Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
24 Cards in this Set
- Front
- Back
- 3rd side (hint)
How many divisions are in AIMD? |
5 |
|
|
What work centers make up IM-1? |
Admin, Material control, Production control, QA (IAW the NAMP) |
4 |
|
What work centers make up IM-2? |
Power plants, Airframes, Tire & wheel, Paraloft, Floatation shop, Oxygen shop, Oil lab, NDI, Hydraulics |
9 |
|
What work centers make up IM-3? |
Generator repair & battery shop, Communications/ Navigation and communications security shop, Navigation radio detection and ranging shop, Forward looking infrared shop, Consolidated automated support system shop, Electronic countermeasures shop, Miniature and micro and cable repair shop, Metrology and calibration shop, Aircraft armament shop, Aircraft gun shop |
There are 10 |
|
What rates make up IM-3? |
AE (Aviation Electrician's mate) AT (Aviation Electronics Technician) AO (Aviation Ordnanceman) |
3 |
|
What rates work in Calibration Lab? |
AT, AB, MM, EM, HT, IC, IT,ET |
There are 8 |
|
What is another name for IM-3? |
Avionics and Armament (AVARM) |
|
|
What rates make up IM-4? |
GSE (Ground Support Equipment) |
|
|
What work centers make up IM-5? |
3M, AIRSpeed, QA (At this command) |
3 |
|
What are the 3 types of audits performed by QA? |
1. Special. Conducted anytime a new supervisor is assigned or when requested. 2. Work center. Conducted semi-annually. 3. Program. Conducted annually. |
S W P |
|
What does TEC stand for and what is it? |
Type Equipment Code. 4 digit alphanumeric number that identifies a component used with a specific aircraft, engine or SE. |
|
|
JOAP |
Joint Oil Analysis Program |
|
|
Purpose of JOAP |
Determine pending failure of aircraft engines and gearboxes by sampling oil systems and metal flakes. |
|
|
What do you need to know about Tire and Wheel Safety Program? |
Maintenance on tire and wheel assemblies can be deadly. |
💀 |
|
IPB |
Illustrated Parts Breakdown |
|
|
What does the IPB contain? |
Illustrations and part numbers of the aircraft and support equipment. |
|
|
MAF |
Maintenance Action Form |
|
|
JCN |
Job Control Number |
|
|
The first 3 digits of the JCN is known as what? |
ORG Code |
|
|
What is AIMDs ORG Code? |
C9Y |
|
|
What are the 5 basic functions of a jet engine? |
Intake, Compression, Combustion, Turbine, Exhaust |
Suck, squeeze, bang, spin, blow |
|
What aircraft uses the turbo shaft engine? |
Helicopters |
|
|
What aircraft uses the Turboprop engine? |
E-2C and C-2 |
|
|
What aircraft uses the turbofan engine? |
F/A-18 |
|