• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/13

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

13 Cards in this Set

  • Front
  • Back
1. Which of the following DHCP message type is sent first in the process of obtaining an address lease?
a. DHCPOFFER
b. DHCPACK
c. DHCDISCOVER
d. DHCREQUEST
1. Which of the following DHCP message type is sent first in the process of obtaining an address lease?
a. DHCPOFFER
b. DHCPACK
**c. DHCDISCOVER (pg 103)
d. DHCREQUEST
2. At which layer of the OSI model does DHCP operate?
a. Session layer
b. Network layer
c. Application layer
d. Presentation layer
2. At which layer of the OSI model does DHCP operate?
a. Session layer
b. Network layer
**c. Application layer (pg 101)
d. Presentation layer
3. What protocol is used by the Trivial file Transfer Protocol (TFTP)?
a. User Datagram Protocol (UDP)
b. Transmission Control Protocol (TCP)
c. Internet Protocol (IP)
d. Internet Message Control Protocol (ICMP)
3. What protocol is used by the Trivial file Transfer Protocol (TFTP)?
**a. User Datagram Protocol (UDP) (pg 100)
b. Transmission Control Protocol (TCP)
c. Internet Protocol (IP)
d. Internet Message Control Protocol (ICMP)
4. A DHCP client first attempts to require its lease at half the lease time, which is known as:
a. DHCP reservation
b. T1
c. T2
d. DHCP lease
4. A DHCP client first attempts to require its lease at half the lease time, which is known as:
a. DHCP reservation
**b. T1
c. T2
d. DHCP lease
5. The _________is composed of the remaining addresses within a DHCP scope once all exclusion ranges have been applied.
a. Total address pool
b. Available address pool
c. Net address pool
d. Remaining address pool
5. The _________is composed of the remaining addresses within a DHCP scope once all exclusion ranges have been applied.
a. Total address pool
**b. Available address pool (pg 110)
c. Net address pool
d. Remaining address pool
6. The following is a lightweight version of FTP that uses the UDP protocol, which is used by the BOOTP protocol to transmit network configuration information:
a. TCP
b. IP
c. TFTP
d. SNMP
6. The following is a lightweight version of FTP that uses the UDP protocol, which is used by the BOOTP protocol to transmit network configuration information:
a. TCP
b. IP
**c. TFTP
d. SNMP
7. The following process will populate DHCP client as lease information from the registry to the DHCP database
a. Backup
b. Automatic restore
c. Reconciliation
d. Discovery
7. The following process will populate DHCP client as lease information from the registry to the DHCP database
a. Backup
b. Automatic restore
c. Reconciliation
**d. Discovery
8. The following is an administrative grouping of scopes that is used to support multiple logical subnets on a single network segment:
a. Host
b. Scope
c. Superscope
d. Multinet
8. The following is an administrative grouping of scopes that is used to support multiple logical subnets on a single network segment:
a. Host
b. Scope
**c. Superscope (pg 111)
d. Multinet
9. This indicates the location of the last information that was successfully written from transaction logs to a database file such as a DCHP database.
a. Log file
b. Jet file
c. Checkpoint file
d. Check file
9. This indicates the location of the last information that was successfully written from transaction logs to a database file such as a DCHP database.
a. Log file
b. Jet file
**c. Checkpoint file
d. Check file
10. The following is a hexadecimal address that is uniquely associated with a specific Network Interface Card (NIC):
a. MAC
b. JET
c. BOOTP
d. IETF
10. The following is a hexadecimal address that is uniquely associated with a specific Network Interface Card (NIC):
**a. MAC
b. JET
c. BOOTP
d. IETF
What is the core function of DHCP?
What is the core function of DHCP?

Assign addresses.
What is TFTP?
Trivial File Transfer Protocol

a lightweight version of FTP that uses UDP protocol.
At what layer of the OSI model does the DCHP function?
At what layer of the OSI model does the DCHP function?

Application layer