Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
110 Cards in this Set
- Front
- Back
How many wheels are on the A/S32A-31A aircraft tow tractor? |
6 |
|
How many wheels are on the A/S32A-32 aircraft tow tractor? |
3 |
|
What is the drawbar pull of the A/S32A-31A tow tractor? |
8500 |
|
What will normally be mounted on the back of the A/S32A-31A aircraft tow tractor? |
Starting unit ( msu) |
|
How many different variations are there of the MSU-200NAV |
2 |
|
Unloaded, the A/S32A-32 aircraft tow tractor's maximum allowed speed is |
5 |
|
What aircraft tow tractor will be used in areas where there are poor weather conditions for aircraft towing? |
A/S32A-37 |
|
Loaded, the A/S32A-32 aircraft tow tractor's maximum allowed speed is |
2 |
|
Which aircraft tow tractor is called the mid-range tow tractor MRTT? |
A/S32A-45 |
|
The shipboard helicopter handler's low profile is to permit compatibility with the |
CH-53 |
|
On the MEPP, what is the volt direct current (VDC) provided to give electrical power to aircraft? |
28VDC |
|
On the MEPP, automatic shutdown will occur if the engine exceeds |
2400 |
|
In the GSE licensing process, what official will sign the yellow license upon completion of the phase 2 portion? |
AIMD Officer |
|
The NWC-4 chock is adjustable to fit main landing gear wheels up to |
45 inches |
|
The TD-1B has a safe working load of |
10,000 LBS |
|
What is the safe working loaded of the aero full-power tiedown? |
30,000 LBS |
|
Which ALBAR is standard for towing most land- and shore-based aircraft? |
15 |
|
Which towbar is especially designed for moving H-46 helicopters on amphibious assault ships? |
8 ALBAR |
|
What is the length of the 8 ALBAR? |
9 feet |
|
What is the length of the 8 ALBAR? |
9 feet |
|
For technical information on the ALBAR, you should refer to |
NAVAIR 19-1-137 |
|
When operating the aircraft elevator, a white light illuminated on the control station indicates |
That power is available |
|
During aircraft elevator operations, what station is responsible for notifying all stations when there is a loss of power? |
Machinery room |
|
Overall maintenance and operational upkeep of the elevator machinery rooms amd systems are the responsibility of |
A DIVISION |
|
How many sets of double guided rollers are securely bolted to the elevator platform? |
2 |
|
In the event of loss of air pressure, what type of gear systems is provided for each elevator locking bar on most ships? |
Manual |
|
In the event of loss of electrical power during elevator operation with a loaded platform, the residual capacity of the pressure tanks is sufficient to permit |
Raising the platform to flight deck |
|
Hangar division doors are designed to provided for |
Fire containment |
|
What Naval Ship's Technical Manuel (NSTM) would you refer to for aircraft elevators? |
588 |
|
Hangar bay doors are designed to close within how many minutes? |
1 |
|
What Naval Ship's Technical Manuel (NSTM) would you refer to for deck coatings? |
634 |
|
Nonskid is normally applied by the use of what method? |
Roll |
|
What is the service life of nonskid (MIL-PRF 24667) type V composition type L? |
3 years |
|
What is the service life of nonskid (MIL-PRF-24667) type II composition type G? |
6 momths |
|
When applying nonskid, what official shall specify location for troweled applications, as well as direction of troweling? |
Type Commander |
|
How long should primer be stored in the temperature range of 70 to 80 F prior to mixing? |
24 hours |
|
When applying primer, it should be allowed to cure until? |
It is tack free |
|
What factor will tremendously effect nonskid cure time? |
Temperature |
|
Nonskid should normally be fully acceptable for flight operations after |
7 days |
|
Nonskid should normally be fully acceptable for flight operations after |
7 days |
|
Following 96 hours after application, nonskid can normally be exposed to |
Support equipment traffic |
|
The cure time of primer will generally range between |
6 to 12 hours |
|
The A/S32A-30A is primarily designed for towing |
Ground support equipment |
|
What is the secondary mission of the A/S32A-30A |
Tow small aircraft |
|
The A/S32A-32 towing tractor is controlled by the use of a |
Joystick |
|
What is the maximum towing capacity of the A/S32A-30A |
40,000 LBS |
|
The overall height of the the A/S32A-32 towing tractor is |
30 inches |
|
What is the drawbar pull of the A/S32A-32 towing tractor? |
14,000 |
|
How many phases are there in ground support licensing program? |
2 |
|
Who will handle the phase two portion of the ground support licensing program? |
Division |
|
Phase two of the ground support licensing program covers |
On-the-job training |
|
What type of material is the NWC-4 universal wheel chock made from? |
Polyurethane |
|
What is the difference between the regular TD-1B and the type used on amphibious assault ships? |
Lenght |
|
For specific information concerning the high power tiedown assembly for each type of aircraft, you would refer to the |
MIM |
|
When utilizing the NWC-4 universal wheel chock, where should the adjustable end of the chock be placed on the aircraft wheel? |
Aft |
|
The TB-1B can be tightened by use of the |
Tensioner assembly |
|
The 24 ALBAR is designed specifically for what aircraft? |
SH-60 |
|
When rhe aircraft elevator is loaded to capacity, with all pumps in use, what is the total duty cycle time? |
60 seconds |
|
The horizontal locking bar of the aircraft elevator are power |
Pneumatically |
|
Aircraft elevator safety stanchions should not be operated in |
Automatic mode |
|
V-1 division is responsible for what part of the aircraft elevator operation? |
Flight deck |
|
V-3 division is responsible for what part of aircraft elevator operation? |
Hangar deck |
|
A division is responsible for what part of aircraft elevator operation? |
Machinery room |
|
There are hoe many different compositions of nonskid |
2 |
|
Nonskid coating kits are supplied in how many components? |
2 |
|
The shelf life of nonskid is |
1 year |
|
What is most preferred method of nonskid removal? |
Water-jetting |
|
In order to ensure the correct primer coverage, the DFT reading must be taken when the primer has |
Cured |
|
When completing the primer application process, what will allow corrosion to set in and degrade the process |
Hoilday |
|
VLA marking on the hangar deck are placed from the deck? |
14 feet |
|
The ship frame number marking are placed on both the syarboard and port bulkhead at frame interval of |
10 |
|
For what class ship does the Naval Air warfare Center Visual Landing Aids General Service Bulletin, number 8 establish standard certification requirement and inspections? |
CVN |
|
What features of most value to the ABH are the tow tractor's |
Weight, maneuverability, and drawbar pull |
|
What is maneuverability of the tow tractor? |
The dimensions and turning radius. |
|
What is mean of drawbar pull of any tow tractor? |
Type and condition of the surface on the which the tractor is being used |
|
What is the maximum aircraft weight that tractor can safely handle? |
10 times the drawbar pull. |
|
What is A/S32A-30A known as |
Support equipment and aircraft tow tractor. |
|
What is the lenght, height, towing capacity, turning radius, width, oil pressure, tire pressure, fuel, electrical system, and gross weight of A/S32A-30A?. |
Lenght:102, height:84, turning radius:142, towing capacity:40,000, width: 70, oil pressure: 7, tire pressure: 50, fuel: 12, electrical system: 12vdc, and gross weight: 6970 |
|
What is the characteristics of A/S32A-32?. |
Lenght: 148, height: 30, towing capacity: 14,000, turning radius: 0, width: 81, gross weight: 11,500, lifting capacity: 16,000, fuel: jp-5, ground clearance: 5 inches. |
|
What is the characteristics of A/S32A-31A? |
Gross weight: 12,400, drawbar pull: 8,500, height: 40, lenght: 117, width: 70, ground clearance: 7 1/2, fuel: 85, tire pressure: F/T 70, B/T 60, turning radius: 132, |
|
When would brake warning light illuminate on A/S32A-31A? |
1350 psi |
|
When would engine/transmission warning light will illuminate on A/S32A-31A? |
When torque coverter reaches 300 ºF, engine temperatures go above 215 º F, and the oil pressure drops below 6 psi. |
|
The engine water temperature should never exceed and transmission temperature never drop below |
196 ºF and 220 ºF |
|
What is A/S32A-45 known as |
Mid-range tow tractor |
|
What is the characteristics of A/S32A-45? |
Gross weight: 13,000, drawbar pull: 10,000, width: 70, height: 46, lenghts: 124, speed per hour: 13, fuel: 20, tire pressure: 60, ground clearance: 5 1/2, turning radius: 200. |
|
What is A/S32A-48 known as |
Large land- based tow tractor or buddha |
|
The A/S32A-48 can tow aircraft between |
80,000 to 350,000 |
|
What is the characteristics of A/S37A-3 or MEPP? |
Gross weight: 5060, lenght:102, turning radius: 13 feet, width: 58, fuel: 18, hyd. Drive pressure: 1500 psi(2400max), ground clearance: 7, height: 45 1/2. |
|
The MEPP is designed to provide what? |
115- volts alternating current(VAC), 3 phase, 400- hertz, or 28 VDC |
|
How many wheels the MEPP have? |
4 |
|
What iselectrical system in the MEPP provide the starting, lights, and instrumemtation? |
24-VDC |
|
What is three type of preventive maintenance on tow tractor? |
Preoperational inspections, periodic inspection, and detailed maintenance inspections. |
|
What is manual for GSE license? |
4790.102 |
|
What is phase one of Gse license? |
Training with AMID instructor |
|
Any discrepancies with NWC-4 turned it in to who? |
AMID |
|
When is the NWC-4 is visually inspected? |
Monthly |
|
On shore station, how many types of size chocks are there? |
3 different size |
|
On shore station, the wheel chock can fit how many inches in diameter? |
33 |
|
How many pounds does the TD-1B weight? |
12 pounds |
|
How many lenght the TD-1B is provide in? |
2, the lenght are 9 and 14 |
|
How many pounds does the aero full-power tiedown weight? |
102 |
|
Details instructions on A/B tiedown for each type of aircraft? |
Maintenance information manual. Known as mim |
|
How many types of ALBAR are there? What are they |
There are 4 types of ALBAR. 8=108 or 9, 15=180 or 15, 20=240 or 20, 24=300 or 25 |
|
How much does each ALBAR weight? |
8: 128LBS, 15: 170LBS, 20: 218LBS, 24: 255LBS |
|
When control panel on elevator is energized what color is display? |
Green |
|
What is the thickness of primer supposed to be? |
Between 2 to 4 mil |
|
What are two ways to applied primer |
Roll or spray |
|
What is the target surface profile of properly cured nonskid should be between? |
Minimum 1/32 and maximum 1/16 |
|
Do not apply nonskid within how many inches for deck edge and padeyes |
Deck edge 5 and padeyes 2 |
|
What is the abrasive blasting require ld to achieve? |
3 to 4.5 mil |