• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/87

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

87 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

AS

To take or transfer control of a dispatch group.

ASL

To list dispatch group assignments for each radio console

CON

To reassign control of a unit from one radio console to another.

CONL

To list units controlled to other than their home district.

CONX

To release control of unit to their default dispatch group.

COV

To indicate a unit should be suggested for calls in other than their home district.

COVL

To display a list of units covering their own districts.

COVX

To cancel a unit being suggested for events in other than his home district.

L

To log a unit on duty with their default info (if it exists); use it to log on Admin and Detective units primarily.

LI or LUI

To log a unit on duty with personnel info though most units log themselves in service using MobileCOM; you can log a unit in service AND control it with this command at the same time; you can add a special indicator to note a rider.

LIA

To add new info (such as another ofcr) to a logged in unit.

LIM

To remove info from a logged-in unit.

LO

To log a unit off duty.

LT

To log on a temporary unit (for units not being in the system); requires a district assignment.

MON

To monitor (but not control) other dispatch groups; monitored groups show up in ( ) in System Window

RADIO

To add/assign a radio to a unit if there isn’t one there already; is not used to substitute one radio for another.

RADIOX

To delete a portable radio number from a unit.

XID

To change unit ID from one unit to another; for patrol units covering another shift and/or district @ shift change; unit must be in the clear.

XIDL

Lists units that have been assigned a different ID on the current date using XID.

A

To show a unit as arrived @ an event.

A 1W2 Comment: SEES THE CAR BUT NO ONE AROUND

AT, ATU, ATOK, ATC

Puts a unit on a traffic stop associated with the event they’re already on; you must use the AT command series to update and clear AT events.

AT 1A12 Location: N183rd ST/AURORA AVE N Plate:123GIP Comment: POSSIBLE SUSP VEH

AV

To make a unit available on scene for recommendation when assigned to an event; an asterisk “*” appears for that unit on the Unit Status monitor.

AV 1F89 , Comment: JUST DOING PAPERWORK

B, BE, BA

To assign a unit as backup to another.

B 2F40 2F35 Location: SE 208TH/ 116TH AVE SE Comment: CHECKING FOR SUSP VEH

C

To clear a unit from an event.

C 284 FCR: 404E0

CAN

To cancel an event.

CAN .518 Comment: PER 1F

CAPSDL

To list capabilities/resources for all units defined in the system; F1 Help available.

CAPSL

To list capabilities/resources for logged on units: F1 help available.

CAPSL Resource: HNT

CB

To send a call back request.

CB .5477 Terminal: C112 Comments: PLEASE ADVISE OF DELAYS DUE TO FATALITY ACCIDENT.

CBR

To send a call back request, with the event in reverse chronological order.

CBR .5477 terminal C102 Comment: SEE 1V1’S COMMENT, PLEASE CALL TOW COMPANY W/ DIRECTIONS.

CLONE

To create a copy of an event; requires a patrol district if the location is not geocoded

CLONE 2C23 PatArea: C2 Type: VUSCA Comment: 2nd CASE NEEDED.

CLV

To close a call and geocode the address.

CLV .5775 Location: S 288TH ST/ INTERNATIONAL BLVD S

CRIT

To keep a critical call and send all other routine events to another dispatch position.

CRIT .9755 Terminal: D157 [gives control of all events BUT this one to D157]

CUFF

To indicate in custody status.

CUFF 422 , Comment: 1 FEMALE

D, DE, DA

To dispatch a unit to an event.

D .5632 1W2 1B57

DUP

To duplicate an event and cancel it; it automatically makes a notation about the reference event # and closes the dupe.

DUP .2249 .2257 [CAD maintains the first event, cancels the second; automatically cross-references both events].

ER

To show a unit back enroute to an event

ER 4G

H

To hold an event

H 3 [holds the event and changes the priority - in this case to a 3]

HA

To hold all events that have previously been Selected

HI

To hold an event and add info

HI FCR [event is held w/ indication that an FCR is needed]

HP

To hold an event pending notification.

HT

To hold an event for a later time

HT 08016 0730 , Comment: HOLD FOR DAYLIGHT HOURS

HTL

To list the events held for time; can specify dispatch group or district.

HTL District: K8

HTX

To cancel the hold for events with a time.

HTX .4988 , Comment: RP IS READY FOR CONTACT EARLIER THAN EXPECTED

HU

To hold an event for a unit

HU 4F60 , Comment: WILL HANDLE AFTER HIS TRANSPOT

HUL

To list the events held for units; can specify dispatch group or district.

HUL [ w/ no parameters lists all events held for a unit]

HUX

To cancel the hold for a unit.

HUX.4588 Comment: F45 WILL HANDLE AFTER ALL

INV

To create an involvement record for a subject vehicle.

MI

To enter miscellaneous comments to an event; M will build a new command for continuous comments after each press of the enter key. Dispatcher will get a notification flag on the unit/event status monitor

MN

To enter a miscellaneous comment to an event w/o prompting a notification flag on the unit/status monitor

N

To assign an event number to an out of service call

N 1H10 Comment: FLAGGED DOWN ABOUT A VAND WHILE 577

NTFY

To indicate a notification has been made for an event.

NTFY .4545 Notified: SPVSR Comment: FOR ARSON INV

OK

To indicate a unit is 10-4; does NOT clear a Status Check timer that has been set, but turns it off after activation.

OK 2N12

Out, 575, 576, 577, 578, 579, 580, 581, 582, BOVEH, COURT, EAT, ROLL, TRAIN

To put a unit in and out of service status

OV

To put a unit on an on view event; if the location does not geocode, you MUST include a patrol district in the command string.

OV 2H21 type: DVP Location: 8210 COAL CREEK PKWY SE Comment: MGR ADVISED ME THERE’S A DV IN UNIT A103

OVE

To show a unit enroute to an on-view event

OVE 71 Type: WARR Location: RJC Comment: FOR A BRIEFING BEFORE WARR ATTEMPT W/ THE FEDS

OVMT

On-view command for Metro PD

P

To preempt a unit from an event

PFLAG

To reset premise warning flags when not current; only used if premise info was being entered at the time the detail was viewed.

R

To display an event in the recall window

R 2V2


R .8723

RE or TRANS

To transfer control of an event to another dispatch position; units assigned to the event continue to show on screen of home dispatch group.

RE .4116 Group: TAC

RR

To display an event in the Recall window and show unit recommendation

RR 1F45

S or F6

To select call for dispatch;

S .4527

SC

To set a status check contact timer for a unit on an event

SC 1A16 Contact: 2

SS

To put a unit out on a subject stop

SS 3A24 Location: -N 182 st/ Aurora av PatDist: A2 Comment: 2 SUBJECTS LURKING IN THE SHADOWS

STACK

To stack an event for a unit

STACKD

To list all stacked events

STACKL

To unstack an event for a unit

STACKP

To dispatch a stacked event to the unit it was stacked for

STACKX

To preempt a unit and stack an event for later.

STG

To show a unit as staged for an event.

TP, SP

To put a unit on a vehicle or subject pursuit.

TP 2K10 Location: SW 116th st/19th ave sw Plate: JMF123

TR


TRKCJ TRRJC TRSCORE TRPCT TRJUVE TRHOME

To put a unit in transport status.

TR R40 Location: - Renton airport Mileage: 4221 Comment: W/ 1 FEMALE TO MEET RENTON PD

TRC

To clear a unit from transport status

TRC R40 Mileage: 4225

TS

To put a unit out on a traffic stop

TS 1O0 Location: NE 14th St/228th AVE NE Plate; 311MMB PatArea: O1

TUL

To change the location of a traffic stop location

TUL 4K12 Location: PASSING 21 AV SW

UA

To make a unit unavailable for recommendation when assigned to an event; reverses the AV command status

UL

To change the location of a unit and show it enroute to a location different from the event.

UL 2N12 Location: 3206 S 200th ST Comment: TO CHECK FOR SUSP VEH

ULA

To show a unit as arrived @ a location different from the event

ULA 1K17 Location; S 128TH ST/ 1ST AVE S, Comment: OUT W/ A POSSIBLE SUBJECT.

ULA

To show a unit as arrived @ a location different from the event

ULA 1K17 Location; S 128TH ST/ 1ST AVE S, Comment: OUT W/ A POSSIBLE SUBJECT.

X

To exchange unit assignments; between 2 assigned units or 1 assigned and 1 unassigned

X 1L2 2L12

XC

To reopen a closed event

XC .5775 Comment; CLOSED IN ERROR

XREF

To cross reference multiple events

XREF .235 .175 Comment RELATED TO EARLIER CALL

ROFT

To indicate rotation failure when tow company declines; keeps the company at the bottom of the list; not for private tow declines though; F1 Help available

ROTF 00052 Rtype: TOW Company: MYTOWCO FailReason: C_NOTRUCK

ROTQ

Allows for tow searches on tow rotations using an event number or specific criteria; F1 Help available w/ the cursor in some of the fields

ROTQ .K193902

ROTR

To preform a rotation request; Rtype and ReqReason are required;


F1 help available

ROTR 284 Rtype: Tow Community F7 ReqReason: ARREST Plate: 123JFM

ROTT

To check which company would get the next rotation; it doesn’t change the tow company order and no segment is written to the event

ROTT 284 Rtype TOW

ROTX

To cancel a tow request when a tow is no longer necessary; puts company back on top of the list; F1 help available

ROTX 3D1 Rtype: TOW Company MYTOWCO CancelRsn: VEH MOVED