Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
33 Cards in this Set
- Front
- Back
How many men can the LR-1 hold?
|
1 man
|
|
What type of inflation assembly does the LR-1 have?
|
FLU-6/P or modified FLU-6/p
|
|
The liferaft consist of a _______ floor?
|
non-inflatable
|
|
The liferaft consist of a _______ flotation tube.
|
single compartment
|
|
What color is the LR-1?
|
Blue
|
|
What does the LR-1 consist of?
|
weathersheild,
sea anchor, sea anchor pocket, retaining line pocket, balistic bag |
|
What color is the weathersheild?
|
blue outside and bright red inside
|
|
How is the LR-1 inflated?
|
manually by pulling the inflation assembly
automatically by gravity drop kit actuating |
|
What does the inflation assembly inflate?
|
flotation tube
|
|
After boarding the LR-1 may be topped off by using the?
|
Oral inflation valve
|
|
The inspection cycle on the LR-1 is when?
|
Aircraft in which installed in except Helo-backpack is 360 day
|
|
The first and third ripcord pins are tied with what?
|
one turn size E nylon single
|
|
During the functional test the liferaft shall inflate in what time?
|
1 min
|
|
During the Pull Cable Proof Load Test you remove pull cable from valve and apply a ______ pull force between cable ball and pull toggle?
|
50 pounds
|
|
During the visual inspection you inflate the raft to what?
|
1.0 psig
|
|
Paint over incorrect markings with what?
|
Water proof ink(yellow or black)
|
|
How do you obtain correct gross weight?
|
CO2 cylinder subtract weight of diffuser plug from total weight
|
|
The cylinder gets charged to what?
|
0.50+-0.01 lbs
|
|
The markings on the CO2 cylinder shall be what?
|
black letters
1/4 inch high |
|
During the leak test you inflate to what?
|
2.0 psig
|
|
How long do you let the raft sit for leak test?
|
4 hours
|
|
Test pressure shall not decrease to less than_____from max 2.0psig
|
1.6psig
|
|
Attach retaining line to neck of cylinder with what?
|
larks head
|
|
You tack the larks head with what?
|
two turns waxed nylon 6 cord single
|
|
Tighten coupling nut to liferaft inlet valve to a torque of?
|
85+-5 in-lbs
|
|
You tighten the safety plug to what?
|
16+-1 ft-lb
|
|
Overcharging the carbon dioxide bottle by____will damage the blow-out disc?
|
0.05
|
|
If charge weight exceeds_______when charging remove bottle and check blow-out disk
|
0.56
|
|
When checking for leaks how long do you put the cylinder in water?
|
5 min
|
|
Holes can not exceed what?
|
2 inches
|
|
When patching you allow cement to cure for how long?
|
48 hours
|
|
How long is the sea anchor line?
|
16 foot type III nylon cord
|
|
Thread inflation valve onto cylinder and torque to what?
|
67 1/2 +- 2 1/2 ft-lb
|