• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/25

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

25 Cards in this Set

  • Front
  • Back
Multiple choice:

Cutting all the hair to one length is a/an ____ cut.

A. elevation
B. blunt
C. graduated
D. beveled
Answer: B. BLUNT

Cutting all the hair to one length is a/an ____ cut.
Multiple choice:

A cut that has a stacked area around the exterior and is cut at low to medium elevations is a/an _____ cut.

A. elevation
B. blunt
C. graduated
D. beveled
Answer: C. GRADUATED

A cut that has a stacked area around the exterior and is cut at low to medium elevations is a/an _____ cut.
Multiple choice:

Cutting with the points of the shears to create texture is known as ____.

A. layering
B. undercutting
C. elevation
D. notching
Answer: D. NOTCHING

Cutting with the points of the shears to create texture is known as ____.
Multiple choice:

Subdivisions of a section, used for control when cutting are known as ____.

A. subsections
B. guides
C. sections
D. tension
Answer: A. SUBSECTIONS

Subdivisions of a section, used for control when cutting are known as ____.
Multiple choice:

If the hair is cut partially wet and partially dry, the results will be ____.

A. even
B. perfect
C. uneven
D. curly
Answer: UNEVEN

If the hair is cut partially wet and partially dry, the results will be ____.
Multiple choice:

The tools also known as trimmers that are used to clean necklines and around the ears are ____.

A. clippers
B. edgers
C. razor
D. shears
Answer: B. EDGERS

The tools also known as trimmers that are used to clean necklines and around the ears are ____.
Multiple choice:

A tool used to cut blunt straight lines is called the ____.

A. clippers
B. edgers
C. razor
D. shears
Answer: D. SHEARS

A tool used to cut blunt straight lines is called the ____.
Multiple choice:

The tool used to cut hair with a softer edge is known as the ____.

A. clippers
B. edgers
C. razor
D. shears
Answer: C. RAZOR

The tool used to cut hair with a softer edge is known as the ____.
Multiple choice:

The comb used for close tapers in the nape and sides is the ____ comb.

A. styling
B. barber
C. wide-tooth
D. tail
Answer: B. BARBER

The comb used for close tapers in the nape and sides is the ____ comb.
Multiple choice:

The comb used mainly to detangle the hair is the ____.

A. styling
B. barber
C. wide-tooth
D. tail
Answer: C. WIDE-TOOTH

The comb used mainly to detangle the hair is the ____.
Multiple choice:

____ points are points on the head that mark where the surface of the head changes or the behavior of the hair changes, such as the ears, jawline, occipital bone, or apex.

A. parietal
B. crown
C. elevation
D. reference
Answer: D. REFERENCE

____ points are points on the head that mark where the surface of the head changes or the behavior of the hair changes, such as the ears, jawline, occipital bone, or apex.
Multiple choice:

____ lines are parallel to the floor.

A. horizontal
B. perpendicular
C. diagonal
D. vertical
Answer: A. HORIZONTAL

____ lines are parallel to the floor.
Multiple choice:

Lines that are perpendicular to the floor are ____ lines.

A. parallel
B. perpendicular
C. diagonal
D. vertical
Answer: D. VERTICAL

Lines that are perpendicular to the floor are ____ lines.
Multiple choice:

A haircutting technique that is measured in degrees is ____.

A. carving
B. elevation
C. clipper-over-comb
D. traveling
Answer: B. ELEVATION

A haircutting technique that is measured in degrees is ____.
Multiple choice:

Lines that are used for blending and stacking are ____ lines.

A. parallel
B. perpendicular
C. diagonal
D. vertical
Answer: C. DIAGONAL

Lines that are used for blending and stacking are ____ lines.
Multiple choice:

A stable guide that does not move is also known as a ____ guide.

A. moving
B. traveling
C. stationary
D. mobile
Answer: C. STATIONARY

A stable guide that does not move is also known as a ____ guide.
Multiple choice:

When the hair is cut at 90 degrees and higher, the result is a ____ haircut.

A. blunt
B. layered
C. graduated
D. blended
Answer: B. LAYERED

When the hair is cut at 90 degrees and higher, the result is a ____ haircut.
Multiple choice:

A 180-degree haircut is also known as a ____.

A. low elevation cut
B. combined elevation cut
C. long layered haircut
D. blended elevation cut
Answer: C. LONG LAYERED HAIRCUT

A 180-degree haircut is also known as a ____.
Multiple choice:

A 0-degree haircut is also known as a ____ elevation.

A. low
B. high
C. reverse
D. blended
Answer: A. LOW

A 0-degree haircut is also known as a ____ elevation.
Multiple choice:

A barbering technique that has become popular with cosmetologists is the ____ -over-comb method.

A. clipper
B. razor
C. trimmer
D. shears
Answer: D. SHEARS

A barbering technique that has become popular with cosmetologists is the ____ -over-comb method.
Multiple choice:

A/an ____ is a thin continuous mark used as a guide.

A. angle
B. line
C. elevation
D. section
Answer: B. LINE

A/an ____ is a thin continuous mark used as a guide.
Multiple choice:

Gliding the fingers and shears along the edge of the hair to remove length is called ____ cutting.

A. point
B. slide
C. notching
D. razor
Answer: B. SLIDE

Gliding the fingers and shears along the edge of the hair to remove length is called ____ cutting.
Multiple choice:

The process of thinning with scissors is known as ____.

A. effilating
B. shaving
C. sliding
D. trimming
Answer: A. EFFILATING

The process of thinning with scissors is known as ____.
Multiple choice:

____ guides are used mostly in blunt (one-length) haircuts or when using overdirection to create a length or weight increase in a haircut.

A. traveling
B. movable
C. stationary
D. portable
Answer: C. STATIONARY

____ guides are used mostly in blunt (one-length) haircuts or when using overdirection to create a length or weight increase in a haircut.
Multiple choice:

____ is used mostly in graduated and layered haircuts, and in those situations where a length increase in the design is desired.

A. effilating
B. trimming
C. elevating
D. overdirection
Answer: D. OVERDIRECTION

____ is used mostly in graduated and layered haircuts, and in those situations where a length increase in the design is desired.