Related Essays

  • Heat Trade: The Effect Of Vligination And Radiation Heat Trade

    Exp #2 a. The fan was set by using the control box to give an air velocity of 0.5 m/s while the voltage was kept constant at 20V. b. Ua, T9, T10, V and I...

  • Experiment Of The Marcet Boiler And Boyle's Law

    Once the pressure reached 650 kN/m2, the heater was turned down to 150V and the pressure and temperature were allowed to be stabilized. Once the system was s...

  • Understand The Effects Of Feed Preheating

    6. Calculate heat efficiency based on heat balance. 7. Monitor feed and product purity using specific gravity.

  • High Specific Heat

    1. For part 1, is the theoretical final temperature the same as the measured temperature? Explain any difference. No, in part 1, the theoretical final tem...

  • Heat Transfer Lab Report

    Next, the arrow icon was clicked to begin measuring temperatures. After that, the water drain valve was closed tightly. Next, the water flow was set to 2 gpm...

  • Zach Verlander Experiment

    The team leader for this experiment was Kyle McClain. Zach Verlander was supposed to be the recorder for this lab, but since he dropped the class I took his ...

  • Calorimetry Lab Report Essay

    21. The same procedure was repeated from step 11 to step 14. 22. The kettle of hot water and ice were used to regulate other temperatures (0ᵒC, 10ᵒC, and...

  • Thermal Equilibrium Essay

    Quantity of heat Q = mcθ absorbed or lost by a substance 4. What does specific heat 900 J of heat needs to be supplied to 1 kg of aluminium 900 J kgof alumin...

  • Wv5 Unit 5 Lab Report

    A Fisher Scientific thermocouple with the serial number of 102058457 was used to monitor the temperature in Tank 2. After ensuring the set up would not cause...

  • Thermochemistry: Endothermic And Enthalpy

    This is the device we will be using to determine the amount of heat produced by a chemical process. Another term to know is Enthalpy, as stated in the lab we...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/3

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

3 Cards in this Set

  • Front
  • Back

If a TDR is working properly what 2 readings should you get with a ohm meter ?

OL and or some resistance

What is the purpose of the heat anticipator in a mechanical thermostat?

Length of cycle

Where and how high should a thermostat be installed?

It should be on an inside wall and 48" to 54" above floor.