Dcicn-640-911-Ch12

Front 1

Define 2 ways of entering the Setup utility?

Back 1

When logging into a switch with the default settings.
By using the "Setup" command.

Front 2

How do you exit the setup utility?

Back 2

CTRL + C

Front 3

What settings are required for a Console connection?

Back 3

Speed - 9600
Data Bits - 8
Stop Bits - 1
Parity - None
Flow Control - Xon/Xoff

Front 4

Name 4 methods of managing the switch.

Back 4

a. Aux port using dialup modem.
b. SSH in-band.
c. Dedicated Management Interface.
d. Via the Connectivity Management Processor on the Sup1 card. Lights out management should the device be out of service.

Front 5

What GUI can be used to manage the Unified fabric, UCS and SAN components of the DC?

Back 5

Cisco Data Centre Network Manager (DCNM).

Front 6

Describe the default management roles on a Nexus device.

Back 6

a. Network-Operator - Junior Admin - basic monitoring commands.
b. Network-Admin - full access.

Front 7

If the CLI help facility ("?") is not returning the options you would expect, what might the issue be e.g. "router ?" does not display an option for OSPF?

Back 7

The feature may not be enabled. Enable using the relevant command e.g. "feature OSPF".

Front 8

Name 2 CLI methods of obtaining help.

Back 8

a. ?
b. Error messages.