Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
What equipment makes up hydrant gear |
Double headed standpipe Hydrant bar Hydrant key |
|
When are hydrant tests carried out |
Visual inspection annually Tested every 4 years. April - Sept |
|
What are the two types of leak detection device |
Magnetic - Can be replaced after using hydrant Screw on - Should not be re-fitted after using hydrant |
|
Explain the mains water supply |
Reservoirs Treatment plant Pumping station Trunk mains Service mains |
|
Explain hydrant plate markings |
Yellow plate with balck H Plate shows double/single hydrant Number between arms is mains size mm/inches Number between legs is distance to hydrant m/feet Some plates give directions to nearest hydrant |
|
What is the British standard for hydrants |
65mm, round thread outlet Minimum water flow flow 2000lpm at 1.7bar Anti-clockwise opening |