Comptia A+ Certification Practice Test 12 (Exam 220-901)

Front 1

A laser printer component applying high temperature and pressure to bond the toner to the paper is called:

Back 1

Fuser assembly

Front 2

Which of the answers listed below refers to the correct sequence of steps in the laser printing process?

Back 2

Processing, charging, exposing, developing, transferring, fusing, cleaning

Front 3

In impact printing, calibration helps to ensure that the colors and layout represented on the monitor display match the colors and layout of the printed image.

Back 3

False

Front 4

Which of the printer types are used in Point of Sale (PoS) systems?

Back 4

Thermal

Front 5

Which of the following printer types fall(s) into the category of impact printers? (Select all that apply)

Back 5

Daisy wheel

Dot matrix

Front 6

Which type of printer takes advantage of tractor feed during printing process?

Back 6

Impact

Front 7

Which of the printer types listed below provide(s) the capability to produce duplicate pages (multipart forms) during printing process? (Select all that apply)

Back 7

Impact

Dot matrix

Front 8

Which of the following printer types use inked ribbon to produce an imprint on paper? (Select 2 answers)

Back 8

Daisy wheel

Dot matrix

Front 9

A single sheet or roll of printing paper with holes punched along each side is designed for use with:

Back 9

Dot-matrix printers

Front 10

Which of the printing methods utilizes the XPS format?

Back 10

Virtual printing

Front 11

File formats commonly used in virtual printing include: (Select 2 answers)

Back 11

XPS

PDF

Front 12

Which of the following answers refers to a legacy parallel printer port?

Back 12

LPT

Front 13

A language used for describing the appearance of a printed page is called:

Back 13

PCL

Front 14

A Microsoft Windows OS component responsible for representing graphical objects and transmitting them to output devices such as monitors and printers is called:

Back 14

GDI

Front 15

Which of the following allow(s) for print device sharing over a wired connection? (Select all that apply)

Back 15

USB

Parallel

Ethernet

Serial

Front 16

Parallel printer cable connector examples include: (Select 2 answers)

Back 16

Centronics connector

DB-25 connector

Front 17

Which of the answers listed below refer to parallel printer port operation modes? (Select 2 answers)

Back 17

ECP

EPP

Front 18

Examples of network protocols designed to enable remote printing include: (Select 2 answers)

Back 18

IPP

LPD/LPR

Front 19

Which of the following allow(s) for print device sharing over a wireless connection? (Select all that apply)

Back 19

Bluetooth

802.11x

Infrared (IR)

Front 20

What are the characteristic features of fiber-optic cabling? (Select 3 answers)

Back 20

Immunity to electromagnetic interference

Provides higher level of security than copper cabling (difficult to tap into)

More suitable for carrying digital information than copper cabling

Front 21

Which of the answers listed below refer(s) to connector type(s) used with fiber-optic cabling? (Select all that apply)

Back 21

ST

SC

LC

Front 22

RJ-11 and RJ-45 are connector types used with:

Back 22

Twisted-pair cabling

Front 23

An Ethernet crossover cable uses:

Back 23

T568A pin/pair assignment on one end and T568B pin/pair assignment on the opposite end

Front 24

Which of the following connector types are used with coaxial cabling? (Select 2 answers)

Back 24

BNC

F-connector

Front 25

The advantages of multi-mode fiber-optic cabling over single-mode cabling include data transfer rates over longer distances, higher speed, and lower cost.

Back 25

False