Related Essays

  • Dvr Case Study

    This chip contains the results of a very confidential test from GM. This chip is programmed to make any LS based motor gain 50hp while improving fuel economy...

  • Creative Writing: Uncle Tom's Cabin

    The second green button was labeled, “gas”. Under those buttons, were the yellow and red buttons. The yellow button was labeled, “signal”, and the red button...

  • Burn After Reading Summary

    The U.S. military thought it as “a very important document” and tried to find out the meaning by questioning, but IDE, without answering, took the opportunit...

  • Nt1310 Unit 2

    The code can appear in several forms, however in this lab the modular approach was used. This form allows the program to be created in sections, and then t...

  • Experiment 10 Respiration Lab

    To add the function on the screen and for more details the Lab Manual was used as a

  • Essay On Blast Wave Generating Device

    The manufacturing of each of these four basic parts is further detailed in the following

  • Lab 4.3 Lab

    4.3 was about pulling blocks but in a bigger surfaces area. In Lab 4.1 we had to pull different blocks across different surfaces. The surfaces were a tab...

  • Personal Narrative: My Car Murderer

    A successful cluck was heard of the gear dropping into place. I inched my left foot slowly backwards until the green machine grabbed hold of the clutch. The ...

  • What Are The Stages Of The Rock Cycle

    The new thing to learn in this lab is the fact there is an how cycle on just on

  • Velocity Lab Report

    Its horizontal coordinate defines the start time of the ramp and the vertical ‣ coordinate defines the velocity value. ‣ Keep holding down the mouse and dra...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/15

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

15 Cards in this Set

  • Front
  • Back

G28

Machine Home Zero

G91

Incremental Move

Insurance Line

G00 G17 G20 G40 G80 G90

T0x

Tool Number

M06

Tool Change

G54

Work Offset ZERO

G43 H0x

Tool Offset Comp / Tool number

M08, M09, S-speed, F-speed

Coolant On/Off, Spindle speed, Feed speed

G00

Rapid Movement

M05

Spindle Stop

M03

Spindle Start

O0001

Program Number

%

Start / End

M30

End Program

G01

Move straight line