Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
1st |
Find guages |
|
2 |
Start engine |
|
3 |
Build Air Pressure ( the governor should cut out between 105 and 135 psi compressor unloading ) |
|
4 |
Release ( spring ) parking brakes and fan brakes down using approximately 20 PSI but no lower than 80 - 85 PSI - Stop fanning. |
|
5 |
The compressor should start loading ( Confirm by watching Air gushes starting to rise ) Continue to pump brakes |
|
6 |
Low Air pressure warning should come on at 60 PSI |
|
7 |
Continue to pump down until you reach 40 PSI on both guages. |
|
8 |
Bring engine RPM up to 1100 RPM and begin the 50 to 90 PSI check in 3 minutes. |
|
9 |
Start timing when the first gauge reaches 50 psi and stop timing when the second gauge reaches 90 PSI |
|
10 |
Build air pressure to anywhere above 105 PSI ( confirm spring brakes release ) |
|
11 |
Turn engine off |
|
12 |
To leak test by applying one full brake application for 1 minute making sure you lose no more than three PSI per minute |