Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
61 Cards in this Set
- Front
- Back
G00 *** |
Positioning |
|
G01 *** |
Linear Interpolation |
|
G02 |
Circular Interpolation - Helical Cutting (CW) |
|
G03 |
Circular Interpolation - Helical Cutting (CCW) |
|
G04 ** |
Dwell |
|
G09 ** |
Exact Stop |
|
G10 * |
Cancle of G11 |
|
G11 |
Parrallel and rotation shift of coordinate system |
|
G15 |
Selection of work coordinate system (Modal) |
|
G16 ** |
Selection of work coordinate system (One-shot) |
|
G17 *** |
Plane selection: XY |
|
G18 *** |
Plane Selection: ZX |
|
G19 *** |
Plane selection: YZ |
|
G20 ** |
Inch input confirmation |
|
G21 ** |
Metric input confirmation |
|
G22 *** |
Programmable stroke limit ON |
|
G23 *** |
Programmable stroke limit cancel |
|
G30 ** |
Positioning to home position |
|
G31 |
Skip function |
|
G40 * |
Cutter radius compensation cancel |
|
G41 |
Cutter radius compensation, left |
|
G42 |
Cutter radius compensation, right |
|
G43 * |
3D offset cancel |
|
G44 |
3D offset ON |
|
G50 * |
Enlargement and reduction of geometry cancel |
|
G51 |
Enlargement and reduction of geometry ON |
|
G53 *** |
Tool length offset cancel |
|
G54 |
Tool length offset, X-axis |
|
G55 |
Tool length offset, Y-axis |
|
G56 *** |
Tool length offset, Z-axis |
|
G57 |
Tool length offset, 4th-axis |
|
G58 |
Tool length offset, 5th-axis |
|
G59 |
Tool length offset, 6th-axis |
|
G60 |
One-direction positioning |
|
G61 |
Exact stop mode |
|
G62 |
Programmable mirror image |
|
G64 * |
Cutting mode (Cancel of G61) |
|
G71 |
Designation of return level for M53 |
|
G73 |
Fixed cycle, High speed deep hole drilling cycle |
|
G74 |
Fixed cycle, Reverse tapping cycle |
|
G76 |
Fixed cycle, Fine boring |
|
G80 * |
Fixed cycle, Modal cancel |
|
G81 |
Fixed cycle, Drilling cycle |
|
G82 |
Fixed cycle, Drilling cycle |
|
G83 |
Fixed cycle, Deep hole drilling cycle |
|
G84 |
Fixed cycle, Tapping cycle |
|
G85 |
Fixed cycle, Boring cycle |
|
G86 |
Fixed cycle, Boring cycle |
|
G87 |
Fixed cycle, Back boring cycle |
|
G89 |
Fixed cycle, Boring cycle |
|
G90 *** |
Absolute dimensioning mode |
|
G91 *** |
Incremental dimensioning mode |
|
G92 |
Setting of work coordinate system |
|
G94 *** |
Feed per minute mode |
|
G95 *** |
Feed per revolution mode |
|
G101 |
G code macro command |
|
G174 |
Cylindrical side cutting OFF |
|
G175 |
Cylindrical side cutting ON |
|
G274 |
Synchronized tapping, Reverse tapping cycle |
|
G284 |
Synchronized tapping, Tapping cycle |
|
Astrix * ** *** |
* has already been set when power supply is turned on ** Valid only in the specified block *** May be set by an initial condition parameter |