Mastercam Application Study Guide (All Correct)

Front 1

How do you suppress fillets in a solid when there is no history?

Back 1

Modify solid fillets

Front 2

What page do you use to set a range in a Waterline toolpath?

Back 2

Tool

Front 3

Which options should you select on the Lead In/Out page when including points in your chain selection?

Back 3

Enter on first depth cut only, Exit on last depth cut only

Front 4

What corner type do you select if you want a sharp corner created with your slot mill tool?

Back 4

Corner Radius

Front 5

Which item in the Level Manager makes all levels visible?

Back 5

Select

Front 6

What is a bounding box used for?

Back 6

Controlling where your tool is allowed to go

Front 7

What is generally the most efficient way to group transform operations?

Back 7

By work offset

Front 8

Why is it a good idea to copy the name when creating a new plane?

Back 8

All of the above

Front 9

What is the biggest problem for creating toolpaths on solid models?

Back 9

Creating the model

Front 10

Why is it important to name toolpath groups logically?

Back 10

Provide information

Front 11

What happens when an imported operations work offset is already in use?

Back 11

The work offset is turned off

Front 12

On what page will you find the option for “Create operations independent of solid (create points)” in FBM Drill?

Back 12

Linking Parameters

Front 13

When generating an FBM toolpath you must create a new toolpath group..(T or F)

Back 13

TRUE

Front 14

What is a primary benefit of importing operations

Back 14

To create new toolpath

Front 15

How do you change the parameters of multiple toolpath operations at the same time?

Back 15

Renumber The workoffsets

Front 16

Why would you blank pieces of geometry?

Back 16

To remove them from the display

Front 17

Which option from the WCS menu allows you to manipulate the gnomon during plane creation?

Back 17

Rotate WCS

Front 18

Which right-click option is used to create a tool?

Back 18

Select Library Tool

Front 19

How do you select an entire chain when not in the Chaining dialog?

Back 19

Hold the control key and select

Front 20

Why would you ANALyze inner radii on your model?

Back 20

To determine the roughing tool size