Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
What hose loads must a Tempe pumper carry? |
2 pre-connected 200' 1-3/4" attack lines w/75 psi fog @ 30° & 200gpm, flat loaded loops @ 2&4
2-1/2" rear pre-connect 200' attack line w/50 psi fog @ 30° & 250gpm flat loaded loop @3
1-3/4" rear pre-connect 200' attack line w/75psi fog @30° & 200gpm flat loaded@ 2&4
2-1/2" dry load of 400' w/ gated wye in flat load
1000' of 4" supply line flat loaded so no couplings flip when deployed pre-connected to a humat valve
|
Location Page 1 |
|
|
What special load does the American LaFrance carry? |
100' 1-3/4" attack bumper line. For car and debris fires not requiring 200' of attack line. |
Location Page 1 |
|
|
What load "May" be used as a front cross-lay if 3 all shifts agree? |
The Triple Load |
Location Page 1 |
|
|
What hose loads does L273 carry? |
1 200' pre-connect attack line w/75 psi @30° &200gpm flat loaded at 2&4
400' of 2-1/2" dry supply line accordion loaded
100' of 4" stortz supply line, 2- 50' sections flat loaded |
Location Page 2 |
|
|
The Rosenbauer reserve ladder carries what hose loads? |
2- 200' pre-connected 1-3/4 attack lines w/ 75psi fog @30° 200gpm flat loaded at 2&4
600' of 4" Storz supply line flat loaded
400' of 2-1/2" in a horizontal standpipe set up. Stored behind the supply line. |
Location Page 2 |
|
|
What hose does LT276 carry? |
2- 200' 1-3/4 attack lines pre-connected w/75 psi fog at 200gpm located in the thru body above the pump 600' of 4" Storz supply line attached to a humat valve. |
Location Page 2 |
