROM?
|
Hazardous Material Information System (HMIS) & the Ships Hazardous Material List (SHML)
|
|
What serves as the major merchandizing instrument of the Federal Supply Service (FSS) Stock Program?
|
The GSA Supply Catalog Series
|
|
What is the National Codification Bureau (NCB) Code for NATO standard items?
|
11
|
|
What is the National Codification Bureau (NCB) Code for France?
|
14
|
|
What is the Federal Supply Classification (FSC) group for brushes, paints, sealers, and adhesives?
|
80
|
|
What is the Federal Supply Classification (FSC) group for photographic equipment?
|
67
|
|
What is the Federal Supply Classification (FSC) group for fuels, lubricants, oils, and waxes?
|
91
|
|
What is defined as a two position alpha or alphanumeric code that is assigned by the Commander, Naval Supply Systems Command to certain NSN items which require source of quality control, technical design or configuration control and/or special controls for procurement, receipt, inspection, test, storage, and/or issue?
|
Special Material Identification Code (SMIC)
|
|
What NCB codes identify the United States?
|
00 & 01
|
|
How are items of material that are not included in the Federal Catalog System, but which are stocked or monitored in the Navy Supply System identified?
|
Navy item control number (NICN)
|
|
How are the first four digits of a LICN determined?
|
FSC of similar NSN items
|
|
What system was developed as a plan for classifying, indexing, and numbering Navy technical manuals to encourage standardization and modernization?
|
Technical Manual Identification Numbering System (TMIS)
|
|
What is the National Codification Bureau (NCB) code for Canada?
|
21
|
|
What is the National Codification Bureau (NCB) code for Japan?
|
30
|
|
What activity manages all Navy subscriptions for FEDLOG, including requisition processing, payment matters, renewal notifications, customer inquiries and problems, and future enhancements to the FEDLOG system?
|
The Naval Publications and Forms Directorate (NPFD) of NAVICP PHIL
|
|
What interactive query system uses the following types of search criteria: Part # ; Commercial & Government Entity (CAGE); NIIN; NSN; Permanent System Control Number (PSCN); Supplier Name; Item Name; NICN; Engine Number; and MRIL Shipping Code?
|
FEDLOG
|
|
Who publishes Identification Lists (ILs) and in what format?
|
DLSC on FEDLOG CD-ROM
|
|
Who may initiate ASI tape processing on board the ship?
|
3M Coordinator
|
|
How often are ASI tapes received aboard ship?
|
Monthly
|
|
What gives the ship authorization to obligate navsea funds?
|
Cover letter included with ASI tape
|
|
Information on transaction ledgers can be found in what appendix of P-485?
|
25
|
|
Who acts as a clearinghouse for all configuration data updates generated by activities external to the ship as well as coordinates and controls updates to the SEF and WSF which have been initiated by the ship?
|
(CDM) Configuration Data Manager
|
|
What is COSAL type BH?
|
Boat haven
|
|
What is COSAL type Q-COSAL?
|
Nuclear reactor
|
|
What is COSAL type NW?
|
Nuclear weapons
|
|
What is COSAL type MAM?
|
Maintenance Assistance Modules
|
|
What does SNAP stand for?
|
Shipboard Non Tactical ADP Program
|
|
What is the purpose of Military and Federal specifications for procurement of materials?
|
To clearly and accurately describe the essential technical requirements for material and services
|
|
Are ACR's required for the addition of demand based repair parts other than DLR items?
|
No, unless directed by TYCOM
|
|
Who has sole responsibility for the development, publication and biennial update of the (NCF) Naval Construction Force (TOA) Table of Allowance?
|
(CESO) Civil Engineer Support Office
|
|
What part and section of COSAL is Alternate number cross reference to NIIN / NICN?
|
Part III section D
|
|
A NICN to NIIN cross reference list is published how often?
|
Monthly
|
|
A NICN to NIIN cross reference list is published in what format?
|
FEDLOG, CD-ROM
|
|
A NICN to NIIN cross reference list is published by who?
|
DLSC
|
|
Name two of the five material categories not listed on FEDLOG?
|
(1)Publications, (2)Ship store cargo
(3)special weapons 0A and 8A cog (4)Subsistence (cargo), (5)Training equipment |
|
True/False:
A cog symbol is a 4 position numeric-alpha code that identifies a stock number item with the Navy inventory manager? |
False:
2 position numeric-alpha code |
|
Name two of the five material categories not listed on FEDLOG?
|
Publications, Ship store cargo, special weapons 0A and 8A cog, Subsistence (cargo), Training equipment
|
|
What items (material) are exempt from the FSC, name one?
|
(1)Items procured for one time basis for immediate use
(2)Items procured locally (3)Printed forms, (4)charts (5)manuals, (6)books, (7)Items procured with non appropriated funds |
|
T/F: A cog symbol is a two position alpha-numeric code that identifies a stock number item with the Navy inventory manager?
|
False, Numeric-alpha
|
|
What items (material) are exempt from the FSC, name one?
|
Items procured for one time basis for immediate use, Items procured locally, Printed forms, charts, manuals, books, Items procured with non appropriated funds.
|
|
What appendix of the P-485 contains MCC codes?
|
9F (MCC)
|
|
Who assigns NSN's to commercial and military equipment tech manuals for Sea Bee's?
|
(CESO) Civil Engineering Support Office
|
|
When will the StoreRoom Item COSAL part III section A be superseded by the Integrated Stock List?
|
After completing an ILO.
|
|
What appendix of the P-485 contains Shelf life codes?
|
9K (Shelf life)
|
|
Part III section A of the COSAL consists of what?
|
Part III section A of the COSAL consists of what?
|
|
Part III section A of the COSAL consists of what?
|
SNSL of StoreRoom Items (SRI) or Integrated Stock List (ISL)
|
|
What part of the COSAL are ships value lists?
|
Part III, Filed between sections CF and D
|
|
What series are the Nuclear Weapons COSAL?
|
95000
|
|
What GSA form is submitted as a (FSS) Federal Supply Service publication mailing list application?
|
GSA form 457
|
|
What form is used when ordering perminant NICN items?
|
1348-6 (for cage purpose)
|
|
Is the COG considered to be part of the NSN?
|
NO
|
|
MALS (Marine Aviation Logistics Squadrons) are provided with COSALs to support what systems and what control units?
|
Aviation ordnance, Air tactical
|
|
What type of procedure is used to manage DLR's?
|
Fixed allowance procedures
|
|
What subsection of GUCL is sequenced by shipboard DEPT?
|
"2"
|
|
Installation of new equipment. If a new component or equipment item is not already included in an existing APL/ AEL alteration activity will prepare allowance appendix pages stamped with what words?
|
Appendix Page
|
|
What are the color code marking on gas cylinders for the following gasses? |
(1)Acetylene: Yellow |
|
What encompasses the naming, description, classification, and numbering of all items carried under centralized inventory control by the Department of Defense and the civil agencies of the Federal Government as the publication of related identification data? (2-7) |
Federal Catalog System |
|
What administers the Federal Catalog System under the direction of the Assistant Secretary of Defense? (2-7) |
Defense Logistics Agency (DLA) |
|
What is designed to permit the classification of all items of supply used by the Federal Government? (2-7) |
Federal Supply Classification (FSC) |
|
What is a 13 digit stock number assigned by the Defense Logistics Information Service (DLIS) (formerly (DLSC), Battle Creek, Michigan, to identify an item of material in the supply distribution system of the United States? (2-11) |
National Stock Number (NSN) |
|
What is a two position alpha or alphanumeric code that is assigned by the Commander, Naval Supply Systems Command to certain NSN items which require source of quality control, technical design or configuration control and/or special controls for procurement, receipts, inspection, test, storage, and/or issue? (2-11) |
Special Material Identification Code (SMIC) |
|
Items of material that are not included in the Federal Catalog System, but which are stocked or monitored in the Navy Supply System, are identified by what? (2-11) |
Navy Item Control Numbers (NICNs) |
|
What is a plan for classifying, indexing, and numbering Navy technical manuals which has been developed to encourage standardization and modernization? (2-13) |
Technical Manual Identification Numbering System (TMINS) |
|
What (formerly called local stock numbers) may be assigned to shipboard stocked consumable items which are not identified by an NSN, a NATO stock number, or another type of NICN? (2-14) |
Local Item Control Number (LICN) |
|
What NATO Standardization Agreement, which has been ratified by 15 NATO nations including the United States, provides for the adoption of the United States item identification system as the bases for the NATO item identification system within the armed forces of signatory countries? (2-14) |
3151 |
|
What is am interim number to permit item entry into the Construction Battalion Center (CBC)/Civil Engineer Support Office (CESO) systems pending the assignment of a National Stock Number (NSN) by the Defense Logistics Information Service (DLIS) (formerly DLSC)? (2-16) |
Temporary Control Number (TCN) |
|
What is assigned to items which will not be given an NSN? (2-17) |
Permanent Control Number (PCN) |
|
What provide current data required for requisitioning purposes; e.g. latest NSN, unit of issue, price, cognizant inventory manager, control codes, etc? (2-18) |
Management Data Lists |
|
What contain the items authorized; e.g., repair parts and consumables, as well as the recommended on hand quantities. It also provides descriptive data, which associates material requirements to an NSN? (2-18) |
Allowance Lists |
|
What reflect the range and depth of material carried by Combat Logistic Force (CLF) ships (including tenders) or bases assigned to support fleet units? (2-18) |
Load Lists |
|
What includes the basic management data necessary for preparing requisitions. It also includes an integrated historical record of deleted and superseded NIINs, with appropriate codes to indicate disposition action? (2-18) |
FEDLOG |
|
What manages all Navy subscription for FEDLOG, including requisition processing, payment matters, renewal notifications, customer inquiries and problems, and future enhancements to the FEDLOG system? (2-20) |
Document Automation and Production Service (DAPS-PHIL) |
|
What contain selected Navy managed items which, when unserviceable and not locally repairable, are required to be turned in to a Designated Overhaul Point (DOP) for repair and return to system stock (see pars. 8320-8325)? (2-21) |
Master Repairable Item List (MRIL) |
|
What are developed and maintained by the Defense Logistics Information Service (DLIS) to provide approved national item description and related data required to identify or select items of supply? (2-22) |
Identification Lists (ILS) |
|
What is a consolidated cross reference lists of all NSN items of supply in the Federal Catalog System? (2-24) |
Consolidated Master Cross Reference List (MCRL) |
|
What Series serve as the major merchandising instrument of the Federal Supply Service (FSS) Stock Program? (2-25) |
GSA Supply Catalog |
|
What provides U.S. Navy activities, afloat and ashore, with a complete listing of non-nuclear ammunition components and related material? (2-28) |
Catalog of Navy Ammunition Stock (TW010-AA-ORD-010) |
|
What is designed to assist Fleet personnel in identifying the National Stock Number (NSN) for items that are frequently requested by ships? (2-28) |
Afloat Shopping Guide (NAVSUP P-4440) |
|
What provides both technical and supply information which makes it an Integrated Logistics Support (ILS) document? (2-30) |
COSAL |
|
What is a document tailored to an individual ship which lists the equipment/components required for the ship to operate its reactor plant safely and reliably? (2-55) |
Reactor plant COSAL, or "Q" COSAL |
|
What identifies the latest known test equipment required to perform preventive and corrective maintenance at the organizational and intermediate levels on a total shipboard basis? (2-57) |
SPETERL |
|
The SPETERL is prepared by what? (2-57) |
NWS Earle |
|
What lists the items and quantities of aeronautical material authorized to be stocked by CV/CVN/LHA/LHD ship types to support the maintenance and operations of embarked aircraft? (2-60) |
AVCAL |
|
The AVCAL is comprised of the how many basic parts? (2-60) |
Eight |
|
What list the repair parts, accessories, and other materials which, based on anticipated flight hours, will be required to support aircraft maintenance and operations for a 90 day period? (2-62) |
Allowance Requirement Registers (ARRs) |
|
What list the shop equipment and maintenance materials required for performance of specific missions? (2-62) |
Tables of Basic Allowances (TBAs) |
|
What is the title of the overall program which provides the data required for effective management of support equipment at the organizational and intermediate levels of aircraft maintenance? (2-64) |
Aviation Maintenance Material Readiness List (AMMRL) |
|
What is a consolidated allowance list specifying end items and computed authorized quantities of support equipment required for maintaining the material readiness of an aircraft maintenance activity? (2-64) |
Individual Material Readiness List (IMRL) |
|
What is the prescribed document for requesting item additions/deletions of quantity increases/decreases in all published allowance lists (an item may be an equipment/component, repair part or equipage? (2-69) |
NAVSUP Form 1220-2 |
|
What is the primary authorized allowance document of the NCF? (2-75) |
Table of Allowance (TOA) |
|
The COSAL is a document prepared for a unit/activity listing the equipment or components required to perform its operational assignment, and the material support for the repair and upkeep of that equipment. The allowance is compared to allow the unit to be self sufficient for how many days or how many construction hours? (2-75) |
90/1800 |
|
What system is the tool used by the Navy to provide logistic support to the Civil Engineer Support Plans? (2-76) |
Advance Base Functional Component (ABFC) System |
|
What projects the material requirements for resupply support of all deploy forces of the Atlantic and Pacific Fleets? (2-77) |
Fleet Issue Load List (FILL) |
|
As set forth by CNO, FILL is computed to satisfy what percent of the forecasted demands of the deployed fleet for a 90 day period? (2-77) |
85% |
|
What is prepared by NAVICP MECH and reflects the material authorized to be stocked by tenders (AS) in support of their assigned missions? (2-77) |
Tender and Repair Ship Load List (TARSLL) |
|
What sets forth guidelines for continuous identification markings of iron and steel products? (2-79) |
Federal Standard 183b (FEDSTD 183b) |
|
What show descriptive data of each major assembly, subassembly, and detail of airplanes, engines, accessories, and other aviation equipment? (2-83) |
Blueprints and drawings |
|
What manuals which are published under the direction of NAVAIR for each model aircraft, engine, or aeronautical equipment, basically contain information of maintenance significance? (2-84) |
Maintenance manuals |
|
What direct the accomplishment and recording of individual modifications and/or one time inspections of NAVAIR weapon systems and related equipment? (2-84) |
NAVAIR technical directives |
|
In some instances it is not feasible or advisable to remove a repairable component until a replacement has been received. Items that fall into this category are identified in the what? (2-85) |
Consolidated Remain in Place Listing (CRIPL) |
|
What is a detailed statement of IMA component repair capability at aviation activities? (2-86) |
Individual Component Repair List (ICRL) |
|
What gives policy and procedures for ICRLs? (2-86) |
NAVAIRINST 4790.18 (serires) |
|
What documents the configuration of installed, non-expendable ordnance equipment? (2-86) |
Ship Armament Installation List (SAIL) |
|
The SAIL is automatically distributed how often for active fleet ships, and shore activities? (2-86) |
Semi-annually |
|
What lists standardization documents issued in both Federal and military series which are applicable to Navy material? (2-87) |
DOD Index of Specifications and Standards (DODISS) |
|
The DODISS "hard copy" is approximately how many inches thick (without binders), and consists of the following three sections? (2-87) |
Five |
|
What describe the characteristics of materials and supplies used by the Navy as well as other government departments? (2-88) |
Federal specifications |
|
What (formerly known as JAN) are those which have been developed and approved by DOD for use by two or more departments or agencies in procurement of materials and services? (2-28) |
Coordinated military specifications |
|
What (formerly known as JAN) is prescribed engineering method or related practice which when referred in a contract, becomes a mandatory procedure for suppliers to follow in furnishing material to the military? (2-88) |
Military standard |
|
Who is Configuration Manager for afloat activities and is responsible for ensuring COSAL maintenance is performed as required? (2-89) |
Supply Officer |
|
What is a system for file transfer incorporating both satellite and land line technology? (2-90) |
Revised Alternative Dataflow (RAD) |
|
What is the process for updating an activity's configuration and logistics database and to aid in synchronization of configuration and logistics data between the ship's database and the Weapons System File (WSF)? (2-90) |
Automated Shore Interface |
|
Output from OMMS-NG Batch Job File will be processed in what? (2-90) |
R-SUPPLY |
|
What is maintained at NAVICP MECH, and is the master configuration record which contains configuration, repair parts allowances, and the technical data required to develop the ship's COSAL? (2-91) |
Weapon Systems File (WSF) |
|
What have been designed to allow activities to automatically update their applicable portion of the WSF? (2-92) |
Automated Information Systems (AIS) |
|
To process the tapes received from NAVICP MECH, what Program must be used? (2-95) |
Process Allowance List Records Program |
|
What allowances are established initially by AVCAL outfitting and subsequently updated through the AVCAL re-outfitting process (RE-AVCAL)? (2-96) |
Aeronautical material support |
|
Policy, procedures, responsibilities, guidelines, and other information pertinent to the AVCAL re-outfitting process are contained in what? (2-96) |
NAVICPINST 4441.15 (series) |
|
The MARINE AVIATION LOGISTICS AQUADRON (MALS) COSAL is updated every how often? (2-97) |
Three years |