Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
What are the different sizes of hose? |
45mm, 70mm, 90mm and 150mm |
|
Where are the 45mm and 70mm hose primarily carried? |
Pump ladders and pumps |
|
What is the 90mm hose carried on? |
Hose laying units with 66 lengths on each appliance with 50% reserve in station |
|
What is the 150mm hose carried on? |
High volume pump |
|
Where is the hose reel hose stored? |
Stored coiled on drums in the side lockers of an appliance and used to deliver water at high pressure. |
|
What are suction hoses used for? |
Lift water from open water supplies such as swimming pools or rivers in to pump. |
|
When is the hose tested? |
.On acceptance .After operational use . annually |
|
Facts about the 45mm hose |
.23 meters .9kg .15 bar .4 lengths carried |
|
Facts about 70mm hose |
.23 meters in length .15kg .15 bar .10 lengths carried |
|
Facts about 90mm hose |
.30 meters in length .23.5 kg .15 bar |
|
Facts about 150mm hose |
.Available in 50m, 10m and 5m lengths |
|
Facts about Hosereel hose |
.19mm.diameter .18.3m per length .4 lengths per drum |
|
Facts about hard suction hose |
.2.44m.length .100mm diameter .2 lengths on appliance |
|
What are the two types of couplings? |
.Pressure release instantaneous coupling .quick release instantaneous coupling |
|
What is the name of a lip on a male coupling? |
Annular |
|
What hose lengths use storz couplings? |
90mm and 150mm |
|
4 facts for care and repair of hose |
.should be ramped when laid across a road .should not be kinked when under pressure. .should not be made up when frozen .should be under run and cleaned before stowing |
|
Name of the way a hose is rolled? |
Dutch roll |
|
What are the requirements of a good hose? |
• Should be reliable in use. • Should be resistant to bursting, leaking, chemical damage or kinking when passed around bends and corners. • Should not stretch excessively when pressurised (5% maximum in length) and not expand excessively when pressurised (10% maximum in diameter). • Should be light and easy to handle. Able to be made up when wet or dry. • Should be durable. They should have a high resistance to abrasion and be easy to repair. • Should be smooth surfaced internally to keep frictional loss to a minimum. • Should be capable of withstanding pressure changes and shock. |