Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
F.R.L
|
Components of a compressor |
|
Correct procedure for installation of FRL unit |
1. The filter, clean the air, protect downstream components 2.the regulator, maintain a set system pressure 3.the lubricator, add a most of oil to the airstream, lubricates downstream components |
|
Front (Term) |
Air line arrangement |
|
The common compressor is the |
Reciprocating |
|
Compressors that have diaphragms are ________ and are used in __________ |
Reciprocating and used in clean air applications |
|
Tank used to store air is called |
Receiving tank |
|
Another name for compressed air systems is |
Pneumatic systems |
|
What cools the air between stages of a two stage compressor |
Pneumatic intercooler |
|
What does relative humidity tell usb |
The water content of air |
|
Multi stage compressors usually have |
More than one cylinder |
|
Where are air dryers installed |
Downstream of the receiver tank |
|
Pressure drop in a compressed air system should not exceed |
5 psi |
|
What component is an air outlet installed with |
Dirt pockets for automatic drains |
|
Air receiver tanks should be equipped with |
Pressure switch, relief valve drain and pressure gauge |
|
What are unloaders for compressors used for? |
To decrease pressure in the cylinder prior to startup |
|
Most compressors are |
Belt driven |
|
Materials used for compressed air systems are generally |
Black iron and sometimes type k and L copper |
|
Horizontal pipes downstream of the receiver should be |
Graded down to drain moisture away from receiver tank |
|
Pressure switches usually have a differential pressure of |
15 psi |
|
Piston type compressors are also known as |
Reciprocating |
|
Aftercoolers are installed |
Between the compressor and receiver |
|
After compression and before use it is often necessary to condition the air and rid it of _______, adjust _______ _______ to match the end use and either add or remove _______ |
Contaminants, system pressure, oil |
|
Compressor unloading |
Reduce pressure in compressor cylinder |
|
Where should pressure relief valves be installed |
On the receiver and are normally set 10 psi above the cut-out pressure setting of the pressure switch |
|
Never _____ the suction piping to less than the compressed intake |
Reduce |
|
What is the delta p (differential pressure) for compressed air systems? |
15 psi |
|
Pressure relief valves should be mounted on the receiver and are normally set to _____ psi above the cut-out pressure setting of the pressure switch. |
10 psi |
|
Front (Term) |
Paint sprayers |