Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
What is the identified grounded circuit conductor may be which colour?
|
White
|
|
A T-Rated switch may be used to its ? current capacity when controller an incandescent lighting load?
|
Rated
|
|
To control a lighting load from one control point, what type of switch would be used?
|
Single Pole Switch
|
|
What type of switch is installed to control a lighting fixture from two different control points? How many switches are needed and what types are they?
|
2 Switches, Three way
|
|
When connecting single-pole, three-way, and four-way switches, they must be wired so that all switching is done in the ??? Circuit conductor?
|
Ungrounded (Hot) conductor
|
|
What must be considered when using a voltmeter to check for blown fuses in a motor branch circuit?
|
Feedback through the motor circuit
|
|
Which of the following electrical parameters is best measured with a megohm meter? (Megger)
|
Very high resistance
|
|
Why are magnesium rods installed inside a water tank?
|
To reduce corrosion
|
|
What value of heat (in watts) would the heater deliver at the new voltage of 120VAC instead of 240VAC
|
P=I2R
|
|
How much free conductors at all outlets and junction boxes?
|
6"
|
|
Whats a NMSC
|
Non-metallic sheath cable
|
|
Whats the indentify conductor?
|
neutral
|
|
Where should a box be flush?
|
Wood or drywall
|
|
What kind of hazards to motors have?
|
Electrical and mechanical
|
|
What do you need for a mechanical hazard?
|
A guard
|
|
What do dased lines mean?
|
Switch legs
|
|
Where should a gang box be supported by?
|
Two sides or solid piece behind it.
|