Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
22 Cards in this Set
- Front
- Back
Why is there an increase in Need for well quality |
Safety economics less conservative design and government regulation |
|
What AWS document describes the rule for CWI certification program |
AWS qc1 |
|
True or false weld quality control should begin after welding has been initiated |
False |
|
What are the three welding inspector certification covered in AWS qc1 |
CAWI CWI scwi |
|
What is generally considered to be the most important quality of a welding inspector |
Professional attitude |
|
The vision requirement for a CWI or near Vision Acuity on |
Jaeger J2 at not less than 12 inches |
|
The acronym Kash stands for |
Knowledge attitude skill and habit |
|
The welding inspector should have a basic understanding of |
Welding process non-destructive testing methods and code and standards |
|
The term used to describe a delay in the production schedule to permit inspection is |
Reference point |
|
Inspection report correction should be made by |
Single line out the error correct the error date an initial |
|
A definition of ethic ethics is |
Using common sense and honesty reporting the correction to the welding Foreman telling the welder what was done ignoring the original error |
|
True or false for communications to be effective it should form a continuous loop |
True |
|
The welding inspector must often communicate with |
Welders supervisors welding Engineers and members of management |
|
Nde personnel are typically certified to what document |
ASNT SNT-TC-1A |
|
True or false you must have a high-school diploma to become a CWI |
False |
|
The CWI exam has several parts these are |
Fundamentals practical and code |
|
True or false The CWI exam requires that the AWS D 1.1 code be used for the open book Code test |
False |
|
True or false CWI exam contains three parts |
True |
|
A title of AWS standard a3.0 is |
Standard welding terms and definitions |
|
True or false API 1104 covers the fabrication of cross-country Bridges |
False |
|
True or false Some of the approve code / standards for the open-book portion of the CWI exam are AWS D 1.1 API 1104 AWS D 1.5 and AWS D15 .1 |
True |
|
Prior to starting a job assignment the welding inspector should determine |
What codes standard or specification applies what inspection should be conducted when inspection should be conducted where records are maintained |