Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
If metal must be stored outside of racks, how should it be secured? A. Strapped to a bulkhead B. Tab welded to a stanchion C. Chained to a bulkhead D. Secured lying flat on the deck |
Secured lying flat on the deck |
|
|
What information is contained in the title block? A. Listing of material B. Scale C. Applicable revisions D. Applicable references |
Scale |
|
|
What type of view is used to indicate an alternate position of parts of the item drawn? A. Exploded B. Offset C. Phantom D. Sectional |
Phantom |
|
|
The SAE and AISI numbering systems used for the classification of carbon steels and alloy steels are almost identical. What is the only difference between the two systems? A. The AISI system add a letter designating manufacturing process B. The SAE system adds a letter designating a manufacturing process C. The AISI system adds a letter designating the major alloying element D. The SAE system adds a letter designating the major alloying element |
A. The AISI system add a letter designating manufacturing process |
|
|
Federal specifications use a set of letters to designate a group of materials. Which of the following groups of letters are you most likely to use in a HT shop? A. SS (steels) and PP (pipe) B. SS (steels) and WW (fittings) C. QQ (aluminum) and TT (tubes) D. QQ (metals) and WW (pipe) |
C |
|
|
A piece of aluminum plate is 99.10 percent aluminum. What numerical classification is used to designate this piece of plate? A. 1XXX B. 2XXX C. 3XXX D. 4XXX |
A. 1XXX |
|
|
If shimming is required for proper knife clearance on the shearing station of the universal ironworker, which, if any, of the following knives should you shim? A. The movable knife only B. The stationary knife only C. The movable and stationary knives D. None of the above |
I |
|
|
When bending plate on the press brake, what is the maximum degree of bend you can make? A. 45° B. 60° C. 90° D. 120° |
B |
|
|
When working with steel plates, erection aids serve what purpose? A. They align the plate only while being joined B. They hold the plate only while being joined C. They life the plate while being joined D. They hold and align the plate while being joined |
7 |
|
|
Watertight doors are installed using what type of weld? A. Butt B. Edge C. Lap D. Corner |
C. Lap |
