• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/31

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

31 Cards in this Set

  • Front
  • Back

Digital to analog

Ask, psk,fsk and qam are examples of

Analog to analog

Am and fm are examples of

Amplitude and phase

In QAM, both blank of a carrier frequency are varied

800

If the baud rate is 400 for a QPSK signal, the bit rate is blank bps

1200

If the bit rate for an ASK signal is 1200 bps, the baud rate is

1200

If the bit rate for an FSK signal is 1200 bps, the baud rate is

1000

If the bit rate for a 16 QAM signal is 4000 bps, what us the baud rate?

12000

If the baud rate for a 64 QAM signal is 2000, what is the bit rate?

700 KHz

Given an AM radio signal with a bandwidth of 10 KHz and the highest frequency component at 705 KHz, what is the frequency of the carrier signal?

Digital to analog

Conversion is the process of changing one of the characteristics of an analog signal based on the information to digital data

AM

Not a digital to analog conversion

ASK

The amplitude of the carrier signal is varied to create elements. Both frequency and phase remain constant

Fsk

The frequency of the carrier signal is varied to represent data. Both peak amplitude phase remain constant

PSK

The phase of the carrier is varied to represent two or more different signal elements

Amplitude and phase

A constellation diagram shows us the blank of a signal element, particularly when we are using two carriers

Ask and psk

Quadrature amplitude modulation is a combination of

QAM

Uses two carriers, one in phase and the other quadrature

Analog to analog

Conversion is the representation of analog information by an analog signal

Band pass

Analog to analog conversion is needed if the available bandwidth is

QAM

Which of the following is not an analog to analog conversion

OOK

The peak amplitude of one signal level is 0, the other is the same as the amplitude of the carrier frequency

1

How many carrier frequencies are used in BASK?

2

How many carrier frequency are used in BFSK

1

How many carrier frequencies are used in BPSK?

2

How many carrier frequencies are used in QPSK

2

The constellation diagram of BASK has blank dots

2

The constellation diagram of BPSK has

4 dots

The constellation diagram of QPSK has

16 dots

The constellation diagram of 16 QAM has

10

The Federal Communications Commissions allows blank KHz for each AM station

100

The FCC allows blank KHz for each FM station