Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
5 Cards in this Set
- Front
- Back
|
Question: 1 When the nat-traversal parameter is set to"always", the Session Border Controller compares the__________ andthe Layer-3 source address to determine whether the endpoint is behind a NATdevice and further compares the __________ to the Layer-3 source address todetermine whether to add the registration to its registration cache. A. SIP Proxy IP address;SIP Registrar address B. Sent-by of the bottom most Via header; host address of the Contact URI C. From address; host address of the Contact URI D. Host address of the Contact URI; From address E. Sent-by of the top most Via header; host address of the Contact URI |
Answer: B,D Sent-by of the bottom most Via header; host address of the Contact URI Host address of the Contact URI; From address |
|
|
Question: 2 Which statement about passwords on the Net-Net 4500 isFALSE? A. The User and Superusermodesare password protected. B. Passwords are stored inNVRAM. C. You do not need User andSuperuser mode passwords when accessing the ACLI using SSH. D. Passwords cannot be seen inthe output from the running configuration. E.The default user mode password is "acme" |
Answer: C You do not need User and Superuser mode passwords when accessing the ACLI using SSH. |
|
|
Question: 3 By default, the Session BorderController's FTP, ICMP, SNMP, and Telnet services cannot be accessed via themedia interfaces. In order to enable these services, the Session BorderController includes four fields that enable administrative traffic over themedia interfaces. These four fields are collectively known as the"HIP". Whatdoes the acronym HIP stand for? A. HostinPath B. Host Internet Protocol C. Host Interface Priority D. Healthy Interface Port E.Health Indicator Protocol |
Answer: B Host Internet Protocol |
|
|
Question: 4 The ___________ field allows you to set the healthscore at whichthe standby peer in a high availability (HA) scenario willswitchover to the active state without waiting for any configured timers toexpire. A. Emergency-threshold B. Health-threshold C. Active-threshold D. Switchover-threshold E.Ha-threshold |
Answer: B Health-threshold |
|
|
Question: 5 When configuring the Net-Net 4500, __________ SIPinterface(s) is/are allowed per realm, and __________ SIP port (s) is/areallowed for a SIP interface. A. Multiple; multiple B. One; 1024 C. Multiple; 999 D. One; multiple E.One; one |
Answer: D One; multiple |
