• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/160

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

160 Cards in this Set

  • Front
  • Back
What type of equipment is used to coordinate the activities of fleet units by linking them with each other and shore stations?
Radio
Radio is the transmission and reception of electronic impulses or signals through space by means of what type of waves?
Electromagnetic
Who is ultimately responsible for safety?
Everyone
What are the basic requirements of a communications system?
Transmitter and receiver
AN/UCC-1, AN/URA-17, and CV-2460 are examples of what type of shipboard equipment?
Terminal
Which of the following frequency bands has limited naval use?
MF
What does the abbreviation "los" commonly mean?
Line-of-sight
The super-high frequency band is used extensively in what type of communications?
Microwave
The emission class of an rf transmitter is based on what characteristic?
Modulation
What type of modulation is especially suited for use in time-division multiplexing?
Pulse
For modern communication needs, CW is not a preferred method. Why is this true?
CW is slow
In an FM transmitter, the audio signal shifts the carrier frequency in what network?
Audio-shift
Which of the four receiver functions involves extraction of the modulation from the rf signal?
Detection
Which of the four receiver characterisitics require compromise because of bandpass requirements?
Selectivity and fidelity
What term is used to describe receiver amplification?
Gain
The term "dBm" is based on what standard reference level?
1 milliwatt
How many radio set controls can be paralleled to one transmitter/receiver group?
Four
To transfer control of switched circuits to another transmitter or receiver switchboard, you should use what switch position?
X
Which of the following terms is used for a machine that operates as a single-phase transformer?
Synchro
Extremely-low-frequency transmission is primarily directed at which of the following users?
Submarines
The very-low-frequency receive system is designed to receive what types of signals?
FSK and ICW
HF communications from shorebased transmitters to ships at sea using frequency and space diversity is an example to which of the following types of systems?
Fleet broadcast
Which one of the following equipment would you use to match a transmitter's output impedance to an antenna's input impedance?
AN/URA-38
The AN/VRC-80 is not just a vhf transmitter or receiver. What is the name given to a piece of equipment that performs both functions?
Transceiver
During UHF secure voice transmission, the operator uses a secure voice remote phone unit. What is the common term for this unit?
RPU
What term is normally used for microwave transmitter input signal?
Baseband signal
In a microwave transmitter, the linearize couples a portion of the output power back to the klystron. This allows for modulation densities as high as 1200 channels and compensates for what klystrong deficiency?
Nonlinearity
In a typical microwave receiver, what is the standard intermediate frequency?
70 MHz
Which of the following methods are usually used for microwave communications?
LOS and troposcatter
By which of the following methods can you increase the maximum number of intelligible signals transmitted on a single path?
Multiplexing
Which of the following communications methods involves subdividing a channel into smaller segments of equal size and placing a signal in each subchannel?
TDM
How many crypto and plain subsystems are used within SAS?
Two
One mode of teletypewriter operation is the synchronous mode. What other mode is used for basic teletypewriter operation?
Asynchronous
What is the name of the five unit code that includes mark and space signals and is used in teletypewriter operation?
Baudot
Which of the following problems is reduced by not using start and stop signals in the synchronous teletypewriter mode?
Distorted signal
Which of the following terms actually pertains only to modulation rate?
Baud
What device is used to change TTY DC pulses into mark and space signals to modulate the transmitter carrier wave?
Keyer
The Navy's two basic RATT systems are AFTS and RFCS. What is the RFCS system commonly called?
FSK
What device provides looping current for the tty?
A solid state power supply
What is/are used to interconnect all the TTY equpiment in any configuration needed?
TTY panel
During unpatching, pulling which plug from its tty panel jack first will produce a dangerous dc voltage on the exposed plug?
Set
How many rotary switch positions will you find on a remote transmitter control unit?
Three
What type of frequency diversity is used for multichannel?
Tone
Which of the following methods should you use to transmit printed text?
Facsimile
In whihc of the following publications can you find information on TEMPEST requirements?
MIL-STD-1680
What is the designator of any conductor intended to carry classified plain language terminating in RED equipment or the RED side of crypto equipment?
Primary Red
Of the following radios, which is popularly known as the "Gibson girl"?
AN/CRT-3A
Which of the following radios is particularly useful during tactical black-out operations?
AN/PRC-104
Which of the following radios has frequency hopping capability?
AN/PRC-117
The use of frequency hopping has certain advantages. One advantage is that the signal is difficult to detect. How is this accomplished?
No single carrier is used
What system was specifically designed to provide solutions to equipment planning by automatically determining the best system that each participant in a communications link should use?
CLIPS
Which term refers to reception and retransmission?
Active
Which of the following terms refers to transmissions received from a satellite?
Downlink
SATCOM links are only slightly affected by what phenomena associated with hf propogation difficulties?
Atmospheric
Trained crews can set up what type of satellite earth terminals within hours to establish communications in remote areas?
Mobile
How many NCTAMS have primary responsibility for communications via satellite?
Four
What system do subscribers use to receive Fleet Satellite Broadcast?
AN/SSR-1
What is the minimum number of broadcast channels that NAVMACS guards automatically?
Four
What is the bandwith (in kHz) of the satellite channels allocated to CUDIXS/NAVMACS?
25
What term is associated with a submarine commander's ability to receive messages via satellite at scheduled intervals?
Group broadcasts
Secure voice uses digitized voice with a 3-kHz voice channel. What type of voice modulation does this describe?
Narrowband
When using Secure Voice, a ship must contact what authority before initiating communications with a shore command?
Voice controller
Which of the following is a subsystem specifically designed for special intelligence communicatons?
TACINTEL
TADIXS-equipped surface ships and submarines operate in what mode?
Receive only
What subsystem is used in conjunction with TADIXS to transmit OTH-T data from the fleet to other ships and shore commands?
OTCIXS
What system was developed to multiplex several users on one 25-kHz satellite channel?
DAMA
What term is used to describe how the Demand Assigned Multiple Access data stream is formatted?
Frame
In the DAMA multiplexed data stream, which slow is used to test for communications error?
Link
What are all DAMA multiplexor transmit times referenced to?
The satellite
Which of the following equipments is used as the DAMA mulitplexor?
TD-1217B/U
Who performs day-to-day control and operatio nof naval satellite communications assets?
Naval Computer and Telecommunications Command
How man FLTSATCOM satellites have ehf packages installed?
Two
LEASAT satellites have fewer 25 kHz channels than FLTSATs. What ground based system do they use to maintain communications efficiency?
DAMA
What is the replacement satellite for GAPFILLER, FLTSATCOM, and LEASAT?
UHF F/O
The AN/FSC-79 satellite communications terminal transmits on what band?
SHF
Which of the following is another term used to describe the shf communications band?
X-band
The AN/WSC-5(V) UHF transceiver is capable of using differentially encoded phaseshift-keying and what other type of modulation?
FM
Which of the folloiwng radios is the primary shipboard los and satellite transceiver?
AN/WSC-3
What shipboard system is used to receive Fleet Satellite Broadcast?
AN/SSR-1
Which of the following is a spread spectrum type modem and is used with the AN/FSC-79 satellite communications terminal?
OM-51A/FR
The AN/USQ-69(V) data terminal set is currently used with what two subsystems?
TACINTEL/ NAVMACS
Audio digital converter CV-3333/U is used primarily as an analog-to-digital converter for what type of communications?
Secure voice
Where are the system interface connectors installed on the Electrical Equipment Rack CY-7597/WSC-3?
On the top panel
DAMA-equipped shore installations use the OK-481(V)2/FSC Control Monitor Group to interface TD-1271B/Us, AN/WSC-5(V)s, and baseband equipment. It can accomodate up to how many TD-1271B/Us?
14
Link-11 is designated as which of the following types of tactical data information link?
TADIL A
Link-11 Communications can operate with which of the following radios?
HF or UHF
The size of an antenna is determined by which of the following factors?
The operating frequency
The frequency range of an antenna can be extended by adding which of the following factors?
Either a capacitive or an inductive load
Whihc of the folloiwng function s ins NOT performed by the data terminal set?
Converting audio tones to digital data
The data terminal set communicates with the radio set via which of the following devices?
The communications switchboard
Which of the following individuals is responsible for assigning primary and secondar Link-11 frequencies before the deployment of a task force?
The task force commander
Net Sync continuously broadcasts which of the following signals?
Preamble frames
When the stored sync mode is operating, the picket station uses which of the following signals to establish a time base?
The sync signal received from NCS
Which of the folloiwng functions is NOT tested when Net Test is running?
CDS computer to DTS interface
The preamble of a Link-11message consists of a total of how many frames?
Five
During transmission of the preamble, the 605 Hz tone is transmitted at which of the following power levels?
+ 6 dB
To enable the DTS to detect frame transitions during the preamble, the 2915 HZ sync tone is phase shifted how many degrees at each frame?
180 degrees
Exactly how many data bits are contained in each Link-11 information frame?
24
The control stop code is generated by which of the following units?
NCS only
A call-up, or interrogation message, consisits of a total of how many frames?
Five
The two frames following a control stop code indicate which of the following?
The next picket address in the roll call
The DTS operates in full duplex when it performs which of the following operations?
System Testing
The DTS performs which of the followng functions?
Error detection and correction
The xis hamming bits added to the data word enables the DTS to correct what maximum number of data bits?
One
The DTS develops a composite signal consisting of what total number of frequency division multiplexed audio-frequency tones?
16
Bits 4 and 5 of a 30-bit data word are carried by which of the following audio tone frequencies?
1155 Hz
What is the basic unit of the Link-11 Transmission?
Tone
In a single frame, the DTS can tolerate what maximum phase shift error without generating an error code?
+/- 44 degrees
Which of the following Link-11 signals allows the receiving unit to correct errors caused by the relative motion between the sending and receiving units?
Doppler tone
When the DTS is in the OPERATE mode, exactly how many fault sensing sensors can cause the SUMMARY FAULT lamp to light?
14
When the SIDEBAND SELECT switch is in the DIV position, which sideband signal is processed for input to the computer?
The combination of the USB and LSB signals
During normal Link-11 operations, the DATA RATE switch on the mode control panel should be in which of the following positions?
TADIL A
The SYNC MODE switch on the mode control panel is used in conjunction with which of the following switches on the TADIL A Control Panel?
TIMING STORED/CORRECTED switch
The NET BUSY indicator of the TADIL A control panel is activated by which of the following signals?
Signal presence
The SYNC COMPT indicator is lighted after the DTS has acheived which of the following conditions?
It is in sync with NCS
With a single address control indcator, an NCS platform can control what maximum number of participating units?
20
Data exchange between the Link-11 DTS and the CDS computer is controlled by the DTS using which fo the following control signal protocols?
External interrupts
When the DTS recognizes own station address, it transmits which of the following signals first?
The first frame of the preamble
Whihc of the folloiwng events takes place when the CDS computer does not answer an ODR from the DTS within the specified time limit?
The DTS generates the stop code
Which of the following events occur if an interrogated picket station does not answer an initial interrogations from the NCS within 15 frame intervals?
NCS retransmits the interrogation to the unit that did not reply
A total of how many data tones are in teh composite tone package developed by the DTS?
16
During receive operations, exactly how many EDAC bits are extracted from the received data tones?
6
The EDAC bits enable the DTS to correct a total of how many received bit errors?
1
When operating the Link-11 with a UHF radio set, you should place the SIDEBAND SELECT switch in what position only?
USB
When you keep the radio set tuned to output maximum power, it causes which of the following problems?
Increases RFI/EMI on the transmitting unit only
When the NCS enters dummy PUs, whcih fo the following net conditions will exist, if any?
Net cycle time increases
When you set up the DTS to run a single-station POFA with the radio set, which of the following equipments is/are NOT checked?
Antenna coupler
Running a single-station POFA can assist the technician in isolating a problem in which of the following sections of DTS?
Transmit timing
A single broken line in the switchboard between the DTS and the crypto device could cause which of the following problems?
All bits randomly set to a logic "1" or a logic "0"
When you set up the DTS to runa single station POFA, the DTS must be configured to operate inw hich of the following modes?
POFA test mode
The multi-station POFA is run, what total number of data words are in each block of data transmitted?
230
When a multi-station POFA is run, all units participating in the test should be positioned within how many miles of each other?
25
A multi-station POFA should be run using which of the following frequencies?
The current operational frequency only
The multi-station POFA should be run for what minimum amount of time?
5 minutes
A multi-station POFA should be considered successful when the link quality factor is which of the following values?
Greater than 95 percent but less than 100 percent
A multi-station POFA is considered successful when the computed receive error factor is less than what percentage?
1
Which of the following buffers is acceptable to be received from an unrecognized station (UNREC STA) when a multistation POFA is running?
One buffer of 230 words
The DPG and CDG equipment cases of the LMS-11 provide isolation from which of the following environmental forces?
Shock and vibration
The LMS-11 system printer is part of which of the following equipment groups?
Accessory
The multi-station POFA is run in which of the following modes?
Roll call
The HP 9920U computer of the LMS-11 contains what amount of random access memory (RAM)?
2 MB
To determine the phase shift of the Link-11 audio tones, the LMS-11 uses which of the following methods?
Fast Fourier Transform Formula
The control/display group consists of which of the following units?
Color monitor and keyboard
The color display monitor of the LMS-11 uses composite video when it performs which of the following operations?
Both start-up and testing operations
When initializing the LMS-11, the operator enters 127 frames as teh CALL-TIMEOUT value. What type of Link-11 operation is indicated by this entry?
Satellite Link Operation
The link monitor mode of the LMS-11 displays what information?
Real-tiem link activity
Which of the following function keys on the LMS-11 keyboard would the operator depress to select the link monitor mode?
LM
A PU address of 77 is used by the LMS-11 to indicate which of the following units, if any?
NCS
Carrier suppression can only be tested when the Link-11 system is operating in which of the following modes?
Net Sync
Link-4A is used to transmit which of the following types of information?
Aircraft control and target information
Link-4A data is transmitted by using which of the following methods?
Frequency-shift keying
What ist he maximum number of aircraft that can be controlled by a single Link-4A controlling station?
100
In which of the following Link-4A modes of operation is an aircraft directed to a specific location to be at an optimum position for an attack?
Intercept vectoring
Intercept vectoring in which of the following Link-4A modes of operation is used to maintain safe flight patterns and assigns priority for landing approach?
Air traffic control
Which of the following Link-4A modes of operation is used for the remote guidance of bombers, reconnaissance aircraft, and drones?
Precision course direction
In which of the folloiwng Link-4A modes of operation is used to land an aircraft ont he flight deck of a carrier?
Automatic carrier landing system
The CAINS aircraft alignment data loaded into the navigation computer of the aircraft consists of which of the following types of data?
the latitude, longitude, and ship's velocity
The CAINS receive cycle duration is equal to what total number of milliseconds?
18
What total number of time slots make up the sync preamble of each transmit frame?
13
What total number of transmit frame time slots contain message data bits?
56