Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
What mechanism is used by most inkjet printers to push ink onto the paper? A. Electrostatic discharge B. Gravity C. Air pressure D. Electroconductive plates 
|
D. Most inkjet printers use electroconductive plates to push the ink onto the paper. |
|
|
With a laser printer, what creates the image on the photosensitive drum? A. Primary corona B. Laser imaging unit C. Transfer corona D. Toner
|
B. The laser imaging unit creates an image on the photosensitive drum. |
|
|
What is the proper order of the laser printing process? A. Process, clean, charge, expose, develop, transfer, and fuse B. Process, charge, expose, develop, transfer, fuse, and clean C. Clean, expose, develop, transfer, process, fuse, and charge D. Clean, charge, expose, process, develop, fuse, and transfer
|
B. Process, charge, expose, develop, transfer, fuse, and clean is the proper process. |
|
|
On a dot-matrix printer, what physically strikes the ribbon to form an image? A. Electromagnets B. Printwires C. Character wheel D. Print hammers
|
B. Printwires physically strike the ribbon in dot-matrix printers. |
|
|
Which of these items are considered to be dot-matrix printer consumables? (Select two.) A. Drive motor B. Paper C. Flywheel D. Ribbon
|
B, D. Both paper and ribbons are considered dot-matrix printer consumables. |
|
|
What part must be vacuumed or replaced periodically to prevent damage caused by the action of the corona? A. The rubber rollers B. The ozone filter C. The transfer filter D. The cleaning blade
|
B. The ozone filter should be periodically vacuumed or changed. |
|
|
Which of the following port types most commonly support printers? (Select two.) A. Parallel B. USB C. Infrared D. RS-232
|
A, B. You’ll find almost all printers hooked up to parallel or USB ports. |
|
|
A standalone printer prints a test page just fine, but it makes gobbledygook out of your term paper. What’s probably wrong? A. Out of toner B. Fuser error C. Printer interface D. Faulty software configuration
|
D. The application (software) that is trying to print is probably configured incorrectly. |
|
|
What printing process uses heat-sensitive plastic files embedded with various color dyes? A. Dye-sublimation B. Inkjet C. Ink-dispersion D. Dye-dispersion
|
A. Dye-sublimation printers use heat-sensitive plastic files embedded with various color dyes. |
|
|
Which tool would help you determine why a print job didn’t print? A. Printer driver B. Printer setup C. Print spooler D. System setup
|
C. The print spooler can help you determine why a print job didn’t print. |
