Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
What does the Type Maintenance (TM) Code B means when used on the MAF?
|
Unscheduled Maintenance. Use for all maintenance actions except: Look phase, look and fix phase of all a/c inspection, cal of PME, and transient maintenance.
|
|
What does the Type Maintenance (TM) Code D means when used on the MAF?
|
Daily, Turnaround, Special inspections and Pres/Depres actions.
|
|
What does the Type Maintenance (TM) Code E means when used on the MAF?
|
Acceptanc/Transfer Inspection.
|
|
What does the Type Maintenance (TM) Code F means when used on the MAF?
|
Transient Maintenance
|
|
What does the Type Maintenance (TM) Code G means when used on the MAF?
|
Phase Inspection
|
|
What does the Type Maintenance (TM) Code H means when used on the MAF?
|
Major engine inspections. Uninstalled engines for both look and fix phases.
|
|
What does the Type Maintenance (TM) Code K means when used on the MAF?
|
Special engine inspections. Performed exclusively on engines, installed and uninstall for both look and fix phases.
|
|
What does the Type Maintenance (TM) Code L means when used on the MAF?
|
Local manufacture or fabrication for nonaeronautical material.
|
|
What does the Type Maintenance (TM) Code M means when used on the MAF?
|
Hourly special a/c inspections
|
|
What does the Type Maintenance (TM) Code N means when used on the MAF?
|
Cycle or event special a/c inspections, i.e. rounds fired, arreste landings, launches.
|
|
What does the Type Maintenance (TM) Code P means when used on the MAF?
|
PM, Postlaunch rehabilitation inspection and scheduled cal.
|
|
What does the Type Maintenance (TM) Code S means when used on the MAF?
|
Conditional inspection.
|
|
What does the Type Maintenance (TM) Code T means when used on the MAF?
|
Supply Support
|
|
What does the Type Maintenance (TM) Code U means when used on the MAF?
|
Reclamation and Salvage
|
|
What does the Type Maintenance (TM) Code 1 means when used on the MAF?
|
First Degree Repair
|
|
What does the Type Maintenance (TM) Code 2 means when used on the MAF?
|
Second degree repairs
|
|
What does the Type Maintenance (TM) Code 3 means when used on the MAF?
|
Third degree repairs
|
|
Which TM codes are used by power plants work centers with special engine repair capability?
|
1, 2 and 3
|
|
Which degree repair is designated by IMAs to include repair or replacement of turbine rotors and combustion sections, reduction gearboxes and torque shafts?
|
Second degree repairs.
|