Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
25 Cards in this Set
- Front
- Back
|
If a RAID 5 array is composed of 4 disks with 100 GB of storage each, then what is the total capacity of the RAID 5 array for data storage?
a. 100 GB b. 200 GB c. 300 GB d. 400 GB |
c. 300 GB
|
|
|
A VHD has been created using the Disk Management Utility. Before the newly created
VHD can be used to store files it must be . a. detached b. configured as a spanned dynamic disk c. set to GPT partition style d. initialized e. set to MBR partition style |
d. initialized
|
|
|
The_________ partition hosts the main Windows 7 operating system files
|
Boot
|
|
|
When viewing the properties of a drive, the Tools tab allows access to which of the following?
(Select all that apply.) a. Defragmentation b. Disk Cleanup c. Classic Sharing d. Error Checking e. Advanced Security |
a. Defragmentation
d. Error Checking |
|
|
You have just plugged a USB hard drive into an older laptop and the disk has not appeared
as available. You are concerned that the hard disk hardware has not been recognized by the computer. What utility would you use to verify? a. DiskPart b. Disk Management console c. USB Management console d. Device Manager e. none of the above |
d. Device Manager
|
|
|
You have recently added a new USB portable hard disk to your computer. You have received
a notice that new hardware has been detected. The disk does not appear as a storage location. Which utility would you use to verify that the hard disk’s logical disk information is scanned by Windows 7? (select two.) a. DiskPart b. Disk Mangement console c. USB Management console d. Device Manager e. none of the above |
a. DiskPart
b. Disk Mangement console |
|
|
The maximum number of primary partitions that can exist on a MBR-style basic disk
is . a. 0 b. 3 c. 4 d. unlimited |
c. 4
|
|
|
A mirrored volume is also known as a RAID implementation.
a. 0 b. 1 c. 3 d. 5 e. The volume is not a RAID implementation |
b. 1
|
|
|
A data volume containing important documents has been deleted. You must recover the
accidentally deleted file data. This can be accomplished by . a. using DiskPart to recreate the volume with the same name and the recovery option enabled b. using Disk Management console to undelete the volume c. using DiskManagement console to recreate the volume with the same name and the recovery option enabled d. using DiskPart to undelete the volume 9. A data volume containing important documents has been deleted. You must recover the accidentally deleted fi le data. This can be accomplished by . a. using DiskPart to recreate the volume with the same name and the recovery option enabled b. using Disk Management console to undelete the volume c. using DiskManagement console to recreate the volume with the same name and the recovery option enabled d. using DiskPart to undelete the volume e. creating a new volume and recovering the files from a backup source |
e. creating a new volume and recovering the files from a backup source
|
|
|
Your computer currently runs the Windows 7 operating system. You have added a second
20 GB hard disk drive to your computer to hold research data for a project you are working on. You have created a single simple volume on the data hard drive that takes up all the free space on the disk. After formatting the simple volume with the FAT32 file system and copying 10 GB of data to the volume you realize that you need 8 GB of unpartitioned disk space on the data disk drive. The next step you should take to free space on the data disk drive is to . a. shrink the existing simple volume using the DiskPart command-line utility b. shrink the existing simple volume using the Disk Management MMC console c. convert the 20 GB data disk to a basic disk d. delete the existing simple volume and create a new one using the correct size |
d. delete the existing simple volume and create a new one using the correct size
|
|
|
The maximum number of logical drives that can exist within a single extended partition
is . a. 23 b. 4 c. 21 d. only limited by the availability of free space in the extended partition |
d. only limited by the availability of free space in the extended partition
|
|
|
Before a new hard disk can be managed through the Disk Management console in
Windows 7, it first must be . a. formatted b. partitioned c. erased d. initialized |
d. initialized
|
|
|
You are attempting to inspect the partition information for an existing hard disk using DiskPart
utility. After issuing the LIST PARTITIONS command, you receive an error message stating that no disk is selected for the action. Assuming the disk is the fi rst hard disk in the computer, which command should you issue next? a. SELECT DISK = 0 b. SELECT DISK = 1 c. FOCUS DISK ANY d. FOCUS DISK = 1 e. none of the above |
a. SELECT DISK = 0
|
|
|
A basic disk contains 3 logical partitions. How many of these partitions can be marked as
active? a. 0 b. 1 c. 2 d. 3 e. 4 |
b. 1
|
|
|
You have recently added a new USB hard disk to your computer. The hardware has been
detected and you have verified that the disk is visible to Windows 7. You are unable to store data files to the new hard disk. What is the first step you must perform before you can store data on the disk? a. initialize the disk b. scan for new hard disks c. create partitions or volumes d. convert the disk to a dynamic disk e. format the disk |
c. create partitions or volumes
|
|
|
You decide to move a hard disk from your computer to another computer that is also running
Windows 7. The disk is currently configured as a dynamic disk. The file data it currently contains must be accessible on the destination computer. Before moving the disk you should . a. convert the disk to basic storage b. use the Disk Management console to initialize the disk as a Foreign Disk c. use DiskPart to flag the disk as a Foreign Disk d. back up the disk’s data contents e. lock the disk using the Disk Management console |
d. back up the disk’s data contents
|
|
|
A basic disk contains 3 partitions. How many of these partitions can be primary
partitions? a. 0 b. 1 c. 2 d. 3 e. 4 |
d. 3
|
|
|
Upon opening the Disk Management console, you notice a disk whose status is reported as
Foreign Disk. This is most likely because . a. the disk’s Unicode property is enabled b. the disk has been corrupted c. the disk is shared on the network d. the disk was moved from another computer |
d. the disk was moved from another computer
|
|
|
The __________ partition contains the computer hardware specific files required to start
Windows. |
System
|
|
|
The maximum number of primary partitions that can exist on a dynamic disk is ?
a. 0 b. 3 c. 4 d. unlimited |
a. 0
|
|
|
An existing hard disk contains a second primary partition that is currently used to store data files. You are running out of space and would like to expand the data partition. There is only 8 MB of unpartitioned disk space available on the hard disk. You have added a new hard disk and have verified that the new disk is properly recognized by the operating system. You would like to span the data partition across to the new hard disk. To do this
you must first . a. back up the original partition data, create a new dynamic volume that spans the two disks, and restore the data b. link the two disks using the Disk Management console c. link the two disks using the DiskPart utility d. create a primary partition on the new hard disk the same size as the original data partition e. convert the disk holding the primary partition to a dynamic disk |
e. convert the disk holding the primary partition to a dynamic disk
|
|
|
22. You suspect that the data partition known as drive E on your system is unhealthy. To check
the health of drive E, what should you do next? a. Open the properties of drive E: b. Issue the command CHECK DISK = 1 in the DiskPart utility c. Run the Disk Scan Tool from Control Panel d. Run the Disk Scan Tool from the Accessories folder in the Start menu e. none of the above |
a. Open the properties of drive E:
|
|
|
File throughput performance when reading and writing large files is typically better for
striped volumes than simple volumes. True or False? |
True
|
|
|
The data files contained inside a VHD file cannot be browsed with Windows Explorer in
Windows 7. True or False? |
False
|
|
|
A data partition you have recently formatted using FAT32 is larger than required. You decide to decrease the size of the partition by shrinking it. This can be accomplished
by . a. using the Shrink tool b. using DiskPart c. backing up the existing files, deleting the partition, creating a smaller partition using a smaller size, and restoring the file data from backup d. converting the disk to a dynamic disk and then using DiskPart to shrink the partition |
c. backing up the existing files, deleting the partition, creating a smaller partition using a
smaller size, and restoring the file data from backup |
